Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answer

题目

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）

A. Subnet number

B. Next - hop router IP address of the route

C. Whether the route is an E1 or E2 route

D. The ro ute‘s tag

E. The number of router hops between the router and the subnet

相似考题

1.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

2.Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

3.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

4.Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?（）route - map fred deny 10match ip address oneroute - map fred deny 20match ip address tworoute - map fred permit 100A. The third route map clause will allow any routes not already filtered by the first two clausesB. R outes permitted by ACL "two" will be redistributedC. Routes denied by ACL "one" will be redistributedD. All routes will be filtereD

参考答案和解析
参考答案：E
更多“Router R1 has been configured with the redistribute ospf 1 route － map fred command under ”相关问题

  • 第1题：

    Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）

    A. The no auto - summary command needs to be added under router eigrp 1

    B. The subnets keyword was not included in the redistribute command under router ospf 1

    C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

    D. The default - information originate command needs to be added under router ospf 1

    E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF


    参考答案：B

  • 第2题：

    Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

    A. The redistribution command should be reentered with the match route - type parameter included.

    B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

    C. The redistribution command should be reentered with the metric metric - value parameter included.

    D. Routes will first need to be distributed into another protocol, and then into RIP.


    参考答案：C

  • 第3题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第4题：

    Which of the following is a valid method for defining a seed metric？（Choose all that apply.）（）

    • A、The default-metric command configured under the appropriate interface
    • B、The metric parameter in the network command of a routing process
    • C、The metric parameter in the redistribute command
    • D、The default-metric command
    • E、A route-map containing a seed command
    • F、A route map containing a metric command

    正确答案:C,D,F

  • 第5题：

    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）

    • A、R1 will always create and flood a default route into the OSPF domain.
    • B、R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.
    • C、R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.
    • D、R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.

    正确答案:B

  • 第6题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第7题：

    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）

    • A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessary
    • B、The router must hav e at least one working link connected to each routing domain
    • C、The redistribute command must be configured under EIGRP to send the routes to OSPF
    • D、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

    正确答案:B,D

  • 第8题：

    多选题
    Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?（）
    A

    Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.

    B

    Redistribute the statically configured defa ult route.

    C

    Disable auto - summary.

    D

    Configure the network 0.0.0.0 command.

    E

    Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.


    正确答案： B,A
    解析： 暂无解析

  • 第9题：

    多选题
    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）
    A

    The router must have one routing protocol configured, but configuration for both routing protocols is not necessary

    B

    The router must hav e at least one working link connected to each routing domain

    C

    The redistribute command must be configured under EIGRP to send the routes to OSPF

    D

    The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF


    正确答案： D,A
    解析： 暂无解析

  • 第10题：

    多选题
    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
    A

    show ip route

    B

    show ip eigrp topology

    C

    show ip ospf topology

    D

    show ip eigrp topology 10.1.1.0/24


    正确答案： D,C
    解析： 暂无解析

  • 第11题：

    单选题
    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）
    A

    R1 has been configured with an ip default- network 2.0.0.0 command.

    B

    R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.

    C

    R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    D

    Another router has been configured with an ip default - network 2.0.0.0 command.

    E

    Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）
    A

    R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

    B

    For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

    C

    For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

    D

    No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. A new TAC engineer comes to you for advice. The engineer wants to configure RIPv2 - OSPF two - way redistribution while avoiding routing loops. Which two additio ns to the router B1 configuration should the engineer make?（）

    A. access - list 40 deny 172.16.1.0 0.0.0.255 access - list 40 permit any router rip redistribute ospf 100 metric 5 distribute- list 40 out ospf 100

    B. ip prefix - list rip_routes permit 172. 16.1.16/25 ge 26 le 28 route - map redis - ospf deny 10 match ip address prefix- list rip_routes router rip redistribute ospf 10 route - map redis - ospf subnets

    C. ip prefix - list rip - to - ospf permit 10.1.1.8/25 ge 26 le 28 route - map redis - rip deny 20 match i p address prefix - list rip - to - ospf router ospf 100 redistribute rip route - map redis - rip subnets

    D. access - list 15 deny 10.1.1.0 0.0.0.63 access - list 15 permit any route - map redis - rip deny 10 match ip address 15 route - map redis - rip permit 20 router os pf 100 redistribute rip route - map redis - rip subnets


    参考答案：A, D

  • 第14题：

    Based on the exhibited output, which three statements are true?()

    A. The route to 10.2.0.0/16 was redistributed into EIGRP.

    B. A default route has been redistributed into the EIGRP autonomous system.

    C. R1 is configured with the ip summary - address command.

    D. R1 is sourcing a n external EIGRP route from Null0.

    E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.

    F. R1 is configured with the variance command.


    参考答案：B, C, F

  • 第15题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第16题：

    Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）

    • A、Subnet number
    • B、Next - hop router IP address of the route
    • C、Whether the route is an E1 or E2 route
    • D、The ro ute's tag
    • E、The number of router hops between the router and the subnet

    正确答案:E

  • 第17题：

    Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?（）

    • A、Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.
    • B、Redistribute the statically configured defa ult route.
    • C、Disable auto - summary.
    • D、Configure the network 0.0.0.0 command.
    • E、Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.

    正确答案:C,E

  • 第18题：

    Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?（） route - map fred deny 10 match ip address one route - map fred deny 20 match ip address two route - map fred permit 100

    • A、The third route map clause will allow any routes not already filtered by the first two clauses
    • B、R outes permitted by ACL "two" will be redistributed
    • C、Routes denied by ACL "one" will be redistributed
    • D、All routes will be filtereD

    正确答案:A

  • 第19题：

    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）

    • A、R1 has been configured with an ip default- network 2.0.0.0 command.
    • B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
    • C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
    • D、Another router has been configured with an ip default - network 2.0.0.0 command.
    • E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    正确答案:D

  • 第20题：

    单选题
    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）
    A

    R1 will always create and flood a default route into the OSPF domain.

    B

    R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.

    C

    R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.

    D

    R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（） router ospf 1 redistribute ospf 2 external 2 route - map fred ! route - map fred permit 10 match ip address 1 set metric - type type - 1
    A

    No routes are redistributed because a route cannot be both E1 and E2.

    B

    Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.

    C

    Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.

    D

    Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    多选题
    Which of the following is a valid method for defining a seed metric？（Choose all that apply.）（）
    A

    The default-metric command configured under the appropriate interface

    B

    The metric parameter in the network command of a routing process

    C

    The metric parameter in the redistribute command

    D

    The default-metric command

    E

    A route-map containing a seed command

    F

    A route map containing a metric command


    正确答案： F,E
    解析： 暂无解析

  • 第23题：

    单选题
    Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
    A

    Subnet number

    B

    Next - hop router IP address of the route

    C

    Whether the route is an E1 or E2 route

    D

    The ro ute's tag

    E

    The number of router hops between the router and the subnet


    正确答案： A
    解析： 暂无解析

相关内容