It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?()A. configure static frame relay map entries for each subinterface netw

题目
It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?()

A. configure static frame relay map entries for each subinterface network.

B. remove the ip address from the physical interface

C. create the virtual interfaces with the interface command

D. configure each subinterface with its own IP address

E. disable split horizon to prevent routing loops between the subinterface networks

F. encapsulate the physical interface with multipoint PPP

相似考题

1.Which CLI command displays FECN and BECN information on a Frame Relay interface configured on serial interface 4／0:3／1 ?()A.AB.BC.CD.D

2.Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-type

3.A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()A. Router(config-if)# encapsulation frame-relay q933aB. Router(config-if)# encapsulation frame-relay ansiC. Router(config-if)# encapsulation frame-relay ietfD. Router(config-if)# encapsulation frame-relay islE. None of the above

4.You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy.How would you accomplish this task?（）A. Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.B. Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.C. Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.D. Configure a policy map that has a violate-action to change the DE bit from 0 to 1.

更多“It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?() ”相关问题

  • 第1题：

    When configuring Frame Relay using point－to－point subinterfaces, which of the following must not be configured?()

    A. The local DLCI on each subinterface of the Frame Relay.

    B. The Frame Relay encapsulation on the physical interface.

    C. An IP address on the physical interface.

    D. The subinterface type as point-to-point


    参考答案：C

  • 第2题：

    How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）

    • A、Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the subinterface B
    • B、Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
    • C、Configure many sub-interfaces on the same subnet
    • D、Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces

    正确答案:A

  • 第3题：

    Which three are optional extensions of the Frame Relay Local Management Interface specification？（）

    • A、switched virtual circuit
    • B、virtual circuit status
    • C、simple flow control
    • D、multicasting
    • E、permanent virtual circuit

    正确答案:B,C,D

  • 第4题：

    The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）

    • A、The Gallant router has the wrong LMI type configured
    • B、Inverse ARP is providing the wrong PVC information to the Gallant router
    • C、The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command
    • D、The frame-relay map statement in the Attalla router for the PVC to Steele is not correct
    • E、The IP address on the serial interface of the Attalla router is configured incorrectly

    正确答案:D

  • 第5题：

    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task？（）

    • A、configure static frame relay map entries for each subinterface network.
    • B、remove the ip address from the physical interface
    • C、create the virtual interfaces with the interface command
    • D、configure each subinterface with its own IP address
    • E、disable split horizon to prevent routing loops between the subinterface networks
    • F、encapsulate the physical interface with multipoint PPP

    正确答案:B,C,D

  • 第6题：

    How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）

    • A、Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface.
    • B、Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic.
    • C、Configure many sub-interfaces on the same subnet.
    • D、Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces.

    正确答案:A

  • 第7题：

    单选题
    Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
    A

    frame-relay arp

    B

    frame-relay map

    C

    frame-relay interface-dlci

    D

    frame-relay lmi-type


    正确答案： A
    解析： 暂无解析

  • 第8题：

    多选题
    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?（）
    A

    configure static frame relay map entries for each subinterface network.

    B

    remove the ip address from the physical interface

    C

    create the virtual interfaces with the interface command

    D

    configure each subinterface with its own IP address

    E

    disable split horizon to prevent routing loops between the subinterface networks

    F

    encapsulate the physical interface with multipoint PPP


    正确答案： D,E
    解析： 暂无解析

  • 第9题：

    单选题
    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）
    A

    The Serial0/0 interface is passing traffic.

    B

    The DLCI 100 was dynamically allocated by the router

    C

    The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server

    D

    The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E

    The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    When configuring Frame Relay using point-to-point subinterfaces, which of the following must not be configured?（）
    A

    The local DLCI on each subinterface of the Frame Relay.

    B

    The Frame Relay encapsulation on the physical interface.

    C

    An IP address on the physical interface.

