You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the tex

题目

You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates you're your computer is infected with a Master Boot Record virus.

What should you do before you continue the installation?

A．Remove the virus checker in Windows 98.

B．Disable the BIOS virus checker and restart the computer.

C．Run Fixmbr.Exe from the Windows 2000 Professional CD-ROM.

D．Modify the Boot.ini file to include a signature parameter on the ARC path of the system partition.

相似考题

1.You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A．Use Windows 2000 Professional to configure drive D as a dynamic volume.B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D．Reinstall Windows NT workstation after configuring the disk code task.

2.You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.You want to upgrade your computer to Windows 2000 Professional.What should you do?A．Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.B．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.C．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.D．Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

3.You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade computer1. During the upgrade of computer2, a series of power outages interrupts the upgrade.You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.What should you do?A．On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys, Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM.B．From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys, Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart the upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.C．On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.D．On computer1, perform. a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager.

4.You are the desktop administrator for Ezonexam.com'ssalesdepartment. Ezonexam.com's network contains a RIS server.You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.You start the computer by using a RIS bootable floppy disk, and you receive the same result.What should you do?A．Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.B．Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.C．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.D．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.E．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

更多“You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the tex”相关问题

  • 第1题：

    Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.

    The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.

    What should you do?

    A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.

    B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

    C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.

    D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.

    E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.


    正确答案：D
    解析：Explanation: To install Windows 2000 Server on computers from source files that are located on a centralized network share we would have to connect to the network share from the the computers. If the computers do not have PXE-compliant network cards we would have to make a network boot disk that the computers can use connect to the network share. We would start the installation process by using winnt with /s /u /udf switches. We must use winnt and not winnt32 as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.

    Incorrect answers:
    A: Makebt32 is used to create a set of four setup floppy disks.

    B: The boot diskette must include network drivers.

    C: Dsclient.exe is a directory service client for Windows 9x. It cannot be used to start an installation of Windows 2000.

    E: The installation process cannot be started by using a Windows 2000 emergency repair disk.

  • 第2题：

    You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.

    You want to install Windows 2000 Server from source files that are located on a server on the network.

    What should you do?

    A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.

    B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.

    C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.

    D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.


    正确答案：B
    解析：Explanation: To install Windows 2000 Server on a computer from source files that are located in a centralized network location we would have to create a network boot disk that includes DOS drivers for the network adapter. We would have to start the computer using this boot disk and connect to the network share where the source files are located. Finally we would start installation process by using winnt.exe. We must use winnt.exe and not winnt32.exe as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.exe.

    Incorrect answers:
    A: We must use winnt.exe and not winnt32.exe as the boot disks operate in DOS mode, which works with 16-bit applications. We would thus not be able to use 32-bit applications like winnt32.exe.

    C: Makebt32.exe is used to make Windows 2000 setup floppy disks. These cannot be used to connect to a network share.

    D: The boot disk must include drivers for the network adapter.

  • 第3题：

    You want to upgrade your MS Windows 98 computer to Windows 2000 professional. Before the actual installation， you want to know whether your system’s hardware or software is compatible with Windows 2000 professional or not.   What you will do. （）

    • A、Consult the HCL.
    • B、See the online documentation of Windows 2000 professional. 
    • C、Run WINNT32/CHECKUPGRADEONLY.
    • D、Consult the technical support team of Windows 2000.

    正确答案:C

  • 第4题：

    You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

    • A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
    • B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
    • C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
    • D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

    正确答案:A

  • 第5题：

    You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）

    • A、 Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 
    • D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 
    • E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 

    正确答案:D

  • 第6题：

    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic volume
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
    • D、Reinstall Windows NT workstation after configuring the disk code task

    正确答案:C

  • 第7题：

    ou need additional storage space on your Windows 2000 Professional computer. You install a second SCSI controller and a second hard disk.  During the installation of the SCSI driver, you receive a warning that the driver is unsigned. You complete the installation of the driver and restart Windows 2000 Professional. During startup, you receive a Stop error.  You need to correct the error and start Windows 2000 as quickly as possible. What should you do?（）

    • A、Start the computer in Recovery Console. Delete the SCSI controller driver.
    • B、Start the computer by using the last known good configuration.
    • C、Start the computer by using the Windows 2000 startup floppy disks， and repair the system files.
    • D、Start the computer by using the Windows 2000 startup floppy disks， and repair the registry.

    正确答案:B

  • 第8题：

    You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade.  You discover that upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.  What should you do? （）

    • A、On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM. 
    • B、From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM. 
    • C、On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.  
    • D、On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager. 

