You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the serv
题目
You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.
You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.
You want to successfully install Windows 2000 Server on the computer.
What should you do? (Each correct answer presents part of the solution. Choose two)
A．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.
B．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.
C．Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.
D．Insert a disk with the original SCSI firmware.
E．Insert a disk with the OEM SCSI driver.
相似考题
更多“You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the serv”相关问题
-
第1题：
You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.
Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.
You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?
A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.
B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.
C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.
D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
正确答案：C
解析：Explanation:Windows2000printersautomaticallyallowWindows2000printerclientstodownloadthecorrectprinterdriver.However,down-levelclients,likeWindowsNT4.0,Windows95andWindows98wouldnotbeabletodownloadprinterdriversautomaticallyiftheWindows2000printserverdoesnothavethedown-levelprinterdrivers.Thesecanbeinstalledseparatelyontheprintserverthoughandthedown-levelclientswouldthenenjoythesameautomaticinstallationofprinterdrivers.Incorrectanswers:A\B\D:ThedriversshouldbeinstalledontheWindows2000printservernotcopied. -
第2题：
You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.
You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.
You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.
What should you do?
A．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.
B．Copy the Windows NT policy file to the 20 Windows NT Workstation computers.
C．Create a Windows 2000 Group Policy that denies user access to My Network Places.
D．Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.
正确答案：C
解析：Explanation: Windows NT 4.0 system polices affect computers running Windows NT 4.0. The Windows NT computers in this scenario are being used as Terminals for the Windows 2000 Server computer that is running Terminal Services. In effect the Windows NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server. This can be done by using a group policy.
Incorrect answers:
A: System policy templates only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.
B: Windows NT policies only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.
D: The NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server.
-
第3题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.
Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.
You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.
What should you do?
(Each correct answer presents part of the solution. Choose two.)
A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0
B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.
D．Make any user accounts on Ezonexam1 members of Domain Global groups.
E．Convert the Windows 2000 domains to native mode.
正确答案：CE
解析：Explanation: A member server is a Windows Server 200 server that has been installed as a non-domain controller and joined to a domain. This allows the server to operate as a file, print, and application server without the overhead of account administration.
A domain controller is a Windows Server 2000 computer that is configured to store the domain database, commonly referred to as Active Directory. Native-mode domains have additional features that are unavailable to mixed-mode domains, but no longer support NT 4 domain controllers. In order to support universal groups, the domain must be configured for Windows 2000/2003 native mode. If the domain is configured for Windows 2000/2003 mixed mode (which supports Windows NT 4.0), then universal groups are not supported.
Since Ezonexam1 is a backup domain controller, requires the use of universal groups and cannot run the application, you need to upgrade Ezonexam1 to a member server, make it a domain controller and after the upgrade demote the domain controller as well as convert the Windows 2000 domains to native mode so as to be able to run the new application.
Incorrect answers:
A: This will not allow the application to run.
B: You need to demote the domain controller to member server after the upgrade.
D: You need to make provision for universal groups as required in the question. Even though universal groups can contain domain global groups, this is not what is required.
-
第4题：
You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.
You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.
What should you do? (Choose all that apply)
A．Convert the system partition to NTFS.
B．Install service pack4 or later on the server.
C．Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
D．Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
正确答案：B
解析：Explanation: To ensure that no application data or user data is lost during the upgrade the following two steps will be taken:
1. Install service pack4 (B).
2. Start the installation process from within the Windows environment and select the option to upgrade (almost C, but not quite).
Incorrect answers:
A: NTFS is not required
C: You can't upgrade to Windows 2000 by booting from the CD. The CD must be run from within the NT environment.
D: It is not necessary to install a standard NT Server 4.0 server.
-
第5题：
You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.
You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.
C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.
D. Create a stripped volume using Disk2, Disk3, and Disk4.
E. Create a RAID-5 volume using all disks.
F. Create a stripped volume using all disks.
G. Select the volume on Disk0 and add a mirror using Disk1.
正确答案：BCG
B,C,G 解析：Explanation: RAID-5 volume is where data is written to 3 to 32 physical disks at the same rate, and is interlaced with parity to provide fault tolerance for a single disk failure. Good read performance; good utilization of disk capacity; expensive in terms of processor utilization and write performance as parity must be calculated during write operations.
