Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）A、QoS must be set to PlatinumB、WMM must be enabledC、QoS must be set to GoldD、TSPEC must be disabledE、Cisco Compatible Extensions mu

题目

Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）

  • A、QoS must be set to Platinum
  • B、WMM must be enabled
  • C、QoS must be set to Gold
  • D、TSPEC must be disabled
  • E、Cisco Compatible Extensions must be disabled
相似考题

1.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

2.A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）A. You must set each end of the trunk line to IEEE 802.1e encapsulation.B. You must set the same VTP management domain name on both switches.C. You must set all ports on the two switches as access ports.D. You must configure one of the switches as a VTP server.E. You must use a rollover cable to connect the two switches.

3.Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?()A. QoS must be set to PlatinumB. WMM must be enabledC. QoS must be set to GoldD. TSPEC must be disabledE. Cisco Compatible Extensions must be disabled

4.A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur?（）A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

更多“Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）A、QoS must be set to PlatinumB、WMM must be enabledC、QoS must be set to GoldD、TSPEC must be disabledE、Cisco Compatible Extensions mu”相关问题

  • 第1题：

    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?()

    A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B. The VTP management domain name of both switches must be set the same.

    C. All ports on both the switches must be set as access ports.

    D. One of the two switches must be configured as a VTP server.

    E. A rollover cable is required to connect the two switches together.

    F. A router must be used to forward VTP traffic between VLANs.


    参考答案：B, D

  • 第2题：

    What must be true about the client before upstream traffic stream metrics can be displayed on the Cisco WLC?（）

    • A、must be Cisco Compatible Extensions version 2
    • B、must be Cisco Compatible Extensions version 3
    • C、must be Cisco Compatible Extensions version 4
    • D、must be associated to a Platinum QoS WLAN
    • E、must be associated to an access point on a Cisco WLC with code version 5.0 or newer

    正确答案:C

  • 第3题：

    Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）

    • A、It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.
    • B、It is optional if the Cisco WLC attached switch operates on a trust DSCP model.
    • C、It must be set if the Cisco WLC attached switch operates on a trust CoS model.
    • D、It sets the EDCF queue used for the radio-transmitted frames.

    正确答案:B,C

  • 第4题：

    What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series Fabric Extender？（）    

    • A、 The interface configured as FEX fabric requires the MTU to be set to jumbo.
    • B、 The service policy must be applied to the system QoS.
    • C、 The device defaults to jumbo frame support； no changes are required.
    • D、 The switchport in the FEX interface must be set to MTU 9216.

    正确答案:B

  • 第5题：

    In a Teleworker deployment with a single IP phone connected to a Cisco 831 router, select the true statement regarding Call Admission Control.（）

    • A、RSVP is a required configuration to support conference calls without voice packet loss. 
    • B、The QoS configuration on the 831 router must always provision sufficient bandwidth for two RTP streams. 
    • C、Call admission control is an issue only when using hardware DSP resources. 
    • D、When using the conference call features on a 7960 IP phone, only one RTP stream is present regardless of how many extensions are on the conference.

    正确答案:D

  • 第6题：

    In order to configure two routers as anycast RPs，which of these requirements，at a minimum， must be satisfied？（）

    • A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.
    • B、The RPs must be within the same IGP domain.
    • C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.
    • D、The two anycast RPs must be IBGP peers.

    正确答案:C

  • 第7题：

    You work as the enterprise exchange administrator at Xxx .The Xxx network consists of a domain named xxx .What actions must you take to use administrative delegation on a series of cmdlets？（）

    • A、You must implement log transactions
    • B、You must set up new management role
    • C、You must implement Mailbox journaling
    • D、You must set up a Role Based Access Control （RBAC） role

    正确答案:B

  • 第8题：

    多选题
    Which two Cisco AutoQoS configuration statements are true？ （）
    A

    the auto discovery qos command is supported on serial interfaces， subinterfaces， and virtual interfaces

    B

    CEF must be enabled before configuring the auto discovery qos command

    C

    the auto discovery qos privilege EXEC command must be configured on a router for several days to collect a sampling of data traffic

    D

    the auto qos trust command relies on NBAR to provide VoIP classification

    E

    the auto qos voip command configures the voip classification on routers and switches


    正确答案： E,C
    解析： 暂无解析

  • 第9题：

    多选题
    Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）
    A

    QoS must be set to Platinum

    B

    WMM must be enabled

    C

    QoS must be set to Gold

    D

    TSPEC must be disabled

    E

    Cisco Compatible Extensions must be disabled


    正确答案： A,E
    解析： 暂无解析

  • 第10题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access port.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第11题：

    单选题
    In a Teleworker deployment with a single IP phone connected to a Cisco 831 router, select the true statement regarding Call Admission Control.（）
    A

    RSVP is a required configuration to support conference calls without voice packet loss. 

