单选题In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）A One per nodeB Only oneC Two in the primary nodeD None

第1题：

You want to create a template to be used as a standard for all company reports, which are many different styles. How many different templates must you have if you plan to use multiple report styles?（）

• A、Two 
• B、One 
• C、One per report style
• D、One per report style + one more

第2题：

On an existing two-node cluster， the system is configured with RAID5 SSA as the shared disk.  When adding a new node to the cluster， what must be taken into consideration？（）  

• A、 Nothing，SSA can support a maximum of 8 initiators per loop.
• B、 The RAID5 implementation on SSA will only support two initiators per loop.
• C、 SSA can only support four initiators per lop when using the fat write option.
• D、 The RAID implementation can be used with three initiators only if the fast write cache option is used on all adapters.

第3题：

During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned  as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable.  To facilitate disk heartbeating，how many disks per node and how many networks will be required？（）  

• A、 One disk per node，one network
• B、 Two disks per node，one network
• C、 Two disks per node，six networks
• D、 Two disks per node，three networks

第4题：

Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）

• A、Have one VIO server with striped disks for all LPARs
• B、Have one VIO server with mirrored disks for all LPARs
• C、Have two VIO servers with each LPAR accessing both VIO servers
• D、Have two VIO servers with each LPAR accessing a different VIO server

第5题：

Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete， and it has been tested on all of the nodes in the three node HACMP cluster.  How does the customer migrate to the new storage server with minimum down time？（）

• A、 Shut down one node at a time and let the other node serve the application
• B、 Stop HACMP with the forced option and perform migration of the disks on one node，then restart HACMP
• C、 Stop both nodes and perform the migration all at once using standard AIX commands in parallel， then restart the cluster
• D、 Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks， then remove the old disks with C-SPOC

第6题：

You are the network administrator for TestKing. All network servers run Windows Server 2003. You administer a server named TestKing76. You need to configure TestKing76 to function as a streaming media server for TestKing.com's content team. The content team wants TestKing76 to provide the fastest performance and the most available space possible. Redundancy is not import. TestKing76 currently has three identical, unpartitioned hard disks available. You need to configure the disks to meet the content team's requirements. What should you do?（）

• A、Create a simple volume on disk and then expand it to the other two disks.
• B、Create a mirrored volume that uses two of the disks.
• C、Create a RAID-5 volume that uses all three disks.
• D、Create a striped volume that uses all three disks.

第7题：

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

In an 8-socket x3950 server， with disks on both nodes， how many ServeRAID 8 adapters are needed to implement RAID？ All disks must be used.（）

• A、One per node
• B、Only one
• C、Two in the primary node
• D、None

第14题：

How many VLANs on the UCS must be configured when using FCoE?（）

• A、One per blade
• B、One per VSAN
• C、One per fabric
• D、None are required

第15题：

A customer has an xSeries x445 server attached to a DS4500 storage server containing two EXP710 disk expansion drawers with 14 disks in each.  The x445 is to be used for a video streaming application.  The customer wants to make the most cost-effective use of the disk capacity while retaining fault tolerance.  Which of the following solutions will satisfy the requirements？（）

• A、Create two RAID-10e arrays， one per disk expansion drawer
• B、Create a single RAID-10 array across the two disk expansion drawers
• C、Create a single RAID-5 array across both disk drawers utilizing all disks
• D、Create four RAID-5 arrays in 6+P format with two arrays to each disk expansion drawer

第16题：

The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors.  The system is a test system to run AIX 5.2.  The customer has stated a preference for internal disks for the boot devices.  The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）

• A、It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.
• B、It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.
• C、It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.
• D、It can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.

第17题：

You are the network administrator for All network servers run Windows Server 2003. A server named TK1 contains a mirrored volume that consists of two 36-GB disks. Both disks are used for data storage. TK1 also contains a third unallocated dynamic disk. Next week, a database that currently requires 45 GB of disk space will be installed on TK1. This database will grow at a rate of 10 percent every 6 months. You need to realocate disk space on TK1. Your realocation must satisfy the space requirements of the new database, and it must also ensure that data will remain available in case of disk failure. First, you break the mirror and delete all volumes on the disks. What should you do next?（）

• A、Create a spanned volume.
• B、Create a stripped volume.
• C、Create a mirrored volume.
• D、Create a RAID-5 volume.

第18题：

Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）

• A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 
• B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 
• C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 
• D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

第19题：

第20题：

第21题：

第22题：

第23题：

第24题：