Only Windows 2000 supports dynamic storage. To support dynamic storage, a single partition is created that includes the entire disk. A disk that you initialize for dynamic storage is a dynamic disk. Dynamic disks are divided into volumes, which can consist of a portion or portions of one or more physical disks. A dynamic disk can contain simple volumes, spanned volumes, striped volumes (RAID-0), mirrored volumes (RAID-1), and striped with parity volumes (RAID-5). You create a dynamic disk by upgrading a basic disk. A Mirrored volume is where two disks contain identical copies of data. The only software RAID supported on the system volume. Good read and write performance; excellent fault tolerance; but costly in terms of disk utilization, because 50 percent of the volume's potential capacity is used for data redundancy.
Incorrect answers:
A: It is not necessary to install Windows 2000 Server on a 4-GB NTFS partition on Disk0. Disk0 consists of 18-GB.
D: Striped volume is where data is written to 2 to 32 physical disks at the same rate. It offers maximum performance and capacity but no fault tolerance.
E: The main disadvantage of a RAID-5 volume is that once a drive fails, system performance suffers until you rebuild the RAID-5 volume. This is because the parity information must be recalculated through memory to reconstruct the missing drive. If more than one drive fails, the RAID-5 volume becomes inaccessible. This does not bode well for fault tolerance as is required in this question.
F: Striped volumes do not provide fault tolerance.
-
第6题：
You are the network administrator for Ezonexam.com.
You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.
During the text portion of the installation, you receive the following error message:
"Stop 0x00000078 Inaccessible_boot_device."
You want to successfully upgrade the computer.
What should you do? (Each answer presents part of the solution. Choose two)
A．Start the computer by using a DOS disk and run FDISK.
B．Update the firmware on the RAID controller.
C．Restart the installation. During the text-mode setup-mode setup, press F6.
D．Restart the installation. During the text-mode setup, create a new partition.
E．Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
正确答案：CE
解析：Explanation:Assoonasyourmachinebootsintothetext-basedportionofSetup,youmaynoticeapromptatthebottomofthescreenthattellsyoutopressF6ifyouneedtoinstalladditionalSCSIorRAIDdrivers.Ifyoudon'twanttheseadditionaldrivers,justwaitafewsecondsanditwillgoaway.ButifyoursystemhasaSCSIorRAIDcontrollerthatyouknowisn'tgoingtoinitializewithoutanOEM-provideddriver,you'llneedtowatchthispartofSetupcloselyandhitF6.You'llneedtopressF6atthePressF6prompttoinstallSCSIdrivers.ThiswillletyouaccessyourSCSIharddrivesorCD-ROMsthatrequireadriver.Incorrectanswers:A:Thisissimilartocreatingapartition.Thereisnoneedtocreateanewpartition.Thiswillnotupgradethecomputersuccessfully.B:Thisisnotrequired.UpdatingfirmwareontheRAIDcontrollerwillnotenableyoutosuccessfullyupgradethecomputerinthiscase.D:Thereisnoneedtocreateanewpartition,youshouldpressF6whichwillallowyoutosuccessfullyupgradethecomputerbyallowingaccesstotheharddrivesorfloppyorCD-ROMdrivesthatrequiresdrivers. -
第7题：
You create a virtual machine （VM） on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do？（）
- A、Add the virtual disks to IDE Controller 0.
- B、Add the virtual disks to an existing SCSI controller.
- C、Remove the virtual DVD drive， and add the virtual disks to IDE Controller1.
- D、Add five SCSI controllers to the VM， and add one virtual disk to each SCSI controller.