    B

    The QoS configuration on the 831 router must always provision sufficient bandwidth for two RTP streams. 

    C

    Call admission control is an issue only when using hardware DSP resources. 

    D

    When using the conference call features on a 7960 IP phone, only one RTP stream is present regardless of how many extensions are on the conference.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    多选题
    Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）
    A

    It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.

    B

    It is optional if the Cisco WLC attached switch operates on a trust DSCP model.

    C

    It must be set if the Cisco WLC attached switch operates on a trust CoS model.

    D

    It sets the EDCF queue used for the radio-transmitted frames.


    正确答案： C,D
    解析： 暂无解析

  • 第13题：

    Which two Cisco AutoQoS configuration statements are true？ （）

    • A、the auto discovery qos command is supported on serial interfaces， subinterfaces， and virtual interfaces
    • B、CEF must be enabled before configuring the auto discovery qos command
    • C、the auto discovery qos privilege EXEC command must be configured on a router for several days to collect a sampling of data traffic
    • D、the auto qos trust command relies on NBAR to provide VoIP classification
    • E、the auto qos voip command configures the voip classification on routers and switches

    正确答案:B,E

  • 第14题：

    The Cisco AutoQoS feature is being used throughout the Company VOIP network.  Which three  statements about this feature are true？（）

    • A、The "mls qos" global configuration command must be entered before configuring AutoQoS.
    • B、CEF must be enabled.
    • C、The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all  configurations generated by Cisco AutoQos.
    • D、CDP must be enabled.
    • E、SNMP must be enabled.

    正确答案:B,C,D

  • 第15题：

    The Cisco CRS Server must be configured to communicate and interoperate with the Cisco CallManager. Which two must be configured on the Cisco CRS Server?（）

    • A、Application Management to load applications  
    • B、JTAPI Subsystem with the JTAPI Call Control Group  
    • C、Database Subsystem communication with LDAP Directory  
    • D、JTAPI Subsystem with the JTAPI provider  

    正确答案:B,D

  • 第16题：

    In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）

    • A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.
    • B、The RPs must be within the same IGP domain.
    • C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.
    • D、The two anycast RPs must be IBGP peers.

    正确答案:C

  • 第17题：

    Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）

    • A、 QoS must be set to Platinum
    • B、 WMM must be enabled
    • C、 QoS must be set to Gold
    • D、 TSPEC must be disabled
    • E、 Cisco Compatible Extensions must be disabled

    正确答案:A,B

  • 第18题：

    Which two statements are correct about database transportation? （）

    • A、The source and target platforms must be the same
    • B、Redo logs, control files and temp files are also transported
    • C、The transported database must have the same database identifier (DBID) as the source database and cannot be changed
    • D、The COMPATIBLE parameter must be set to 10.0.0.0 or higher and the database must be opened in readonly mode before being transported
    • E、Recovery Manager (RMAN) is used to convert the necessary data files of the database if the target platform is different and has different endian format

    正确答案:D,E

  • 第19题：

    多选题
    Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）
    A

    QoS must be set to Platinum

    B

    WMM must be enabled

    C

    QoS must be set to Gold

    D

    TSPEC must be disabled

    E

    Cisco Compatible Extensions must be disabled


    正确答案： D,A
    解析： 暂无解析

  • 第20题：

    单选题
    In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）
    A

    Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.

    B

    The RPs must be within the same IGP domain.

    C

    Multicast Source Discovery Protocol must be configured between the two anycast RPs.

    D

    The two anycast RPs must be IBGP peers.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    Which two statements are correct about database transportation?（） (Choose two.)
    A

    The source and target platforms must be the same

    B

    Redo logs, control files and temp files are also transported

    C

    The transported database must have the same database identifier (DBID) as the source database and cannot be changed

    D

    The COMPATIBLE parameter must be set to 10.0.0.0 or higher and the database must be opened in readonly mode before being transported

    E

    Recovery Manager (RMAN) is used to convert the necessary data files of the database if the target platform is different and has different endian format


    正确答案： A,D
    解析： 暂无解析

  • 第22题：

    单选题
    What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series Fabric Extender？（）
    A

     The interface configured as FEX fabric requires the MTU to be set to jumbo.

    B

     The service policy must be applied to the system QoS.

    C

     The device defaults to jumbo frame support； no changes are required.

    D

     The switchport in the FEX interface must be set to MTU 9216.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    多选题
    The Cisco CRS Server must be configured to communicate and interoperate with the Cisco CallManager. Which two must be configured on the Cisco CRS Server?（）
    A

    Application Management to load applications

    B

    JTAPI Subsystem with the JTAPI Call Control Group

    C

    Database Subsystem communication with LDAP Directory

    D

    JTAPI Subsystem with the JTAPI provider


    正确答案： D,B
    解析： 暂无解析

相关内容