Mooring winch should be equipped with mechanical brakes which are capable of holding ______.
A.half the breaking strength of the mooring line
B.the full breaking strength of the mooring line
C.the maximum expected tension of the mooring line
D.50% over the working tension of the mooring line
第1题:
A liferaft which has inflated bottom-up on the water ______.
A.should be righted by standing on the carbon dioxide cylinder,holding the righting straps and leaning backwards
B.should be righted by standing on the life line,holding the righting straps leaning backwards
C.will right itself when the canopy tube inflates
D.must be cleared of the buoyant equipment before it will right itself
第2题:
Given the same water depth and line tension, the holding power of a 19 pound / foot wire rope mooring system in comparison to the holding power of a 90 pound / foot chain mooring system will be ______.
A.weaker
B.equal
C.greater
D.Indeterminable
第3题:
In order to pay out or slack a mooring line which is under strain, you should ______.
A.sluice the line
B.surge the line
C.stopper the line
D.slip the line
第4题:
position the boat at the embarkation station
lift the boat off the inboard chocks
energize the winch for the falls
set the brake on the winch
第5题:
Tanks for the storage of drinking water
Ballast tanks to prevent the boat from capsizing
A hydraulic start diesel engine
Auxiliary mechanical propulsion (Fleming gear)
第6题:
add fluid that is the same color as the fluid in the reservoir
add turbine oil because it is always a good substitute
add any oil that has the same viscosity as the hydraulic fluid
check the winch manufacturers instruction book
第7题:
a mooring winch
a hoisting winch
a slewing winch
a luffing winch
第8题:
a warp end
a mooring winch
a worm gear
a barrel
第9题:
increase
decrease
fluctuate
remain constant
第10题:
more slack in the mooring lines
a strain on the mooring lines
chafing gear on the mooring lines
grease on the mooring lines
第11题:
Put one line at the low point and one at the high point of the bollard so they don't touch
Take the eye of the second line up through the eye of the first line before putting the second line on the bollard
Never put two mooring lines on the same bollard
The mooring line forward should be put on the bollard first
第12题:
entirely constant pressure
entirely constant temperature
a combination of constant volume and constant pressure
a combination of constant temperature and constant pressure
第13题:
Which device is designed to automatically hold the load if power should fail to an electric winch?
A.Pneumatic brake
B.Electromagnetic brake
C.Hand brake
D.Motor controller
第14题:
If two mooring lines are to be placed on the same bollard,which method is BEST?______.
A.Place the eye from the forward line on the bollard and then place the eye from the second line directly over the first
B.It makes no difference how the lines are placed
C.Place the eye from either line on the bollard,and then bring the eye of the other line up through the eye of the first,and place it on the bollard
D.Place both eyes on the bollard,in any manner,but lead both lines to the same winch head on the vessel and secure them on the winch
第15题:
On a Windows XP machine, which of the following settings should be configured to allow draggingof files without holding the mouse button?()
第16题:
sluice the line
surge the line
stopper the line
slip the line
第17题:
a short length of line used for temporarily holding another line
a snatch block for handling a topping lift
an engine order telegraph
the brake on a cargo winch
第18题:
Constant tension mooring winch system
Hatch cover system
Watertight door system
Internal combustion engine hydraulic starter system
第19题:
excessive loads are placed on the winch
minimum pull is being exerted by the winch
automatic operation of the winch is desired
wire is being retrieved at the maximum rate
第20题:
half the breaking strength of the mooring line
the full breaking strength of the mooring line
the maximum expected tension of the mooring line
50% over the working tension of the mooring line
第21题:
Place the eye from the forward line on the bollard and then place the eye from the second line directly over the first
It makes no difference how the lines are placed
Place the eye from either line on the bollard,and then bring the eye of the other line up through the eye of the first,and place it on the bollard
Place both eyes on the bollard,in any manner,but lead both lines to the same winch head on the vessel and secure them on the winch
第22题:
weaker
equal
greater
indeterminable
第23题:
Pneumatic brake
Electromagnetic brake
Hand brake
Motor controller