正确答案:B -
第8题：
Your network contains a database server that runs Windows Server 2003 Standard Edition Service Pack 2 (SP2). The server has 1 GB of RAM and a single hard disk. Queries against the databases on the server are very slow. You discover that the hard disk on the server is very active. You are evaluating whether to add RAM to the server. You need to use System Monitor to find out whether adding RAM will decrease disk activity. Which performance counter should you monitor? （）
- A、LogicalDisk : % Free Space
- B、Memory : Pages Faults/sec
- C、Memory : Free System Page Table Entries
- D、Server Work Queues : Queue Length
正确答案:B -
第9题：
You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）
- A、Ask a domain administrator to authorize the RIS server.
- B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.
- C、Install RIS on the domain controller. Copy the RIS image to the domain controller.
- D、Add a reservation for the RIS server to the DHCP server.
正确答案:A -
第10题：
You are a network administrator for your company. All servers run Windows Server 2003. You manage a server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a separate controller. One of the hard disks that contains the data volume fails. You discover that the failure was caused by a faulty SCSI controller. You replace the SCSI controller. You need to restore the data volume to its previous state. You need to achieve this goal by using the minimum amount of administrative effort. What should you do?（）
- A、Run the diskpart active command to activate the failed volume.
- B、Convert both disks to basic disks, and then restore the data.
- C、Break the mirror, and then re-create the mirror.
- D、Select a disk in the mirror, and then reactivate the volume.
正确答案:D -
第11题：
单选题You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）AInstall a DHCP server.
BInstall a WINS server. Configure each computer to use WINS.
CCreate an Lmhost file on each computer.
DCreate a Hosts file on each computer.
正确答案： B解析： 暂无解析 -
第12题：
多选题You use Microsoft System Center Virtual Machine Manager （VMM） 2008 R2 to perform physical-to-virtual （P2V） conversion s . Your companys network includes computers that each run one of the following operating systems ： Windows NT 4.0 Server with SP6a Windows 2000 Server with SP4 Windows Server 2003 with SP2 Windows Web Server 2008 R2 You need to choose the operating systems that can be converted by using the online P2V method. Which two operating systems should you choose？（）AWindows NT 4.0 Server with SP6a
BWindows 2000 Server with SP4
CWindows Server 2003 with SP2
DWindows Web Server 2008 R2
正确答案： D,B解析： 暂无解析 -
第13题：
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.
You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.
What should you do?
A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.
B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.
C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.
D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
正确答案：A
解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC. -
第14题：
You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com's Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.
The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.
Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.
You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?
A．On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.
B．On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.
C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
D．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
正确答案：D
解析：Explanation: We upgrade Ezonexam1. We have no choice that the upgraded Windows 2000 Server will be a domain controller. We are then able to use the dcpromo.exe utility to remove the Active Directory and demote the Domain controller to a member server.
Incorrect Answers
A: It is not necessary to format the stripe set containing the employee data. This proposed solution would work, but it is not the fastest method.
B: A dual-boot system is not necessary.
C: You cannot upgrade a Windows NT 4.0 domain controller to a Windows 2000 member server. The Windows 2000 Server will be a domain controller.
-
第15题：
You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.
You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.
You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.
You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?
A．Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.
B．Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.
C．Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.
D．Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
正确答案：A
解析：Explanation: We want to upgrade the NT domain to an Active Directory domain; particularly we want to migrate the NT user accounts. First we need to promote server1 to PDC since it contains the master copy of domain information - SAM. Then upgrade the PDC to Windows 2000 Server. Active Directory requires a DNS server that supports SRV (service records). The UNIX DNS server supports this.
Incorrect answers:
B: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
C: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network and Active Directory does not require a WINS server.
D: Server1 must be upgraded to PDC before Windows 2000 is installed. Furthermore, there is already a DNS server on the network.
-
第16题：
Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.
The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.
What should you do?
A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.
B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.
D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.
E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
正确答案：D
解析：Explanation: To install Windows 2000 Server on computers from source files that are located on a centralized network share we would have to connect to the network share from the the computers. If the computers do not have PXE-compliant network cards we would have to make a network boot disk that the computers can use connect to the network share. We would start the installation process by using winnt with /s /u /udf switches. We must use winnt and not winnt32 as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.
