You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely ca

题目

You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?（）

A. Mismatched LMI types.

B. Incompatible encapsulation types.

C. Mismatching IP addresses.

D. Incorrect DLCI.

E. None of the above

相似考题

1.You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.

2.A new frame－relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-typeE. frame-relay pvc

3.You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash

4.A new frame relay connection is being brought up. Which of the following are frame relay LMI type options that can be configured on this new link?()A. EIA/TIAB. Q.932C. Q.933AD. IEEEE. CiscoF. Annex D

更多“You are trying to bring up a new Testking location onto your existing frame relay network. ”相关问题

  • 第1题：

    You are a technician at TestKing. Your newly appointed TestKing trainee is setting up a new frame relay connection to a remote branch and wants to know what the valid options for frame relay LMI types are.What would your reply be?（）

    A. EIA/TIA

    B. Q.932

    C. Q.933 A

    D. IEEE

    E. IETF

    F. Cisco

    G. ANSI


    参考答案：C, F, G

  • 第2题：

    A new frame-relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?（）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type
    • E、frame-relay pvc

    正确答案:B

  • 第3题：

    You are a technician at TestKing. Your newly appointed TestKing trainee is setting up a new frame relay connection to a remote branch and wants to know what the valid options for frame relay LMI types are.What would your reply be?（）

    • A、EIA/TIA
    • B、Q.932
    • C、Q.933 A
    • D、IEEE
    • E、IETF
    • F、Cisco
    • G、ANSI

    正确答案:C,F,G

  • 第4题：

    A new frame relay connection is being brought up. Which of the following are frame relay LMI type options that can be configured on this new link?（）

    • A、EIA/TIA
    • B、Q.932
    • C、Q.933A
    • D、IEEE
    • E、Cisco
    • F、Annex D

    正确答案:C,E,F

  • 第5题：

    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）

    • A、 Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.
    • B、 This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.
    • C、 The router at RemoteB must be replaced by a Cisco router.
    • D、 Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.
    • E、 There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.

    正确答案:D

  • 第6题：

    You are implementing a new frame relay network to provide connectivity between you offices. To do this, you set up the frame relay network using point-to-point subinterfaces.Which of the following does NOT need to be configured?（）

    • A、The Frame Relay encapsulation on the physical interface.
    • B、The local DLCI on each subinterface.
    • C、An IP address on the physical interface.
    • D、The subinterface type as point-to-point.

    正确答案:C

  • 第7题：

    单选题
    You are implementing a new frame relay network to provide connectivity between you offices. To do this, you set up the frame relay network using point-to-point subinterfaces.Which of the following does NOT need to be configured?（）
    A

    The Frame Relay encapsulation on the physical interface.

    B

    The local DLCI on each subinterface.

    C

    An IP address on the physical interface.

    D

    The subinterface type as point-to-point.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）
    A

    TestKRouter(config-if)# Encapsulation frame-relay dot1q

    B

    TestKRouter(config-if)# Encapsulation frame-relay aal5snap

    C

    TestKRouter(config-if)# Encapsulation frame-relay ietf

    D

    TestKRouter(config-if)# Encapsulation frame-relay isl

    E

    None of the above


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）
    A

    STP

    B

    GVRP

    C

    SNMP

    D

    VTP

    E

    DHCP


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    In order to troubleshoot an issue with the Testking frame relay network, you log into a remote router via a telnet session and issue the command "debug frame-relay lmi". After a long wait, you fail to see any output. What could be the cause of this problem?（）
    A

    The IP addresses are configured incorrectly.

    B

    Frame Relay LMI messages not displayed in real time.

    C

    The administrator must issue the enable frame-relay lmi debug command.

    D

    The administrator must issue the terminal monitor command.

    E

    Debug messages can only be received once through the console port.

    F

    The administrator must issue the show frame-relay lmi vty 0 4 command


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?（）
    A

    Show interface lmi

    B

    Show frame-relay lmi

    C

    Show interface frame-relay

    D

    Debug frame-relay interface.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）
    A

    Router# copy tftp flash

    B

    Router# copy flash run

    C

    Router(config)# restore flash

    D

    Router(config)# repair flash

    E

    Router#copy flash tftp

    F

    Router# copy start flash


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which of the following Frame-Relay encapsulation commands would you use, if you had to connect your Cisco router to a non-Cisco router?（）

    • A、TestKRouter(config-if)# Encapsulation frame-relay dot1q
    • B、TestKRouter(config-if)# Encapsulation frame-relay aal5snap
    • C、TestKRouter(config-if)# Encapsulation frame-relay ietf
    • D、TestKRouter(config-if)# Encapsulation frame-relay isl
    • E、None of the above

    正确答案:C

  • 第14题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    • A、Router# copy tftp flash
    • B、Router# copy flash run
    • C、Router(config)# restore flash
    • D、Router(config)# repair flash
    • E、Router#copy flash tftp
    • F、Router# copy start flash

    正确答案:A

  • 第15题：

    In order to troubleshoot an issue with the Testking frame relay network, you log into a remote router via a telnet session and issue the command "debug frame-relay lmi". After a long wait, you fail to see any output. What could be the cause of this problem?（）

