You are the network administrator for Ezonexam.com.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100
题目
You are the network administrator for Ezonexam.com.
You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.
During the text portion of the installation, you receive the following error message:
"Stop 0x00000078 Inaccessible_boot_device."
You want to successfully upgrade the computer.
What should you do? (Each answer presents part of the solution. Choose two)
A．Start the computer by using a DOS disk and run FDISK.
B．Update the firmware on the RAID controller.
C．Restart the installation. During the text-mode setup-mode setup, press F6.
D．Restart the installation. During the text-mode setup, create a new partition.
E．Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
相似考题
更多“You are the network administrator for Ezonexam.com.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100”相关问题
-
第1题：
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
正确答案：C
解析：Explanation:Windows2000printersautomaticallyallowWindows2000printerclientstodownloadthecorrectprinterdriver.However,down-levelclients,likeWindowsNT4.0,Windows95andWindows98wouldnotbeabletodownloadprinterdriversautomaticallyiftheWindows2000printserverdoesnothavethedown-levelprinterdrivers.Thesecanbeinstalledseparatelyontheprintserverthoughandthedown-levelclientswouldthenenjoythesameautomaticinstallationofprinterdrivers.Incorrectanswers:A\B\D:ThedriversshouldbeinstalledontheWindows2000printservernotcopied. -
第2题：
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
正确答案：A
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC. -
第3题：
You want to upgrade a Windows NT Server 4.0 computer named Server34 to Windows 2000 Server. Server34 is a member server in a Windows 2000 domain named marketing.fabrikam.local. The domain runs in native mode.
You want to change the role of Server34 from a member server to a domain controller in the same domain. What should you do? (Choose Two)
A．Reinstall Windows NT Server 4.0 on Server34 in the same WINNT folder, and make Server34 a BDC in the marketing domain.
B．Use Server Manager on Server34 and promote Server34 to a PDC for the marketing domain.
C．Upgrade Server34 to Windows 2000 Server.
D．Run the Active Directory installation wizard to make Server34 a domain controller in the marketing.fabrikam.local domain.
E．Run the Active Directory installation wizard to convert Server34 to a domain controller in the marketing.fabrikam.local domain.
正确答案：CD
解析：Explanation: To upgrade a Windows NT 4.0 member server to a Windows 2000 Domain Controller we must first upgrade the Windows NT 4.0 member server to Windows 2000 Server and then install Active Directory Services through the Active Directory Installation Wizard, which can be started with the DCPROMO.EXE command or by the Configure Your Server utility in Administrative tools.
Incorrect answers:
A: It is not necessary to reinstall Windows NT 4.0 as Windows NT 4.0 is already installed on the computer. The Windows NT member server can be upgraded to a Windows 2000 member server, then promoted to a domain controller.
B: A Windows NT 4.0 member server cannot be upgraded to a domain controller. Only Windows 2000 member servers can be promoted to domain controllers.
E: We cannot install Active Directory services on a Windows 4.0 server.
-
第4题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.
The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
A．On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
B．On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
正确答案：D
解析：Explanation: We upgrade Ezonexam1. We have no choice that the upgraded Windows 2000 Server will be a domain controller. We are then able to use the dcpromo.exe utility to remove the Active Directory and demote the Domain controller to a member server.
Incorrect Answers
A: It is not necessary to format the stripe set containing the employee data. This proposed solution would work, but it is not the fastest method.
B: A dual-boot system is not necessary.
C: You cannot upgrade a Windows NT 4.0 domain controller to a Windows 2000 member server. The Windows 2000 Server will be a domain controller.
-
第5题：
You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.
You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.
You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.
You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?
A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.
B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.
C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.
D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
正确答案：A
解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.
Incorrect answers:
B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.
-
第6题：
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
正确答案：D
解析：Explanation: To install Windows 2000 Server on computers from source files that are located on a centralized network share we would have to connect to the network share from the the computers. If the computers do not have PXE-compliant network cards we would have to make a network boot disk that the computers can use connect to the network share. We would start the installation process by using winnt with /s /u /udf switches. We must use winnt and not winnt32 as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.
Incorrect answers:
A: Makebt32 is used to create a set of four setup floppy disks.
B: The boot diskette must include network drivers.
C: Dsclient.exe is a directory service client for Windows 9x. It cannot be used to start an installation of Windows 2000.
E: The installation process cannot be started by using a Windows 2000 emergency repair disk.
-
第7题：
You are the network administrator for Ezonexam.
ServerEzonexam14 is a Windows NT Server 4.0 computer. ServerEzonexam14 is also a member server in a Windows 2000 domain named marketing.Ezonexam.local. The marketing.Ezonexam.local domain also has five Windows NT Server 4.0 backup domain controllers.
