Router R1 sets a route tag for subnet 10.1.1.0／24 when redistributing from OSPF into EIGRP.Which of the following unit is assigned to the route tag?()A. Kilobits/seconDB. Tens of microsecondsC. CostD. Hop countE. No unit is assigneD

题目
Router R1 sets a route tag for subnet 10.1.1.0／24 when redistributing from OSPF into EIGRP.Which of the following unit is assigned to the route tag?()

A. Kilobits/seconD

B. Tens of microseconds

C. Cost

D. Hop count

E. No unit is assigneD

相似考题

1.The following output occurs on Router R1. Which of the following cannot be determine d from this output?（）R1 show ip route 180.1.1.0 255.255.255.240Routing entry for 180.1.1.0/28Known via "bgp 2", distance 20, metric 0Tag 3, type externalLast update from 192.168.1.2 00:10:27 agoRouting Descriptor Blocks:* 192.168.1.2, from 19 2.168.1.2, 00:10:27 agoRoute metric is 0, traffic share count is 1AS Hops 2Route tag 3A. The type of BGP peer (iBGP or eBGP) that advertised this route to R1B. R1‘s ASNC. The next - hop router‘s ASND. The AS_Path length

2.Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?（）route - map fred deny 10match ip address oneroute - map fred deny 20match ip address tworoute - map fred permit 100A. The third route map clause will allow any routes not already filtered by the first two clausesB. R outes permitted by ACL "two" will be redistributedC. Routes denied by ACL "one" will be redistributedD. All routes will be filtereD

3.Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）A. Subnet numberB. Next - hop router IP address of the routeC. Whether the route is an E1 or E2 routeD. The ro ute‘s tagE. The number of router hops between the router and the subnet

4.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

更多“Router R1 sets a route tag for subnet 10.1.1.0／24 when redistributing from OSPF into EIGRP.Which of the following unit is assigned to the route tag?() ”相关问题

  • 第1题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）

    A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

    B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

    C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

    D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.


    参考答案：B

  • 第2题：

    The following output occurs on Router R1. Which of the following cannot be determine d from this output?（） R1# show ip route 180.1.1.0 255.255.255.240 Routing entry for 180.1.1.0/28 Known via "bgp 2", distance 20, metric 0 Tag 3, type external Last update from 192.168.1.2 00:10:27 ago Routing Descriptor Blocks: * 192.168.1.2, from 19 2.168.1.2, 00:10:27 ago Route metric is 0, traffic share count is 1 AS Hops 2 Route tag 3

    • A、The type of BGP peer (iBGP or eBGP) that advertised this route to R1
    • B、R1's ASN
    • C、The next - hop router's ASN
    • D、The AS_Path length

    正确答案:C

  • 第3题：

    Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）

    • A、Subnet number
    • B、Next - hop router IP address of the route
    • C、Whether the route is an E1 or E2 route
    • D、The ro ute's tag
    • E、The number of router hops between the router and the subnet

    正确答案:E

  • 第4题：

    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）

    • A、R1 will always create and flood a default route into the OSPF domain.
    • B、R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.
    • C、R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.
    • D、R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.

    正确答案:B

  • 第5题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第6题：

    Router R1 sits inside OSPF area 1. Router R2 redistributes an E1 route into OSPF for prefix 2.2.2.0/24, with external metric 20. Router R22 redistributes an E2 route for the same prefix/length, external metric 10. Under what conditions will R1 choose as it s best route the route through R22?（）

    • A、R1 will always choose the route through R22.
    • B、As long as R1's best internal OSPF cost to reach R22 is less than 10.
    • C、As long as R1's best internal OSPF cost to reach R22 is less than 20.
    • D、R1 will never choo se the route through R22 if the E1 route through R2 is available.

    正确答案:D

  • 第7题：

    单选题
    Router R1 sits inside OSPF area 1. Router R2 redistributes an E1 route into OSPF for prefix 2.2.2.0/24, with external metric 20. Router R22 redistributes an E2 route for the same prefix/length, external metric 10. Under what conditions will R1 choose as it s best route the route through R22?（）
    A

    R1 will always choose the route through R22.

    B

    As long as R1's best internal OSPF cost to reach R22 is less than 10.

    C

    As long as R1's best internal OSPF cost to reach R22 is less than 20.

