单选题A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）A The hard drive is not formatted.B The BIOS is

题目
单选题
A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）
A

The hard drive is not formatted.

B

The BIOS is corrupted.

C

The motherboard has faulty capacitors.

D

The drive cable is backwards

相似考题

1.When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?()A. The memory is failing.B. The CPU is overheating.C. The hard drive is not attached properly.D. The operating system is not installed.

2.When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?（）A、The memory is failing.B、The CPU is overheating.C、The hard drive is not attached properly.D、The operating system is not installed.

3.A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）A、Optical driveB、Power supplyC、CMOS batteryD、CD-ROM disk

4.A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller.Which of the following is the MOST likely cause of the problem?（）A. Both hard drives have the master jumper in place.B. One hard drive is set as master and the other slave.C. The hard drive data cable is reversed.D. Both hard drives have the cable select jumper in place.

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）A The hard drive is not formatted.B The BIOS is”相关问题

  • 第1题：

    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）

    • A、Both hard drives have the master jumper in place.
    • B、One hard drive is set as master and the other slave.
    • C、The hard drive data cable is reversed.
    • D、Both hard drives have the cable select jumper in place.

    正确答案:A

  • 第2题：

    After hardware upgrades have been installed, the technician boots the computer system. Nodisplay output is observed but a beeping is heard from the computer. Which of the following is the MOST likely issue?（）

    • A、Hard drive cables are not connected.
    • B、BIOS chips are not seated properly.
    • C、The power supply is not functioning.
    • D、Video card is not seated properly.

    正确答案:D

  • 第3题：

    A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）

    • A、The motherboard was damaged and needs replacing.
    • B、The floppy drive was not reconnected.
    • C、A configuration disk was left in the floppy drive.
    • D、The ribbon cable has been installed incorrectly.

    正确答案:D

  • 第4题：

    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

    • A、The power supply has failed.
    • B、The drive cable is connected backwards.
    • C、The floppy drive has failed.
    • D、The proper drivers have not been loaded.

    正确答案:B

  • 第5题：

    An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）

    • A、The system has a fragmented hard drive.
    • B、The drive interface needs to be changed.
    • C、The user has too many documents on the hard drive.
    • D、The system page file has an issue.

    正确答案:A

  • 第6题：

    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）

    • A、The hard drive is not formatted.
    • B、The BIOS is corrupted.
    • C、The motherboard has faulty capacitors.
    • D、The drive cable is backwards

    正确答案:D

  • 第7题：

    单选题
    A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）
    A

    The motherboard was damaged and needs replacing.

    B

    The floppy drive was not reconnected.

    C

    A configuration disk was left in the floppy drive.

    D

    The ribbon cable has been installed incorrectly.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）
    A

    Optical drive

    B

    Power supply

    C

    CMOS battery

    D

    CD-ROM disk


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A user reports that the computer’s hard drive is constantly running and the hard drive light is constantly flashing. Which of the following tools would be used to resolve this issue without losing data?（）
    A

    chkdsk

    B

    fdisk

    C

    defrag

    D

    format


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）
    A

    The second hard drive has not been formatted for NTFS.

    B

    The jumpers on both drives are set to the cable select position.

    C

    The jumper on the first drive is set to master and the second is set to slave.

    D

    The jumpers on both drives are set to the master position.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?（）
    A

    The memory is failing.

    B

    The CPU is overheating.

    C

    The hard drive is not attached properly.

    D

    The operating system is not installed.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A customer reports to Karen, a technician, that he is experiencing problems with the display after his computer is fully booted but reports seeing the BIOS splash screen during boot. Which of the following would MOST likely be the cause?（）
    A

    The video cable is incorrectly attached.

    B

    A corrupted or incorrect video driver is installed.

    C

    An incorrect video card is installed in the computer.

    D

    The video card is defective and needs to be replaced.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A customer reports to Karen, a technician, that he is experiencing problems with the display after his computer is fully booted but reports seeing the BIOS splash screen during boot. Which of the following would MOST likely be the cause?（）

    • A、The video cable is incorrectly attached.
    • B、A corrupted or incorrect video driver is installed.
    • C、An incorrect video card is installed in the computer.
    • D、The video card is defective and needs to be replaced.

    正确答案:B

  • 第14题：

    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

    • A、The second hard drive has not been formatted for NTFS.
    • B、The jumpers on both drives are set to the cable select position.
    • C、The jumper on the first drive is set to master and the second is set to slave.
    • D、The jumpers on both drives are set to the master position.

    正确答案:D

  • 第15题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第16题：

    A newly installed floppy drive activity light stays on. Which of the following is the MOST likely problem?（）

    • A、The computer does not support this type of drive.
    • B、Connector is plugged in backwards.
    • C、Power is plugged in backwards.
    • D、All floppies are corrupt.

    正确答案:B

  • 第17题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第18题：

    单选题
    A newly installed floppy drive activity light stays on. Which of the following is the MOST likely problem?（）
    A

    The computer does not support this type of drive.

    B

    Connector is plugged in backwards.

    C

    Power is plugged in backwards.

    D

    All floppies are corrupt.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）
    A

    The power supply has failed.

    B

    The drive cable is connected backwards.

    C

    The floppy drive has failed.

    D

    The proper drivers have not been loaded.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）
    A

    The system has a fragmented hard drive.

    B

    The drive interface needs to be changed.

    C

    The user has too many documents on the hard drive.

    D

    The system page file has an issue.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）
    A

    The hard drive is not formatted.

    B

    The BIOS is corrupted.

    C

    The motherboard has faulty capacitors.

    D

    The drive cable is backwards


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）
    A

    Both hard drives have the master jumper in place.

    B

    One hard drive is set as master and the other slave.

    C

    The hard drive data cable is reversed.

    D

    Both hard drives have the cable select jumper in place.


    正确答案： C
    解析： 暂无解析

相关内容