You want to upgrade ServerEzonexam14 to a Windows 2000 member server in the marketing.Ezonexam.local domain. You also want to be able to implement Universal Groups in the marketing.Ezonexam.local domain.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Reinstall Windows NT Server 4.0 on ServerEzonexam14 in the same WINNT folder, and make ServerEzonexam14 a BDC in the marketing domain.
B. Run the Active Directory Installation Wizard to make ServerEzonexam14 a domain controller in the marketing.Ezonexam.local domain.
C. Run the Active Directory Installation Wizard to convert ServerEzonexam14 to a domain controller in the fabrikam.local domain.
D. Upgrade all the Windows NT Server 4.0 backup domain controllers in marketing.Ezonexam.local to Windows 2000 Server.
E. Upgrade all the Windows NT Server 4.0 backup domain controllers in Ezonexam.local to Windows 2000 Server.
F. Upgrade ServerEzonexam14 to Windows 2000 Server.
G. Upgrade the marketing.Ezonexam.local domain to native mode.
正确答案：DFG
D,F,G 解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration. A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported. Thus to comply with the requirements of having universal groups and upgrading ServerEzonexam14 to a Windows 2000 member server in the marketing.Ezonexam.local domain, options D, F and G is the solution.
Incorrect answers:
A: A backup domain controller (BDC) - In a Windows NT Server domain, a computer that receives a copy of the domain's security policy and domain database and authenticates network logons. It provides a backup if the primary domain controller (PDC) becomes unavailable. A domain is not required to have a BDC. This is not what is required.
B: Making ServerEzonexam14 a domain controller is not the same as upgrading it to a Windows 2000 member server. A member server must be upgraded to a domain controller.
C: You should be upgrading ServerEzonexam14 to a Windows 2000 Member server in the marketing.Ezonexam.local domain and not the fabrikam.local domain.
E: This option is faulty since it asks for the upgrading of the domain controllers in Ezonexam.local instead of marketing.Ezonexam.local.
-
第8题：
You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.
You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.
However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
You are unable to perform. the upgrade. What should you do to resolve the problem?
A．Convert the system partition to NTFS.
B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
正确答案：C
解析：Explanation:WhenupgradingearlierversionsofWindowstoWindows2000wemustusewinnt32.exeandmustlaunchitfromwithintheWindowsenvironment.Incorrectanswers:A:Windows2000canbeinstalledorupgradedonadiskorpartitionthatisformattedwiththeFATfilesystem.ThereisthusnoneedtoconvertthefilesystemtoNTFS.B:TheAdvancedConfigurationandPowerInterfaceisusedforpowermanagementanddoesnotaffecttheinstallationorupgradeprocess.ItwouldthusnotbenecessarytodisableACPI.D:ThesetupfloppydisksuseWinnt.exetoinstallWindows2000.WehowevercanonlyusethesetupfloppydiskstoinstallacleancopyofWindows2000onthecomputer.WecannotupgradetheoperatingsystemtoWindows2000usingthesetupfloppydisks.Wemustusewinnt32.exetoupgradeearlierversionsofWindowstoWindows2000. -
第9题：
You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）
- A、Add the virtual disks to IDE Controller 0.
- B、Add the virtual disks to an existing SCSI controller.
- C、Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.
- D、Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.
正确答案:B -
第10题：
You are a network administrator for your company. All servers run Windows Server 2003. You manage a server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a separate controller. One of the hard disks that contains the data volume fails. You discover that the failure was caused by a faulty SCSI controller. You replace the SCSI controller. You need to restore the data volume to its previous state. You need to achieve this goal by using the minimum amount of administrative effort. What should you do? （）
- A、Run the diskpart active command to activate the failed volume.
- B、Convert both disks to basic disks, and then restore the data.
- C、Break the mirror, and then re-create the mirror.
- D、Select a disk in the mirror, and then reactivate the volume.
正确答案:D -
第11题：
You are a network administrator for your company. All servers run Windows Server 2003. You manage a server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a separate controller. One of the hard disks that contains the data volume fails. You discover that the failure was caused by a faulty SCSI controller. You replace the SCSI controller. You need to restore the data volume to its previous state. You need to achieve this goal by using the minimum amount of administrative effort. What should you do?（）
- A、Run the diskpart active command to activate the failed volume.
- B、Convert both disks to basic disks, and then restore the data.
- C、Break the mirror, and then re-create the mirror.
- D、Select a disk in the mirror, and then reactivate the volume.
正确答案:D -
第12题：
单选题You need to improve the speed of backups on SQL1. Management has approved the purchase of additional hard disks for this server. What should you do？（）AConfigure the hard disks as a RAID-0 array， and store the backups on this new array.