    正确答案:C

  • 第9题：

    You are the administrator of your company's network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.   You want to accomplish the following goals:   • An unattended installation of Windows 2000 Professional will be performed.  • An unattended installation of company's standard applications will be performed during the     installation of Windows 2000 Professional.  • Each computer will be assigned a unique security identifier description.  • The unattended installation script will be modified so that the computers automatically join the    contoso.com domain.   You take the following actions:  • Install Windows 2000 Professional on a Windows 98 computer named computer1. • Install and configure computer standard applications on computer1.  • Use Setup Manager on computer1 to create an unattended.txt file based on the current    configuration including domain membership.  • Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use    the unattended.txt file to provide the setting for the installation.   Which result or results do these actions produce?（）

    • A、 An unattended installation of Windows 2000 Professional will be performed.
    • B、 An unattended installation of company’s standard applications will be performed during the   Installation of Windows 2000 Professional.
    • C、 Each computer will be assigned a unique security identifier description.
    • D、 The unattended installation script will be modified so that the computers automatically join the  contoso.com domain.

    正确答案:A,C

  • 第10题：

    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

    • A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
    • B、Use Windows 2000 Professional to configure drive C as a dynamic partition
    • C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
    • D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

    正确答案:D

  • 第11题：

    单选题
    You are the administrator of Red Lington Enterprises. You want to upgrade 125 computers from Windows NT Workstation 4.0 to Windows 2000 Professional. You create an unattend.txt file by using the setup manager.  You copy the file to a floppy disk. You then start the installation on a computer in the test lab using the Windows 2000 Professional CD-ROM.  After the computer starts you insert the floppy disk. Even though you set the user interaction level to full-unattended mode you are prompted for all the configuration parameters. You want to ensure that the unattended installation does not prompt you for input.  What should you do？ （）
    A

    Add a [data] section to unattend.txt， and set the unattended install Parameter to YES.

    B

    Add an [Unattended] section to unattend.txt， and set the OemPreinstall parameter to Yes.

    C

    Rename unattend.txt on the floppy disk to winnt.sif

    D

    Create a /$oem$/$1 folder on the hard disk of the test computer， and copy unattend.txt to thefolder.


    正确答案： D
    解析： When booting the computer from the CD-ROM, and then using an answer file from a floppy disk, the answer file must be named Winnt.sif

  • 第12题：

    单选题
    You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade.  You discover that upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.  What should you do? （）
    A

    On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM. 

    B

    From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM. 

    C

    On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.  

    D

    On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager. 


    正确答案： C
    解析： You can create the four setup boot disks by using either makeboot.exe or makebt32.exe. Both are located in the /Bootdisk directory on the Windows 2000 installation CD. These disks can be used to restart the installation process on computer2.

  • 第13题：

    Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.

    When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".

    What should you do?

    A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.

    B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.

    C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.

    D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.


    正确答案：A
    解析：Explanation:Theproblemposedinthisscenariocouldarisefromanumberofcauses.ItcouldbethattheNTLDRismissing,orthebootsectoriscorrupt,orthediskisphysicallydamaged.IfweassumethattheproblemcausedbyamissingNTLDR,wecoulduseeithertheEmergencyRepairDisk(ERD)ortheRecoveryConsoletocorrectheproblem.UsingeithertheEmergencyRepairDiskortheRecoveryConsolewewouldattempttocopytheNTLDRfilefromtheWindows2000installationCD-ROMtotherootofthesystempartition,whichcouldsolvethebootproblem.Incorrectanswers:B:Debuggingmodeisaspecialsafemodeoptionthatusedbydeveloperstodebugprograms.ItcannotbeusedrestoretheNTLDR.C:Windows2000doesnotsupportabootablefloppydisk,althoughthefourWindows2000setupdiskscouldbeusedtostartthecomputerinWindows2000.TheRecoveryConsoleortheERDprocessmustbeusedtorestoretheNTLDR.D:TheFileSignatureVerificationutilityisusetotesttheintegrityofdevicedrivers.ItcannotbeusedrestoretheNTLDR.

  • 第14题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

    Each computer has an 8 GB hard disk.

    You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

    In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

    You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

    What should you do?

    A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

    B．Use Windows 2000 Professional to enable encrypting file system on drive D.

    C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

    D．Reinstall Windows NT Workstation after configuring disk quotas.


    正确答案：C
    解析：Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

    Incorrect answers:
    A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

    B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

    D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

  • 第15题：

    You plan to upgrade a computer that runs Windows 2000 to Windows XP Professional. You need to verify that the applications currently installed on the computer will run after the upgrade. What should you do before you start the Windows XP Professional installation?（）

    • A、From the Windows XP Professional source files, run winnt.exe /u. 
    • B、From the Windows XP Professional source files, run Winnt32 /checkupgradeonly.
    • C、Review the Windows Hardware Compatibility List on the Microsoft Web site. 
    • D、Start the computer from the Windows XP Professional installation CD. When prompted, press F6.

