Which two statements describe characteristics of IPv6 unicast addressing?()A. Global addresses start with 2000::/3.B. Link-local addresses start with FE00:/12.C. Link-local addresses start with FF00::/10.D. There is only one loopback address and it is ::1

题目
Which two statements describe characteristics of IPv6 unicast addressing?()

A. Global addresses start with 2000::/3.

B. Link-local addresses start with FE00:/12.

C. Link-local addresses start with FF00::/10.

D. There is only one loopback address and it is ::1.

E. If a global address is assigned to an interface, then that is the only allowable address for the interface.

相似考题

1.An ATM PVC is configured as atm pvc 1 0 101 aal5snap 256 128 100 .Which three statements describe the traffic management characteristics of this interface?()A.AB.BC.CD.DE.E

2.Which two of these statements best describe the benefits of WPAv2？ （Choose two.）（）A、 SSID broadcast preventionB、 man-in-the-middle attack protectionC、 cost reduction through software upgrades in all existing hardwareD、 dynamic key generationE、 RF jamming prevention

3.Which two statements are characteristics of pin groups?（）A、they are used internally within fcoe to map a vsan to a specifc vlanB、they pin traffic fro a specific compute node mezzanine card to aspecific up link portC、an iplink port for the adapter is chosen automatically if no pin group is set

4.Which two of these correctly describe Fibre Channel? ()A. supports multiple protocolsB. works only in a shared or loop environmentC. allows addressing for up to 4 million nodesD. allows addressing for up to 8 million nodesE. provides a high speed transport for SCSI payloadsF. may stretch to a distance of up to100 km before needing extenders

更多“Which two statements describe characteristics of IPv6 unicast addressing?() ”相关问题

  • 第1题：

    Which two statements are true about Unicast Reverse Path Forwarding Loose Mode？（）

    • A、It is used in multihome network scenarios.
    • B、It can be used with BGP to mitigate DoS and DDoS.
    • C、It does not need to have CEF enabled.
    • D、It is enabled via the interface level command ip verify unicast reverse-path.
    • E、It cannot be used with "classification" access lists.

    正确答案:A,B

  • 第2题：

    Which two characteristics describe the UDP protocol?（）

    • A、limited error checking
    • B、defined timers
    • C、no recovery mechanisms
    • D、three-way handshake

    正确答案:A,C

  • 第3题：

    Which two of these statements best describe the benefits of WPAv1？ （）

    • A、 SSID broadcast prevention
    • B、 Improved mutual authentication
    • C、 Improved encryption through AES
    • D、 Improved protection against sniffing initialization vectors
    • E、 RF jamming prevention

    正确答案:B,D

  • 第4题：

    Which two statements describe characteristics of IPv6 unicast addressing?（）

    • A、Global addresses start with 2000::/3.
    • B、Link-local addresses start with FE00:/12.
    • C、Link-local addresses start with FF00::/10.
    • D、There is only one loopback address and it is ::1.
    • E、If a global address is assigned to an interface, then that is the only allowable address for the interface.

    正确答案:A,D

  • 第5题：

    Which two of these correctly describe Fibre Channel？（）

    • A、 supports multiple protocols
    • B、 works only in a shared or loop environment
    • C、 allows addressing for up to 4 million nodes
    • D、 allows addressing for up to 8 million nodes
    • E、 provides a high speed transport for SCSI payloads
    • F、 may stretch to a distance of up to 100 km before needing extenders

    正确答案:A,E

  • 第6题：

    Which two statements describe the advantages to the use of RIP over the use of OSPF?（）

    • A、RIP requires less time to converge
    • B、RIP uses less bandwidth
    • C、RIP is less complex to configure
    • D、RIP demands fewer router resources
    • E、RIP has a more accurate metric

    正确答案:C,D

  • 第7题：

    Which command must be globally enabled on a Cisco router to support IPv6?（）

    • A、ip routing ipv6
    • B、ipv6 unicast - routing
    • C、ipv6 routing
    • D、ip classless
    • E、ipv6 cef

    正确答案:B

  • 第8题：

    多选题
    Which two of these correctly describe Fibre Channel？（）
    A

    supports multiple protocols

    B

    works only in a shared or loop environment

    C

    allows addressing for up to 4 million nodes

    D

    allows addressing for up to 8 million nodes

    E

    provides a high speed transport for SCSI payloads

    F

    may stretch to a distance of up to 100 km before needing extenders


    正确答案： F,D
    解析： 暂无解析

  • 第9题：

    多选题
    Which two of these statements best describe the benefits of WPAv2？ （Choose two.）（）
    A

    SSID broadcast prevention

    B

    man-in-the-middle attack protection

    C

    cost reduction through software upgrades in all existing hardware

    D

    dynamic key generation

    E

    RF jamming prevention


    正确答案： D,C
    解析： 暂无解析

  • 第10题：

    多选题
    Which two of these statements best describe the benefits of WPAv1？ （）
    A

    SSID broadcast prevention

    B

    Improved mutual authentication

    C

    Improved encryption through AES

    D

    Improved protection against sniffing initialization vectors

    E

    RF jamming prevention


    正确答案： A,E
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements describe the criteria bandwidth detection uses to dynamically alter bandwidth allocation?（）(Choose two.)
    A

    Throughput is raised as latency decreases.

