The indication of a slipping anchor is a(n)______.
A.Decrease in mooring line length
B.Increase in the opposite amperage
C.Increase in the opposite line tension
D.Decrease in mooring line tension and amperage
第1题:
The fluke angle of an anchor system is the angle between the ______.
A.flukes and the shank
B.shank and the sea bottom
C.mooring line and the sea bottom
D.flukes and the shackle
第2题:
Why should you soak an anchor ________.
A.It can prevent the anchor from slipping during pretensioning
B.It will lubricate all the moving parts of a stock anchor
C.It will increase the maximum breaking strength of the anchor chain
D.It will make it easier to disassemble the anchor for repair
第3题:
By paying out more anchor cable, you ______.
A.decrease the holding power of your anchor
B.decrease the swing of your vessel while at anchor
C.increase the holding power of your anchor
D.increase the possibility that your vessel will drag anchor
第4题:
Mooring-Line的作用是()。
第5题:
Using a small scope ratio
Replacing that portion with a short length of chain
Using a hockle to keep that portion of the anchor line off the bottom
Using a synthetic line
第6题:
permanent chasing system
wire rope mooring system
shepherd's crook mooring system
spring buoy mooring system
第7题:
It allows the bottom soil to consolidate
It gives the palms time to trip the anchor
It stabilizes the mooring system
It lubricates the anchor for better tripping
第8题:
boilers
bow thrusters
stabilizers
hatch covers
第9题:
maximum sustained vertical load an anchor will resist before dragging
maximum sustained horizontal load an anchor will resist before dragging
maximum sustained vertical load an anchor will resist before the mooring line breaks
maximum sustained horizontal load an anchor will resist before the mooring line breaks
第10题:
Increasing radar range to a fixed object ahead
Drift lead with the line leading perpendicular to the centerline
Vibrations felt by placing a hand on the cable
Changing bearings to distant fixed objects abeam
第11题:
cable lifters
spur wheels
bollard
warpends
第12题:
any wire rope used for mooring
a fire-warp
a mooring line running diagonally to the keel
a mooring line perpendicular to the keel
第13题:
What provides little or no indication that a vessel is dragging anchor ________.
A.Increasing radar range to a fixed object ahead
B.Drift lead with the line leading perpendicular to the centerline
C.Vibrations felt by placing a hand on the cable
D.Changing bearings to distant fixed objects abeam
第14题:
Where do fatigue failures of wire rope mooring lines usually occur ________.
A.In the middle part of the line length
B.Near the socketed end fitting adjacent to the anchor
C.At the point where the line touches the bottom
D.At the place the anchor buoy is attached to the line
第15题:
In a combination chain and wire rope mooring system, the anchor chain is deployed at the anchor end of the line to ______.
A.increase fatigue life of the system
B.reduce the time to retrieve the line
C.increase the holding power
D.reduce the catenary
第16题:
备锚,摇“备车”钟。()
第17题:
increase fatigue life of the system
reduce the time to retrieve the line
increase the holding power
reduce the catenary
第18题:
The type of anchor and mooring line being used
The type of bottom in which the ship is anchored
A significant difference between air and water temperature
The chain contacting a chock or fairlead between the tensiometer and the lower swivel fairlead
第19题:
half the breaking strength of the mooring line
the full breaking strength of the mooring line
the maximum expected tension of the mooring line
50% over the working tension of the mooring line
第20题:
Maximum mooring line tension divided by the anchor's weight in air
Anchor's weight in air divided by the maximum mooring line tension
Preloading tension divided by the anchor's weight in air
Operating tension divided by the anchor's weight in air
第21题:
bow mooring/stern line
forward spring/after spring
forward breast rope/forward spring
slip rope/stern line
第22题:
decrease in mooring line length
increase in the opposite amperage
increase in the opposite line tension
decrease in mooring line tension and amperage
第23题:
Put one line at the low point and one at the high point of the bollard so they don't touch
Take the eye of the second line up through the eye of the first line before putting the second line on the bollard
Never put two mooring lines on the same bollard
The mooring line forward should be put on the bollard first