BConfigure the hard disks as a RAID-5 array， and store the backups on this new array.
CConfigure the hard disks as a RAID-10 array， and store the backups on this new array.
DConfigure the hard disks as a spanned volume， and store the backups on this new volume.
EUse the hard disks to extend the volume that currently holds SQL Server backups.
正确答案： B解析： 暂无解析 -
第13题：
You are the network administrator for Ezonexam.
Ezonexam14 is one of 10 Windows NT Server 4.0 member servers in a Windows 2000 domain named marketing.Ezonexam.local. The marketing domain also has five Windows NT 4.0 backup domain controllers. The marketing.Ezonexam.local domain is the child domain of Ezonexam's root domain, Ezonexam.local.
You want to upgrade Ezonexam14 to Windows 2000 Server and change the role of Ezonexam14 from a member server to a domain controller in the same domain. You also want to be able to implement Universal Groups in the marketing domain.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Upgrade all of the Windows NT Server 4.0 member servers in the marketing domain to Windows 2000 Server.
B. Upgrade all of the Windows Server 4.0 backup domain controllers in the marketing domain to Windows 2000 Server.
C. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 a domain controller in the marketing.Ezonexam.local domain.
D. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 to a domain controller in the Ezonexam.local domain.
E. Use the Active Directory Domains and Trusts tool to change the Ezonexam.local domain mode to native mode.
F. Use the Active Directory Domains and Trusts to change the marketing.Ezonexam.local domain mode to native mode.
正确答案：BCF
B,C,F 解析：Explanation: A backup domain controller (BDC) - In a Windows NT Server domain, a computer that receives a copy of the domain's security policy and domain database and authenticates network logons. It provides a backup if the primary domain controller (PDC) becomes unavailable.
Once a server has been installed with Windows Server 2000, you can upgrade it to a domain controller through the Dcpromo utility.
Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.
Incorrect answers:
A: You should be upgrading the domain controllers and not the member servers.
D: This option is faulty since it asks for the upgrading of the domain controllers in Ezonexam.local instead of marketing.Ezonexam.local.
E: This option is faulty as it should be changing the marketing.Ezonexam.local domain and not the Ezonexam.local domain. -
第14题：
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".
Which two actions should you take to eliminate the STOP error? (Choose Two)
A. Modify the Boot.ini file.
B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
C. Select Safe Mode from the Windows 2000 boot menu.
D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
E. Install a driver for the RAID controller form. a floppy disk.
F. Use Device Manager to update the driver for the RAID controller.
正确答案：BE
B,E 解析：Explanation: The boot drive is inaccessible and only the text mode partition of the installation process was successful. We need to install the correct driver for the boot disk. We do this by restarting the installation process from the Windows 2000 installation CD, and during the early part of Setup, we watch the bottom of the screen for a line that prompts us to press F6. Then we press F6 and install the RAID driver from the diskette.
Incorrect answers:
A: The boot.ini points to the correct partition, but the correct drivers have not been installed yet.
C: The boot menu is not reached.
D: We must use the Windows 2000 Server CD-ROM to restart the installation process.
F: We will not be able to start the Device Manager. The installation process has failed.
-
第15题：
You are the network administrator for Ezonexam.com.
You are planning to upgrade 10 Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You have used the distribution folder to successfully upgrade other Windows NT Server 4.0 computers to Windows 2000. For these 10 new upgrades you wan to include a new service pack.
You need to include the new service pack in the distribution folder so that the service pack is automatically installed during the upgrade process.
What should you do?
A．Create a sub folder named $OEM$\$C\SP under the i386 folder. Copy the new service pack to that subfolder.
B．Create a subfolder named $OEM$\$$\SP under the i386 folder. Copy the new service pack to that subfolder.
C．Run Update.exe from the new service pack and specify the -s option.
D．Run winnt32 on the Windows NT Server 4.0 computers and specify the /u option
正确答案：C
解析：Explanation: Running the update.exe command installs hotfixes and service packs, etc. -
第16题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.
Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.
You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.
What should you do?
(Each correct answer presents part of the solution. Choose two.)
A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0
B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.
D．Make any user accounts on Ezonexam1 members of Domain Global groups.
E．Convert the Windows 2000 domains to native mode.
正确答案：CE
解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration.
A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.
Since Ezonexam1 is a backup domain controller, requires the use of universal groups and cannot run the application, you need to upgrade Ezonexam1 to a member server, make it a domain controller and after the upgrade demote the domain controller as well as convert the Windows 2000 domains to native mode so as to be able to run the new application.
Incorrect answers:
A: This will not allow the application to run.
B: You need to demote the domain controller to member server after the upgrade.
D: You need to make provision for universal groups as required in the question. Even though universal groups can contain domain global groups, this is not what is required.