Incorrect answers:
A: Makebt32 is used to create a set of four setup floppy disks.
B: The boot diskette must include network drivers.
C: Dsclient.exe is a directory service client for Windows 9x. It cannot be used to start an installation of Windows 2000.
E: The installation process cannot be started by using a Windows 2000 emergency repair disk.
-
第17题：
You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.
When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."
Which two actions should you take to eliminate the STOP error? (Choose Two)
A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.
B．Select Safe Mode from the Windows 2000 boot menu.
C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.
D．Install a driver for the SCSI controller from a floppy disk.
E．Use Device Manager to update the driver for the SCSI controller.
正确答案：AD
解析：Explanation: To solve the problem posed in this scenario we must restart the Windows 2000 installation process and supply the correct SCSI driver. We cannot use Device Manager or Safe Mode at this stage since Windows 2000 is not installed yet. We must press F6 when Setup prompts us to do so. We must then press F6 again to supply the driver for a mass storage controller to the Windows 2000 Setup program.
Incorrect answers:
B: We cannot use Safe Mode at this stage, as Windows 2000 is not installed yet.
C: We need to Windows 2000 Server CD-ROM to be able to perform. the install process.
E: The Device Manager cannot be used at this stage since Windows 2000 is not installed yet. -
第18题：
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）
- A、Install a DHCP server.
- B、Install a WINS server. Configure each computer to use WINS.
- C、Create an Lmhost file on each computer.
- D、Create a Hosts file on each computer.
正确答案:A -
第19题：
You use Microsoft System Center Virtual Machine Manager （VMM） 2008 R2 to perform physical-to-virtual （P2V） conversion s . Your companys network includes computers that each run one of the following operating systems ： Windows NT 4.0 Server with SP6a Windows 2000 Server with SP4 Windows Server 2003 with SP2 Windows Web Server 2008 R2 You need to choose the operating systems that can be converted by using the online P2V method. Which two operating systems should you choose？（）
- A、Windows NT 4.0 Server with SP6a
- B、Windows 2000 Server with SP4
- C、Windows Server 2003 with SP2
- D、Windows Web Server 2008 R2
正确答案:C,D -
第20题：
You are a network administrator for your company. All servers run Windows Server 2003. You manage a server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a separate controller. One of the hard disks that contains the data volume fails. You discover that the failure was caused by a faulty SCSI controller. You replace the SCSI controller. You need to restore the data volume to its previous state. You need to achieve this goal by using the minimum amount of administrative effort. What should you do? （）
- A、Run the diskpart active command to activate the failed volume.
- B、Convert both disks to basic disks, and then restore the data.
- C、Break the mirror, and then re-create the mirror.
- D、Select a disk in the mirror, and then reactivate the volume.
正确答案:D -
第21题：
Your network contains a database server that runs Windows Server 2003 Standard Edition Service Pack 2 (SP2). The server has 1 GB of RAM and a single hard disk. Queries against the databases on the server are very slow. You discover that the hard disk on the server is very active. You are evaluating whether to add RAM to the server. You need to use System Monitor to find out whether adding RAM will decrease disk activity. Which performance counter should you monitor? （）
- A、LogicalDisk : % Free Space
- B、Memory : Pages Faults/sec
- C、Memory : Free System Page Table Entries
- D、Server Work Queues : Queue Length
正确答案:B -
第22题：
You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers. According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network. You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network. What should you do？ （）
- A、 On each domain controller, disable Server Message Block (SMB) signing and encryption of the secure channel traffic.
- B、 Replace all Windows 98 computers with new Windows XP Professional computers.
- C、 Install the Active Directory Client Extensions software on the Windows 98 computers.
- D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.
正确答案:B -
第23题：
单选题You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）AAsk a domain administrator to authorize the RIS server.
BGrant the Everyone group Allow - Read NTFS permission on the RIS image.
CInstall RIS on the domain controller. Copy the RIS image to the domain controller.
DAdd a reservation for the RIS server to the DHCP server.
正确答案： C解析： 暂无解析