    正确答案:B

  • 第16题：

    You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）

    • A、Use the listsvc command to disable the Zip device driver
    • B、Select Recovery Console from the Recovery Menu.
    • C、Use the disable command to disable the Zip device driver
    • D、Select the Debug mode from the Windows 2000 Advanced Options menu
    • E、Insert the Emergency Repair Disk and specify the path of the recovery file on the hard disk
    • F、Start the computer using the Windows 2000 Professional CD-ROM.

    正确答案:B,C,F

  • 第17题：

    Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）

    • A、Start the computer in safe mode and reformat the hard disk.
    • B、Start the computer in the debug mode and reformat the hard disk.
    • C、Start the computer using the ERD and repair the Master Boot Record.
    • D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.

    正确答案:D

  • 第18题：

    You are a helpdesk technician at Company's main office. You have been assigned the task to upgrade all 350 client computers from Windows 98 to Windows 2000 professional. All client computers in your office are configured with identical hardware. However, several different peripheral devices are used throughout the company. Users are not allowed to manage their workstations. Many of the users have installed software, changed video settings and compressed their hard drives using DriveSpace on their Windows 98 computer. You create a Setup.txt file by using Setup Manager. You run Winn32 /Unattend:Setup.txt on one of the Windows 98 computers. The installation fails with an error message. You want to upgrade the Windows 98 computer to Windows 2000 Professional.  What should you do? （）

    • A、Rename Setup.txt to unattend.txt. Run Winnt32 /Unattend：Unattend.txt.
    • B、Connect the Windows 98 computer to the Internet. Rerun Winnt32 /Unattend：Setup.txt
    • C、Uncompress the hard disk on the Windows 98 computers to disable DriveSpace. Rerun Winnt32 /Unattend：Setup.txt.
    • D、Create a bootable floppy disk that contains and automatically runs Winnt32 /CheckUpgradeOnly. Boot the Windows 98 computer with the floppy disk.

    正确答案:C

  • 第19题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable encrypting file system on drive D
    • C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
    • D、Reinstall Windows NT Workstation after configuring disk quotas

    正确答案:C

  • 第20题：

    You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a Pentium III - 400 MHz, has 128 MB of RAM and a 10-GB hard disk.  You are performing the installation using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates that your computer is infected with a master boot record virus.  What should you do before you continue with the installation? （）

    • A、 Remove the virus checker in Windows 98. 
    • B、 Disable the ‘BIOS virus checker’ and restart the computer. 
    • C、 Run Fixmbr.Exe from the Windows 20000 Professional CD-ROM. 
    • D、 Modify the Boot.ini to include a signature parameter on the ARC path of the system partition. 

    正确答案:B

  • 第21题：

    You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（） 

    • A、From the Windows XP Professional computer, run diskcopy.exe /v a:.
    • B、From a computer that runs Windows 98, create a MS-DOS-based startup disk. 
    • C、From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk. 
    • D、From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk. 

    正确答案:D

  • 第22题：

    You are the desktop administrator for your company. You need to upgrade a Windows 98 computer to Windows XP Professional. Windows 98 is installed in a folder named C:/Win98.  You need to ensure that the computer's applications and settings are retained after the upgrade. You insert the Windows XP Professional CD-ROM into the computer and restart the computer. The text-based portion of Setup appears. The text on the screen states that Windows XP Professional will be installed in a folder named C:/Windows, not in the C:/Win98 folder.  You need to ensure that Windows XP Professional upgrades the existing Windows 98 installation. What should you do?（）

    • A、Rename the C:/Win98 folder to C:/Windows. 
    • B、Modify the installation settings in the text-based portion of Setup so that Windows XP Professional is installed in the C:/Win98 folder. 
    • C、Restart the computer by using Windows 98. Then insert the Windows XP Professional CD-ROM into the computer and run Setup from the CD-ROM. 
    • D、Use the Windows XP Professional CD-ROM to create a set of Setup floppy disks. Restart the computer by using the first floppy disk in the set to launch Setup.

    正确答案:C

  • 第23题：

    单选题
    You plan to upgrade a computer that runs Windows 2000 to Windows XP Professional. You need to verify that the applications currently installed on the computer will run after the upgrade. What should you do before you start the Windows XP Professional installation?（）
    A

    From the Windows XP Professional source files, run winnt.exe /u. 

    B

    From the Windows XP Professional source files, run Winnt32 /checkupgradeonly.

    C

    Review the Windows Hardware Compatibility List on the Microsoft Web site. 

    D

    Start the computer from the Windows XP Professional installation CD. When prompted, press F6.


    正确答案： B
    解析： 暂无解析

相关内容