    D

    The subinterface type as point-to-point


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）
    A

    Router(config-if)# encapsulation frame-relay q933a

    B

    Router(config-if)# encapsulation frame-relay ansi

    C

    Router(config-if)# encapsulation frame-relay ietf

    D

    Router(config-if)# encapsulation frame-relay isl

    E

    None of the above


    正确答案： E
    解析： 暂无解析

  • 第12题：

    多选题
    Which three are optional extensions of the Frame Relay Local Management Interface specification？（）
    A

    switched virtual circuit

    B

    virtual circuit status

    C

    simple flow control

    D

    multicasting

    E

    permanent virtual circuit


    正确答案： E,C
    解析： 暂无解析

  • 第13题：

    You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy. How would you accomplish this task?（）

    • A、Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.
    • B、Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.
    • C、Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.
    • D、Configure a policy map that has a violate-action to change the DE bit from 0 to 1.

    正确答案:D

  • 第14题：

    When configuring Frame Relay using point-to-point subinterfaces, which of the following must not be configured?（）

    • A、The local DLCI on each subinterface of the Frame Relay.
    • B、The Frame Relay encapsulation on the physical interface.
    • C、An IP address on the physical interface.
    • D、The subinterface type as point-to-point

    正确答案:C

  • 第15题：

    What is required to enable fragmentation of large FTP packets when voice quality on the network is affected by FTP transfers?（）

    • A、Configure TCP header compression on interface
    • B、Configure MPL on the Frame Relay interfaces
    • C、Configure FRF 12 fragmentation on the Frame Relay interfaces
    • D、Fragmentation is not supported with service internetworking

    正确答案:B

  • 第16题：

    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）

    • A、The Serial0/0 interface is passing traffic.
    • B、The DLCI 100 was dynamically allocated by the router
    • C、The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server
    • D、The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud
    • E、The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

    正确答案:E

  • 第17题：

    Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type

    正确答案:B

  • 第18题：

    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit.Which of the following processes are required to accomplish this task?（）

    • A、configure static frame relay map entries for each subinterface network.
    • B、remove the ip address from the physical interface
    • C、create the virtual interfaces with the interface command
    • D、configure each subinterface with its own IP address
    • E、disable splithorizon to prevent routing loops between the subinterface networks
    • F、encapsulate the physical interface with multipoint PPP

    正确答案:B,C,D

  • 第19题：

    单选题
    The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）
    A

    The Gallant router has the wrong LMI type configured

    B

    Inverse ARP is providing the wrong PVC information to the Gallant router

    C

    The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command

    D

    The frame-relay map statement in the Attalla router for the PVC to Steele is not correct

    E

    The IP address on the serial interface of the Attalla router is configured incorrectly


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy. How would you accomplish this task?（）
    A

    Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.

    B

    Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.

    C

    Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.

    D

    Configure a policy map that has a violate-action to change the DE bit from 0 to 1.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following is true concerning Frame Relay multipoint subinterfaces?（）
    A

    An IP address is required on the physical interface of the central router.

    B

    All routers are required to be fully meshed.

    C

    All routers must be in the same subnet to forward routing updates and broadcasts.

    D

    Multipoint is the default configuration for Frame Relay subinterfaces.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    多选题
    It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task？（）
    A

    configure static frame relay map entries for each subinterface network.

    B

    remove the ip address from the physical interface

    C

    create the virtual interfaces with the interface command

    D

    configure each subinterface with its own IP address

    E

    disable split horizon to prevent routing loops between the subinterface networks

    F

    encapsulate the physical interface with multipoint PPP


    正确答案： F,B
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement is true about the configuration of AutoQoS on a Frame Relay interface？（）
    A

    AutoQoS can be configured from a different subinterface if the DLCI is already assigned to one subinterface 

    B

    Multilink PPP (MLP) over Frame Relay must be manually configured on low speed DLCIs 

    C

    for low-speed Frame Relay DLCIs with Frame Relay-to ATM interworking, the AutoQoS cannot be configured if a virtual template is already configured for the DLCI 

    D

    AutoQoS can be configured on a Frame Relay DLCI only if a map class is attached to the DLCI 


    正确答案： C
    解析： 暂无解析

相关内容