    B

    Throughput is based on available bandwidth.

    C

    Throughput is lowered as latency decreases.

    D

    Latency is measured by SYNs returned for each metapacket.


    正确答案： B,A
    解析： 暂无解析

  • 第12题：

    多选题
    Which two characteristics describe the UDP protocol?（）
    A

    limited error checking

    B

    defined timers

    C

    no recovery mechanisms

    D

    three-way handshake


    正确答案： B,C
    解析： 暂无解析

  • 第13题：

    Which two statements correctly describe characteristics of the PortFast feature？ （）

    • A、STP will be disabled on the port.
    • B、PortFast can also be configured on trunk ports.
    • C、PortFast is required to enable port-based BPDU guard.
    • D、PortFast is used for both STP and RSTP host ports.
    • E、PortFast is used for STP-only host ports.

    正确答案:B,D

  • 第14题：

    Which two statements accurately describe an IBGP peering session?（） (Choose two.)

    • A、Peers are statically defined.
    • B、Peers exist within the same AS.
    • C、Peers must be directly connected to each other.
    • D、Peers advertise routes learned from other IBGP neighbors.

    正确答案:A,B

  • 第15题：

    Which two are characteristics of an IPv6 multicast address？（）

    • A、First （most significant ） octet is FF in hex
    • B、Starts with a prefix of FE80 to FEBF in hex
    • C、Starts with a prefix of FECO to FEFF in hex
    • D、Second octet contains a 4-bit multicast scope field
    • E、Last 64 bit contains the modified MAC address of the Ethernet interface
    • F、Is allocated from the unicast address space

    正确答案:A,D

  • 第16题：

    Which command enables IPv6 forwarding on a cisco router?（）

    • A、ipv6 host
    • B、ipv6 unicast-routing
    • C、ipv6 local
    • D、ipv6 neighbor

    正确答案:B

  • 第17题：

    Which two of these correctly describe Fibre Channel? （）

    • A、supports multiple protocols
    • B、works only in a shared or loop environment
    • C、allows addressing for up to 4 million nodes
    • D、allows addressing for up to 8 million nodes
    • E、provides a high speed transport for SCSI payloads
    • F、may stretch to a distance of up to100 km before needing extenders

    正确答案:A,E

  • 第18题：

    Which two of these statements are true of IPv6 address representation?（）

    • A、There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast.
    • B、A single interface may be assigned multiple IPv6 addresses of any type.
    • C、Every IPv6 interface contains at least one loopback address.
    • D、The first 64 bits represent the dynamically created interface ID.
    • E、Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.

    正确答案:B,C

  • 第19题：

    Which two of these statements best describe fast secure roaming？ （Choose two.）（）  

    • A、 available only in autonomous APs
    • B、 available in autonomous and lightweight APs
    • C、 a feature of WDS in autonomous APs
    • D、 a feature of WDS in lightweight APs
    • E、 requires at least one AP and one Wireless LAN Services Module

    正确答案:B,C

  • 第20题：

    多选题
    Which two of these statements best describe fast secure roaming？ （Choose two.）（）
    A

    available only in autonomous APs

    B

    available in autonomous and lightweight APs

    C

    a feature of WDS in autonomous APs

    D

    a feature of WDS in lightweight APs

    E

    requires at least one AP and one Wireless LAN Services Module


    正确答案： E,B
    解析： 暂无解析

  • 第21题：

    多选题
    Which two of these statements are true of IPv6 address representation? （）
    A

    There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast.

    B

    A single interface may be assigned multiple IPv6 addresses of any type.

    C

    Every IPv6 interface contains at least one loopback address.

    D

    The first 64 bits represent the dynamically created interface ID.

    E

    Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.


    正确答案： E,C
    解析： 暂无解析

  • 第22题：

    多选题
    Which two statements describe the advantages to the use of RIP over the use of OSPF?（）
    A

    RIP requires less time to converge

    B

    RIP uses less bandwidth

    C

    RIP is less complex to configure

    D

    RIP demands fewer router resources

    E

    RIP has a more accurate metric


    正确答案： D,E
    解析： 暂无解析

  • 第23题：

    多选题
    Which two statements correctly describe characteristics of the PortFast feature？ （）
    A

    STP will be disabled on the port.

    B

    PortFast can also be configured on trunk ports.

    C

    PortFast is required to enable port-based BPDU guard.

    D

    PortFast is used for both STP and RSTP host ports.

    E

    PortFast is used for STP-only host ports.


    正确答案： A,C
    解析： 暂无解析

相关内容