    D

    R1 will never choo se the route through R22 if the E1 route through R2 is available.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    Router R1 sets a route tag for subnet 10.1.1.0/24 when redistributing from  OSPF into EIGRP.Which of the following unit is assigned to the route tag?（）
    A

    Kilobits/seconD

    B

    Tens of microseconds

    C

    Cost

    D

    Hop count

    E

    No unit is assigneD


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（） router ospf 1 redistribute ospf 2 external 2 route - map fred ! route - map fred permit 10 match ip address 1 set metric - type type - 1
    A

    No routes are redistributed because a route cannot be both E1 and E2.

    B

    Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.

    C

    Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.

    D

    Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32
    A

    R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1

    B

    R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1

    C

    R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE

    D

    R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)
    A

    R1 is the router that redistributed the route

    B

    R1's metric to reach subnet 10.2.2.0/24 is 64

    C

    The route was redistributed on a router that has a router ospf 1 command configured

    D

    R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）
    A

    R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

    B

    For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

    C

    For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

    D

    No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第14题：

    R1 is internal to area 1, and R2 is internal to area 2. Subnet 10.1.1.0/24 exists in area 2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2. Which of the following LSAs must R1 use when calculating R1's best route for 10.1.1.0/24?（）

    • A、R2's Type 1 LSA
    • B、Subnet 10.1.1.0/24's Type 2 LSA
    • C、ABR1's Type 1 LSA in area 0
    • D、Subnet 10.1.1.0/24's Type 3 LSA in Area 0
    • E、  Subnet 10.1.1.0/24's Type 3 LSA in Area 1

    正确答案:E

  • 第15题：

    Which command will configure a default route on a router?（）

    • A、router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
    • B、router(config)# ip default-route 10.1.1.0
    • C、router(config)# ip default-gateway 10.1.1.0
    • D、router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1

    正确答案:D

  • 第16题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    • A、Router R2 will not form a neighbor relationship with R1.
    • B、Router R2 will obtain a full routing table, including a default route, from R1.
    • C、R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
    • D、R2 will not have a route for the directly connected serial network, but all other directly connected

    正确答案:B

  • 第17题：

    The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32

    • A、R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1
    • B、R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1
    • C、R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE
    • D、R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE

    正确答案:C

  • 第18题：

    Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?（） route - map fred deny 10 match ip address one route - map fred deny 20 match ip address two route - map fred permit 100

    • A、The third route map clause will allow any routes not already filtered by the first two clauses
    • B、R outes permitted by ACL "two" will be redistributed
    • C、Routes denied by ACL "one" will be redistributed
    • D、All routes will be filtereD

    正确答案:A

  • 第19题：

    单选题
    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）
    A

    R1 will always create and flood a default route into the OSPF domain.

    B

    R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.

    C

    R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.

    D

    R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    The following output occurs on Router R1. Which of the following cannot be determine d from this output?（） R1# show ip route 180.1.1.0 255.255.255.240 Routing entry for 180.1.1.0/28 Known via "bgp 2", distance 20, metric 0 Tag 3, type external Last update from 192.168.1.2 00:10:27 ago Routing Descriptor Blocks: * 192.168.1.2, from 19 2.168.1.2, 00:10:27 ago Route metric is 0, traffic share count is 1 AS Hops 2 Route tag 3
    A

    The type of BGP peer (iBGP or eBGP) that advertised this route to R1

    B

    R1's ASN

    C

    The next - hop router's ASN

    D

    The AS_Path length


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    R1 is internal to area 1, and R2 is internal to area 2. Subnet 10.1.1.0/24 exists in area 2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2. Which of the following LSAs must R1 use when calculating R1's best route for 10.1.1.0/24?（）
    A

    R2's Type 1 LSA

    B

    Subnet 10.1.1.0/24's Type 2 LSA

    C

    ABR1's Type 1 LSA in area 0

    D

    Subnet 10.1.1.0/24's Type 3 LSA in Area 0

    E

      Subnet 10.1.1.0/24's Type 3 LSA in Area 1


    正确答案： E
    解析： 暂无解析

  • 第22题：

    多选题
    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
    A

    show ip route

    B

    show ip eigrp topology

    C

    show ip ospf topology

    D

    show ip eigrp topology 10.1.1.0/24


    正确答案： D,C
    解析： 暂无解析

  • 第23题：

    单选题
    Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
    A

    Subnet number

    B

    Next - hop router IP address of the route

    C

    Whether the route is an E1 or E2 route

    D

    The ro ute's tag

    E

    The number of router hops between the router and the subnet


    正确答案： A
    解析： 暂无解析

相关内容