单选题A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A DLPAR functions ar

题目
单选题
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
A

DLPAR functions are not available for cloned partitions

B

The new partition has the same node number as the original LPAR

C

Additional filesets need to be reinstalled after the alt_disk_install cloning

D

The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

相似考题

1.After connecting a PC to an available port on a switch, you find that the PC can not access any of the resources on the LAN. No other PC's connected to the switch appear to be having any issues. What is the most likely cause for this problem?A．The router lacks a routing table entry for the new hostB．The host switch port is assigned to the incorrect VLANC．The host MAC address is incorrectly configuredD．A STP instance for the new host has not been initializedE．The switch does not have the MAC address hard coded in the CAM table.

2.You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?（）A. Mismatched LMI types.B. Incompatible encapsulation types.C. Mismatching IP addresses.D. Incorrect DLCI.E. None of the above

3. A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

4.The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A DLPAR functions ar”相关问题

  • 第1题：

    A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）

    • A、The Power 550 is licensed for three LPARs only.
    • B、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.
    • C、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.
    • D、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.

    正确答案:D

  • 第2题：

    Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC. What is the probable cause?（）

    • A、APV key is not registered
    • B、Networking and DNS are not configured
    • C、/etc/hosts table on HMC is not configured
    • D、Virtual IO Server dose not support DLPAR

    正确答案:B

  • 第3题：

    A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）

    • A、Add or remove the resources in the profile, click 'apply', then 'save'.
    • B、Add or remove the resources using DLPAR and change the partition profile.
    • C、Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
    • D、Add or remove the resources in the system profile and reboot the managed system.

    正确答案:B

  • 第4题：

    The nfsstat -c command shows zero badxid， but retrans and timeouts are sizeable， what is the most probable cause of the problem？（）

    • A、 Too many nfsd’s running
    • B、 Client and server with different buffer sizes
    • C、 Bridges， routers or gateways are receiving too many fragmentated packets
    • D、 Too few nfsd’s running

    正确答案:B

  • 第5题：

    SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）

    • A、SLES does not perform well with DHCP
    • B、SLES was installed with the default host name of Linux
    • C、Virtual Network Resources are being used, which is not supported in a SLES environment
    • D、The SLES instance was installed in 32-bit mode, where 64-bit should have been selected

    正确答案:B

  • 第6题：

    单选题
    The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
    A

    It is a hardware problem caused by the power failure.

    B

    There is a network problem, most probably with name resolution.

    C

    Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.

    D

    Some filesets may be marked as broken and need to be reinstalled.


    正确答案： C
    解析： 暂无解析

  • 第7题：

    单选题
    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
    A

    The LPAR Configuration backup is corrupt

    B

    The LPAR Configuration has been altered using DLPAR

    C

    The LPAR Configuration backup was performed on a different HMC

    D

    The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    The nfsstat -c command shows zero badxid， but retrans and timeouts are sizeable， what is the most probable cause of the problem？（）
    A

     Too many nfsd’s running

    B

     Client and server with different buffer sizes

    C

     Bridges， routers or gateways are receiving too many fragmentated packets

    D

     Too few nfsd’s running


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）
    A

    The Power 550 is licensed for three LPARs only.

    B

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.

    C

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.

    D

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC. What is the probable cause?（）
    A

    APV key is not registered

    B

    Networking and DNS are not configured

    C

    /etc/hosts table on HMC is not configured

    D

    Virtual IO Server dose not support DLPAR


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC. What is the probable cause?（）
    A

    APV key is not registered

    B

    Networking and DNS are not configured

    C

    /etc/hosts table on HMC is not configured

    D

    Virtual IO Server dose not support DLPAR


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

    • A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
    • B、Use DLPAR to move resources from the test LPAR to training when training is active
    • C、Install Partition Load Manager to share resources between the test and training environments
    • D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

    正确答案:D

  • 第14题：

    Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）

    • A、The resources must be unallocated in an LPAR
    • B、The microcode on the pSeries must be current
    • C、All network adapters on the LPAR must be defined
    • D、Network connectivity and name resolution capability between HMC and LPARs

    正确答案:D

  • 第15题：

    An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）

    • A、DNS is not working properly
    • B、Ping is not working properly
    • C、The cables are disconnected
    • D、The device driver did not load properly

    正确答案:D

  • 第16题：

    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

    • A、The LPAR Configuration backup is corrupt
    • B、The LPAR Configuration has been altered using DLPAR
    • C、The LPAR Configuration backup was performed on a different HMC
    • D、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

    正确答案:B

  • 第17题：

    单选题
    A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）
    A

    Add or remove the resources in the profile, click 'apply', then 'save'.

    B

    Add or remove the resources using DLPAR and change the partition profile.

    C

    Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.

    D

    Add or remove the resources in the system profile and reboot the managed system.


    正确答案： A
    解析： 暂无解析

  • 第18题：

    单选题
    An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）
    A

    DNS is not working properly

    B

    Ping is not working properly

    C

    The cables are disconnected

    D

    The device driver did not load properly


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）
    A

    The resources must be unallocated in an LPAR

    B

    The microcode on the pSeries must be current

    C

    All network adapters on the LPAR must be defined

    D

    Network connectivity and name resolution capability between HMC and LPARs


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
    A

    DLPAR functions are not available for cloned partitions

    B

    The new partition has the same node number as the original LPAR

    C

    Additional filesets need to be reinstalled after the alt_disk_install cloning

    D

    The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?（）
    A

    Mismatched LMI types.

    B

    Incompatible encapsulation types.

    C

    Mismatching IP addresses.

    D

    Incorrect DLCI.

    E

    None of the above


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）
    A

    SLES does not perform well with DHCP

    B

    SLES was installed with the default host name of Linux

    C

    Virtual Network Resources are being used, which is not supported in a SLES environment

    D

    The SLES instance was installed in 32-bit mode, where 64-bit should have been selected


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    After using the alt_disk_install command to clone a system image to another disk, the system administrator noticed a large number of defined devices not allocated to the LPAR. Which of the following is the most likely cause of this situation?（）
    A

    The cfgmgr command was not run to reconfigure the devices

    B

    The machine was not booted into SMS MultiBoot mode after configuration

    C

    The machine was not in full system partition mode when the volume was created

    D

    The alt_disk_install command was not run with the -O option to remove references in the ODM


    正确答案： C
    解析： 暂无解析

相关内容