    • A、The IP addresses are configured incorrectly.
    • B、Frame Relay LMI messages not displayed in real time.
    • C、The administrator must issue the enable frame-relay lmi debug command.
    • D、The administrator must issue the terminal monitor command.
    • E、Debug messages can only be received once through the console port.
    • F、The administrator must issue the show frame-relay lmi vty 0 4 command

    正确答案:D

  • 第16题：

    You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?（）

    • A、Mismatched LMI types.
    • B、Incompatible encapsulation types.
    • C、Mismatching IP addresses.
    • D、Incorrect DLCI.
    • E、None of the above

    正确答案:B

  • 第17题：

    which command allows you to verify the encapsulation type CISCO OR IETF for a frame relay link?（）

    • A、show frame-relay map
    • B、show frame-relay lmi
    • C、show inter serial
    • D、show frame-relay pvc

    正确答案:C

  • 第18题：

    Your network contains an internal network and a perimeter network. You have one Exchange Server 2010 server on the internal network. You install Windows Server 2008 R2 on a new server in the perimeter network. You need to ensure that you can install the Edge Transport server role on the new server.  What should you do（）？ 

    • A、Join the new server to an Active Directory domain.
    • B、Install Active？Directory Lightweight Directory Services on the new server.
    • C、Run ImportEdgeConfig.ps1 on the existing Exchange Server 2010 server.
    • D、Open TCP port 88 and TCP port 3268 on the firewall between the perimeter network and the internal network.

    正确答案:B

  • 第19题：

    多选题
    You are a technician at TestKing. Your newly appointed TestKing trainee is setting up a new frame relay connection to a remote branch and wants to know what the valid options for frame relay LMI types are.What would your reply be?（）
    A

    EIA/TIA

    B

    Q.932

    C

    Q.933 A

    D

    IEEE

    E

    IETF

    F

    Cisco

    G

    ANSI


    正确答案： E,A
    解析： 暂无解析

  • 第20题：

    单选题
    You decided to change the location of the flash recovery area. You executed the following command： Which statement is true？（）
    A

    The location can be changed only if the flash recovery area is empty.

    B

    After executing the command， all new flash recovery area files will be created in the new location.

    C

    The command will generate an error because you cannot change the flash recovery area while the database is open.

    D

    All the existing files in the flash recovery area will be moved to the new location， and all new Flash Recovery Area files will be created in the new location.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    You are the network administrator for TestKing.com. All network servers run Windows Server 2003. The network includes a file server named Testking1. Testking1 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. Testking1 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintenance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to function. What should you do?（）
    A

    Name the new server Testking1. Create a new mirrored volume by using two 72-GB disks. Connect Testking2 to the network and copy the data from Testking1. When copying is complete, shut down the old Testking1.

    B

    Name the new server Testking1. Move both disks from the old Testking1 to the new Testking1. Scan the disks for changes. Import the disks.Connect the new Testking1 to the network.

    C

    Name the new server Testking1. Break the mirror on the old Testking1. Move one of the disks from the old Testking1 to the new Testking1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new Testking1 to the network.

    D

    Name the new server Testking1. Remove one of the disks in the mirror from the old Testking1. Move the disk on the new Testking1. Scan the disk for changes. Import the disk, Shut down the old Testking1 and connect the new Testking1 to the network.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    You create a new dial-up connection to connect to the Internet. You configure the Internet connection to enable Internet Connection Sharing. However， you cannot see or connect to any shared resource on your network. What should you do？（）
    A

    Configure the dial-up connection to disable shared access.

    B

    Configure the dial-up connection to disable on-demand dialing.

    C

    Disable data encryption in the new dial-up connection.

    D

    Use the ipconfig command to release and renew your network TCP/P address.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are the network administrator for . All network servers run Windows Server 2003. The network includes a file server named TestKing17. TestKing17 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. TestKing17 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintainance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to functions. What should you do?（）
    A

    Name the new server TestKing20. Create a new mirrored volume by using two 72-GB disks. Connect TestKing20 to the network and copy the data from TestKing17. When copying is complete, shut down the old TestKing17.

    B

    Name the new server TestKing17. Move both disks from the old TestKing17 to the new TestKing17. Scan the disks for changes.Connect the new TestKing17 to the network.

    C

    Name the new server TestKing17. Break the mirror on the old TestKing17. Move one of the disks from the old TestKing17 to the new TestKing17. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new TestKing17 to the network.

    D

    Name the new server TestKing17. Remove one of the disks in the mirror from the old TestKing17. Move the disk to the new TestKing17. Scan the disk for changes. Import the disk. Shut down the old TestKing17 and connect the new TestKing17 to the network.


    正确答案： C
    解析： 暂无解析

  • 第24题：

    多选题
    A new frame relay connection is being brought up. Which of the following are frame relay LMI type options that can be configured on this new link?（）
    A

    EIA/TIA

    B

    Q.932

    C

    Q.933A

    D

    IEEE

    E

    Cisco

    F

    Annex D


    正确答案： F,B
    解析： 暂无解析

相关内容