You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not inc

第1题：

第2题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）

• A、Start the computer in Safe Mode. Enable driver signing.
• B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.
• C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
• D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

第3题：

You are the network administrator for Company.com.  Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.   You want to upgrade your computer to Windows 2000 Professional. What should you do?（）

• A、 Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter.     Start the installation from the Windows 2000 Professional CD-ROM.     Add the new adapter card drivers when you are prompted. 
• B、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Copy the drivers to C:/Winnt folder.      Start the installation from the Windows 2000 Professional CD-ROM. 
• C、 Obtain Windows 2000 drivers from the SCSI adapter manufacturer.     Start the installation by using the Windows 2000 Professional CD-ROM-     Add the new adapter card drivers when you are prompted. 
• D、 Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive.      Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on      the Windows 2000 Professional CD-ROM.

第4题：

You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0.  Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?（） 

• A、Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.
• B、Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.
• C、Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c：/bootsect.dos command.
• D、Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console， run the Bootcfg /rebuild command.

第5题：

You are the network administrator for ExamSheet.net.  You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）

• A、Restart the computer in the docking station.
• B、Run the Add/Remove Hardware wizard.
• C、Use Device Manager to scan for hardware changes.
• D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.
• E、Install the new network adapter driver.

第6题：

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

• A、Use Windows 2000 Professional to configure drive D as a dynamic volume
• B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
• C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
• D、Reinstall Windows NT workstation after configuring the disk code task

第7题：

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

• A、Use Windows 2000 Professional to configure drive D as a dynamic partition
• B、Use Windows 2000 Professional to enable encrypting file system on drive D
• C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
• D、Reinstall Windows NT Workstation after configuring disk quotas

第8题：

You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade the computer1. During the upgrade of computer2, a series of power outrages interrupts the upgrade.  You discover that upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.  What should you do? （）

• A、On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys,Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM. 
• B、From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys,Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart and upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM. 
• C、On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.  
• D、On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager. 

第9题：

You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

• A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
• B、Use Windows 2000 Professional to configure drive C as a dynamic partition
• C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
• D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

第10题：

You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? （）

• A、 Run Check Disk in Windows NT Workstation 4.0.
• B、 Disable disk compression in Windows NT Workstation 4.0.
• C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.
• D、 Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.

第11题：

第12题：

第13题：

第14题：

You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office.  You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process.  You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter.   What should you do? （）

• A、Restart the Add/Remover Hardware wizard.  Manually add the SCSI adapter drivers.
• B、Restart the computer in safe mode.  Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
• C、Configure Windows 2000 Professional to use driver signing.  Restart the Add/Remove Hardware wizard to detect the SCSI adapter.
• D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder.  Restart the Add/Remover Hardware wizard to detect the SCSI adapter.

第15题：

You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）

• A、Set the driver signing option to block.
• B、Set the driver signing option to ignore.
• C、In the computer’s BIOS， reserve an unused IRQ for ISA devices.
• D、In the Device Manager， configure the second ISA network adapter to use an unused IRQ.

第16题：

You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）

• A、When away from the office use Device Manager to remove the adapter. 
• B、When away from the office configure the startup properties for the adapter to be automatic. 
• C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
• D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.

第17题：

You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）

• A、Format the dynamic volume as a FAT32 partition.
• B、Format the dynamic volume as a FAT16 partition.
• C、Configure Disk 2 to use Encrypting File System （EFS）.
• D、Configure Disk 2 as a basic volume and format the volume as NTFS.
• E、Configure Disk 2 as a basic volume and format the volume as FAT32.

第18题：

You are the administrator of a small network supporting Windows NT 4.0 computers. You configure a setup script to automatically upgrade Windows NT Workstation 4.0 computers to Windows 2000 Professional. When you attempt to test the process on a single computer， you receive this error message：  "The specified Setup script file （path：/unattend.txt） is inaccessible or invalid.  Contact your system administrator."    Which action will most likely resolve this error？ （）

• A、Add the UnattendedInstall="Yes" parameter to the [Unattended] section of your Unattend.txt file
• B、Add the UnattendMode=FullUnattended parameter to the [Data] section of your Unattend.txt file
• C、Add the UnattendedInstall="Yes" parameter to the [GuiUnattended] section   of your Unattend.txt file
• D、Add the UnattendMode=FullUnattended parameter to the [Unattended] section of your Unattend.txt file

第19题：

You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）

• A、Create the boot drive on drive C and format as a FAT16 partition. 
• B、Create the boot drive on drive C and format as a NTFS partition.
• C、Configure the boot drive as a basic volume and format the volume as FAT32.
• D、Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 
• E、Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.

第20题：

You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer.  You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices.   Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again.   You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）

• A、Start the computer in safe mode.  Enable driver signing.
• B、Start the computer in safe mode.  Use Device Manager to remove the SCSI tape device.
• C、Start the computer by using the Recovery Console.  Repair the Master Boot Record by using the fixmbr command.
• D、Start the computer by using the Recovery Console.  Disable the SCSI adapter device driver by using the disable command.

第21题：

You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

• A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
• B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
• C、Configure Disk 2 to use Encrypting File System （EFS）.
• D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

第22题：

You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully.  Which two methods can you use to resolve the problem?（）

• A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by     using the Emergency Repair Disk for the computer.
• B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback     driver from the Windows 2000 Professional CD-ROM.
• C、Restart the computer by using the last know good configuration.
• D、Restart the computer in safe mode and reinstall the original network adapter driver. 
• E、Restart the computer and disable Plug and Play in the computer BIOS.

第23题：