A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?()
第1题:
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times, each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures?()
第2题:
A user reports their system is displaying an error message ‘NTLDR is missing’. Which of the following is the MOST likely cause for this error?()
第3题:
A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing?()
第4题:
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?()
第5题:
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?()
第6题:
A user states that whenever they try to launch a certain installed application, they hear unusual whirring/clicking sounds from their machine and the application never loads. Which of the following components would a technician MOST likely need to replace?()
第7题:
QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?()
第8题:
The DVD-ROM drive has failed.
An installation file copied from the DVD to the hard drive is corrupt.
Faulty OS installation DVD
Incorrect boot sequence in the BIOS
第9题:
Optical drive
Power supply
CMOS battery
CD-ROM disk
第10题:
The new drive’s jumper is set for master.
The new drive is connected to the secondary bus as a slave drive.
Both drives’ jumpers are set for cable select.
The old drive’s jumper is set for master and the new drive is set for slave.
第11题:
A dead CMOS battery
The OS is not installed on the hard drive
A faulty RAM
A faulty HDD connection
第12题:
The floppy drive
The hard drive
The CD-ROM drive
The DVD-ROM drive
第13题:
An administrator is attempting to start a server from a bootable Linux disk but instead the serverboots into Windows. Which of the following is the MOST likely reason for this?()
第14题:
A user states they receive a message Boot device not found half of the time they boot their system.Which of the following is the MOST likely cause? ()
第15题:
Which of the following could be used to prevent an attacker from accessing the master boot drive when attaching a hard drive to another system?()
第16题:
A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?()
第17题:
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause?()
第18题:
A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem?()
第19题:
An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However, the system does not boot from this CD. What is the MOST likely cause of this problem?()
第20题:
The system needs to boot to Windows first, prior to booting into Linux.
The OS settings are not set properly for Linux support.
The boot order is set incorrectly in the BIOS.
The Linux disk is not supported in a Windows environment.
第21题:
The backplane has failed and needs to be replaced.
The array must be disbanded and recreated from a backup source to recognize the replacement drive.
There is a conflict with the optical drive on the server.
The server power supply is failing and not providing enough power for all the drives.
第22题:
The BIOS is set with the wrong boot order.
The jumpers have not been set on the hard drive.
The hard drive is not compatible with the system board.
The boot.ini file needs to be modified.
第23题:
The CD is defective.
The CD is not bootable.
The CD-ROM drive is defective.
The Boot Sequence is not set in the BIOS to boot first from the CD