You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy.How would you accomplish this task?（）A. C

题目

You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy.How would you accomplish this task?（）

A. Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.

B. Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.

C. Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.

D. Configure a policy map that has a violate-action to change the DE bit from 0 to 1.

相似考题

1.Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-type

2.You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?()A. Show interface lmiB. Show frame-relay lmiC. Show interface frame-relayD. Debug frame-relay interface.

3.A new frame－relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-typeE. frame-relay pvc

4.A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()A. Router(config-if)# encapsulation frame-relay q933aB. Router(config-if)# encapsulation frame-relay ansiC. Router(config-if)# encapsulation frame-relay ietfD. Router(config-if)# encapsulation frame-relay islE. None of the above

更多“You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed t”相关问题

  • 第1题：

    Which three Layer 2 encapsulation types would be used on a WAN rather than a LAN?()

    A.HDLC

    B.Ethernet

    C.Token Ring

    D.PPP

    E.FDDI

    F.Frame Relay


    参考答案：A, D, F

  • 第2题：

    Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?()

    A.show frame-relay end-to-end

    B.show frame-relay map

    C.show frame-relay lmi

    D.show frame-relay pvc


    参考答案：B

  • 第3题：

    A new frame-relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?（）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type
    • E、frame-relay pvc

    正确答案:B

  • 第4题：

    you want to view the status of a frame relay connection. How to display the status of a Frame-Relay PVC？


    正确答案:show frame-relay pvc and show frame-relay map

  • 第5题：

    Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?（）

    • A、show frame-relay end-to-end
    • B、show frame-relay map
    • C、show frame-relay lmi
    • D、show frame-relay pvc

    正确答案:B

  • 第6题：

    Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type

    正确答案:B

  • 第7题：

    Which three Layer 2 encapsulation types would be used on a WAN rather than a LAN? （）

    • A、HDLC
    • B、Ethernet
    • C、Token Ring
    • D、PPP
    • E、FDDI
    • F、Frame Relay

    正确答案:A,D,F

  • 第8题：

    单选题
    What occurs on a Frame Relay network when the CIR is exceeded?（）
    A

    All TCP traffic is marked discard eligible

    B

    All UDP traffic is marked discard eligible and a BECN is sent

    C

    All TCP traffic is marked discard eligible and a BECN is sent

    D

    All traffic exceeding the CIR is marked discard eligible


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）
    A

    TestKRouter(config-if)# Encapsulation frame-relay dot1q

    B

    TestKRouter(config-if)# Encapsulation frame-relay aal5snap

    C

    TestKRouter(config-if)# Encapsulation frame-relay ietf

    D

    TestKRouter(config-if)# Encapsulation frame-relay isl

    E

    None of the above


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    What occurs on a Frame Relay network when the CIR is exceeded?（）
    A

    All TCP traffic is marked discard eligible.

    B

    All UDP traffic is marked discard eligible and a BECN is sent.

    C

    All TCP traffic is marked discard eligible and a BECN is sent.

    D

    All traffic exceeding the CIR is marked discard eligible.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）
    A

    Router(config-if)# encapsulation frame-relay q933a

    B

    Router(config-if)# encapsulation frame-relay ansi

    C

    Router(config-if)# encapsulation frame-relay ietf

    D

    Router(config-if)# encapsulation frame-relay isl

    E

    None of the above


    正确答案： E
    解析： 暂无解析

  • 第12题：

    which command allows you to verify the encapsulation type (CISCO OR IETF) for a frame relay link?()

    A.show frame-relay map

    B.show frame-relay lmi

    C.show inter serial

    D.show frame-relay pvc


    参考答案：C

  • 第13题：

    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）

    • A、TestKRouter(config-if)# Encapsulation frame-relay dot1q
    • B、TestKRouter(config-if)# Encapsulation frame-relay aal5snap
    • C、TestKRouter(config-if)# Encapsulation frame-relay ietf
    • D、TestKRouter(config-if)# Encapsulation frame-relay isl
    • E、None of the above

    正确答案:C

  • 第14题：

    What does FRTP stand for？（）

    • A、Frame Relay Top Pseudowire
    • B、Frame Relay Traffic Pseudowire
    • C、Frame Relay Traffic Protocol
    • D、Frame Relay Traffic Policing

    正确答案:D

  • 第15题：

    Acme Costume Company is connecting its manufacturing facilties to its stores with a small point-to-multipoint Frame Relay IP WAN. Little growth is expected in the network infrastructure.Up tothis point the company has been using a dial-on-demand network. Dropping WAN costs， however，have led them to consider using a high-speed WAN solution to improve access. Which two routingprotocols could you deploy to support the new larger network while keeping costs down？（）

    • A、 RIP
    • B、 RIPv2
    • C、 EIGRP
    • D、 OSPF

    正确答案:C,D

  • 第16题：

    Which Cisco IOS traffic-shaping mechanism statement is true？ （）

    • A、class-based policing is configured using the Modular QoS command-line （MQC）
    • B、only the Frame Relay traffic-shaping （FRTS） mechanism can interact with a Frame Relay network， adapting to indications of Layer2 congestion in the WAN links
    • C、Distributed Traffic Shaping （DTS） is configured with the police command under the policy map configuration
    • D、both Frame Relay traffic shaping （FRTS） and virtual IP （VIP）-based Distributed Traffic Shaping （DTS） have the ability to mark traffic

    正确答案:A

  • 第17题：

    which command allows you to verify the encapsulation type CISCO OR IETF for a frame relay link?（）

    • A、show frame-relay map
    • B、show frame-relay lmi
    • C、show inter serial
    • D、show frame-relay pvc

    正确答案:C

  • 第18题：

    多选题
    When should traffic shaping be implemented on Frame Relay PVCs？（）
    A

    When you want to drop excess traffic above the CIR

    B

    When there is a speed mismatch between the central site and the remote site

    C

    When using Frame Relay SVCs

    D

    When over-subscribing the central site link

    E

    When LLQ is implemented on the Frame Relay PVC

    F

    When Multilink PPP LFI is implemented on the Frame Relay PVC


    正确答案： A,C
    解析： 暂无解析

  • 第19题：

    单选题
    Your network consists of a large hub - and - spoke Frame Relay network with a CIR of 56 kb/s foreach spoke. Which statement about the selection of a dynamic protocol is true?（）
    A

    EIGRP would be appropriate if LMI type ANS I is NOT used.

    B

    EIGRP would be appropriate, because the Frame Relay spokes could be segmented into their own areas.

    C

    EIGRP would be appropriate, because by default, queries are not propagated across the slow speed Frame Relay links.

    D

    EIGRP would be appropriate, because you can manage how much bandwidth is consumed over the Frame Relay interface.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy. How would you accomplish this task?（）
    A

    Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.

    B

    Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.

    C

    Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.

    D

    Configure a policy map that has a violate-action to change the DE bit from 0 to 1.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?（）
    A

    Show interface lmi

    B

    Show frame-relay lmi

    C

    Show interface frame-relay

    D

    Debug frame-relay interface.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    问答题
    you want to view the status of a frame relay connection. How to display the status of a Frame-Relay PVC？

    正确答案： show frame-relay pvc and show frame-relay map
    解析： 暂无解析

相关内容