-
第17题：
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.
You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.
What should you do? (Choose all that apply)
A．Convert the system partition to NTFS.
B．Install service pack4 or later on the server.
C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
正确答案：B
解析：Explanation: To ensure that no application data or user data is lost during the upgrade the following two steps will be taken:
1. Install service pack4 (B).
2. Start the installation process from within the Windows environment and select the option to upgrade (almost C, but not quite).
Incorrect answers:
A: NTFS is not required
C: You can't upgrade to Windows 2000 by booting from the CD. The CD must be run from within the NT environment.
D: It is not necessary to install a standard NT Server 4.0 server.
-
第18题：
You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.
You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.
D. Create a stripped volume using Disk2, Disk3, and Disk4.
E. Create a RAID-5 volume using all disks.
F. Create a stripped volume using all disks.
G. Select the volume on Disk0 and add a mirror using Disk1.
正确答案：BCG
B,C,G 解析：Explanation: RAID-5 volume is where data is written to 3 to 32 physical disks at the same rate, and is interlaced with parity to provide fault tolerance for a single disk failure. Good read performance; good utilization of disk capacity; expensive in terms of processor utilization and write performance as parity must be calculated during write operations.
Only Windows 2000 supports dynamic storage. To support dynamic storage, a single partition is created that includes the entire disk. A disk that you initialize for dynamic storage is a dynamic disk. Dynamic disks are divided into volumes, which can consist of a portion or portions of one or more physical disks. A dynamic disk can contain simple volumes, spanned volumes, striped volumes (RAID-0), mirrored volumes (RAID-1), and striped with parity volumes (RAID-5). You create a dynamic disk by upgrading a basic disk. A Mirrored volume is where two disks contain identical copies of data. The only software RAID supported on the system volume. Good read and write performance; excellent fault tolerance; but costly in terms of disk utilization, because 50 percent of the volume's potential capacity is used for data redundancy.
Incorrect answers:
A: It is not necessary to install Windows 2000 Server on a 4-GB NTFS partition on Disk0. Disk0 consists of 18-GB.
D: Striped volume is where data is written to 2 to 32 physical disks at the same rate. It offers maximum performance and capacity but no fault tolerance.
E: The main disadvantage of a RAID-5 volume is that once a drive fails, system performance suffers until you rebuild the RAID-5 volume. This is because the parity information must be recalculated through memory to reconstruct the missing drive. If more than one drive fails, the RAID-5 volume becomes inaccessible. This does not bode well for fault tolerance as is required in this question.
F: Striped volumes do not provide fault tolerance.
-
第19题：
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B．Select Safe Mode from the Windows 2000 boot menu.
C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D．Install a driver for the SCSI controller from a floppy disk.
E．Use Device Manager to update the driver for the SCSI controller.
正确答案：AD
解析：Explanation: To solve the problem posed in this scenario we must restart the Windows 2000 installation process and supply the correct SCSI driver. We cannot use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6 again to supply the driver for a mass storage controller to the Windows 2000 Setup program.
Incorrect answers:
B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.
C: We need to Windows 2000 Server CD-ROM to be able to perform. the install process.
E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet. -
第20题：
You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）
- A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
- B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.
- C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted.
- D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
正确答案:A -
第21题：
Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）
- A、Can’t be done.
- B、You need to put Windows 2000 on a separate partition from Windows NT 4.0
- C、You need to put Windows 2000 on the same partition as Windows NT 4.0.
- D、You need to upgrade Windows NT 4.0 to SP4.
正确答案:D -
第22题：
You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）
- A、Ask a domain administrator to authorize the RIS server.
- B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.
- C、Install RIS on the domain controller. Copy the RIS image to the domain controller.
- D、Add a reservation for the RIS server to the DHCP server.
正确答案:A -
第23题：
单选题Windows NT 4.0 is currently on the system you are using, and you want to install Windows 2000 Professional. Windows NT 4.0 is currently on an NFTS partition. For some reason you have decided that you are not going to upgrade, but rather, you are going to run this in a dual boot fashion. What do you need to do? （）ACan’t be done.
BYou need to put Windows 2000 on a separate partition from Windows NT 4.0
CYou need to put Windows 2000 on the same partition as Windows NT 4.0.
DYou need to upgrade Windows NT 4.0 to SP4.
正确答案： A解析： If you want to make NTFS （V4） for Windows NT 4.0 to be compatible with NTFS （V5） of windows 2000， service pack 4 is required for Windows NT 4.0. You can put both operating system i.e. Windows NT 4.0 and Windows 2000 Professional on the same partition or on the different partition but recommended option is to place the windows 2000 professional on the different partition from windows NT 4.0.