The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?A．It designates VLAN 998 as the default for all unknown tagged trafficB．It designates VLAN 998 for untagg

题目

The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?

A．It designates VLAN 998 as the default for all unknown tagged traffic

B．It designates VLAN 998 for untagged traffic

C．It blocks VLAN 998 traffic from passing on the trunk

D．It creates a VLAN 998 interface

E．None of the above

相似考题

1.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

2.A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.

3.What is the function of the command switchport trunk native vlan 999 on a switch?()A. It designates VLAN 999 for untagged traffic.B. It blocks VLAN 999 traffic from passing on the trunk.C. It creates a VLAN 999 interface.D. It designates VLAN 999 as the default for all unkown tagged traffic.

4.When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?()A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.

更多“The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?A．It designates VLAN 998 as the default for all unknown tagged trafficB．It designates VLAN 998 for untagg”相关问题

  • 第1题：

    An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?（）

    A. Switch(config-if)# switchport access vlan 50

    B. Switch(vlan)# vtp server

    C. Switch(config)# config-revision 20

    D. Switch(config)# vlan 50 name Tech

    E. Switch(vlan)# vlan 50

    F. Switch(vlan)# switchport trunk vlan 50


    参考答案：B, E

  • 第2题：

    What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。

    A.It creates a VLAN 999 interface.

    B.It designates VLAN 999 for untagged traffic.

    C.It blocks VLAN 999 traffic from passing on the trunk.

    D.It designates VLAN 999 as the default for all unknown tagged traffic.


    参考答案：B

  • 第3题：

    You are configuring a Cisco multilayer switch for the Company network.  Which command would  you use to configure a port to act as a routed interface？（）

    • A、 ip routing
    • B、 switchport mode trunk
    • C、 no switchport
    • D、 switchport trunk native vlan 1
    • E、 None of the other alternatives apply

    正确答案:C

  • 第4题：

    What is the effect of applying the switchport trunk encapsulation dot1q command to a port on a Cisco Catalyst switch？（）

    • A、By default， native VLAN packets going out this port will be tagged.
    • B、Without an encapsulation command， 802.1Q will be the default encapsulation if DTP fails to negotiate a trunking protocol.
    • C、The interface will support the reception of tagged and untagged traffic.
    • D、If the device connected to this port is not 802.1Q-enabled， it will not be able to handle 802.1Q packets.

    正确答案:C

  • 第5题：

    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the VLAN was added on all switches with the use of the show vlan command. 
    • C、Verify that the switch is configured to allow for trunking on the switch ports.
    • D、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

    正确答案:B

  • 第6题：

    Which command alone will disable trunking on a Layer 2 switch port？（）

    • A、no switchport trunk native vlan vlan-id
    • B、switchport nonegotiate
    • C、no switchport mode dynamic desirable
    • D、switchport mode access

    正确答案:D

  • 第7题：

    What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch（）。

    • A、It creates a VLAN 999 interface.
    • B、It designates VLAN 999 for untagged traffic.
    • C、It blocks VLAN 999 traffic from passing on the trunk.
    • D、It designates VLAN 999 as the default for all unknown tagged traffic.

    正确答案:B

  • 第8题：

    单选题
    What is the function of the command switchport trunk native vlan 999 on a？（）
    A

    It designates VLAN 999 for untagged traffic.

    B

    It blocks VLAN 999 traffic from passing on the trunk.

    C

    It createsa VLAN 999 interface.

    D

    It designates VLAN 999 as the default for all unkown tagged traffic.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）
    A

    All defined VLANs are allowed on the trunk by default.

    B

    Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C

    Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D

    Each VLAN, or VLAN range, that is specified with the vlan database command.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    You are configuring a Cisco multilayer switch for the Company network.  Which command would  you use to configure a port to act as a routed interface？（）
    A

     ip routing

    B

     switchport mode trunk

    C

     no switchport

    D

     switchport trunk native vlan 1

    E

     None of the other alternatives apply


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A new Company switch was just configured using the "switchport trunk native vlan 7" command.   What does this interface command accomplish？（）
    A

     Causes the interface to apply ISL framing for traffic on VLAN 7

    B

     Configures the trunking interface to forward traffic from VLAN 7

    C

     Configures the interface to be a trunking port and causes traffic on VLAN 7 to be 802.1q tagged

    D

     Configures the trunking interface to send traffic from VLAN 7 untagged

    E

     None of the other alternatives apply


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    What is the effect of applying the switchport trunk encapsulation dot1q command to a port on a Cisco Catalyst switch？（）
    A

    By default， native VLAN packets going out this port will be tagged.

    B

    Without an encapsulation command， 802.1Q will be the default encapsulation if DTP fails to negotiate a trunking protocol.

    C

    The interface will support the reception of tagged and untagged traffic.

    D

    If the device connected to this port is not 802.1Q-enabled， it will not be able to handle 802.1Q packets.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link()。

    A.By default, all defined VLANs are allowed on the trunk.

    B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.

    C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.

    D.Each single VLAN, or VLAN range, must be specified with the vlan database command.


    参考答案：A

  • 第14题：

    What is the function of the command switchport trunk native vlan 999 on a?()

    A.It designates VLAN 999 for untagged traffic.

    B.It blocks VLAN 999 traffic from passing on the trunk.

    C.It creates a VLAN 999 interface.

    D.It designates VLAN 999 as the default for all unkown tagged traffic.


    参考答案：D

  • 第15题：

    A new Company switch was just configured using the "switchport trunk native vlan 7" command.   What does this interface command accomplish？（）

    • A、 Causes the interface to apply ISL framing for traffic on VLAN 7
    • B、 Configures the trunking interface to forward traffic from VLAN 7
    • C、 Configures the interface to be a trunking port and causes traffic on VLAN 7 to be 802.1q tagged
    • D、 Configures the trunking interface to send traffic from VLAN 7 untagged
    • E、 None of the other alternatives apply

    正确答案:D

  • 第16题：

    What is the function of the command switchport trunk native vlan 999 on a？（）

    • A、It designates VLAN 999 for untagged traffic.
    • B、It blocks VLAN 999 traffic from passing on the trunk.
    • C、It createsa VLAN 999 interface.
    • D、It designates VLAN 999 as the default for all unkown tagged traffic.

    正确答案:D

  • 第17题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第18题：

    VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）

    • A、The command is accepted and the respective VLAN is added to vlan dat.
    • B、The command is rejected.
    • C、The command is accepted and you must configure the VLAN manually.
    • D、The port turns amber.

    正确答案:A

  • 第19题：

    You are the network administrator at Company and switch R1 is configured as shown below：  Interface gigethernet 0/1  Switchport mode trunk   Switchport trunk encapsulation dot1q  Switchport trunk native vlan 5   If untagged frames are arriving on interface gigethernet 0/1 of R1，  which of the following statement  are correct？（）

    • A、 Untagged frames are automatically assumed to be in VLAN 5.
    • B、 Untagged frames are defaulted to VLAN 1 traffic.
    • C、 Untagged frames are dropped because all packets are tagged when dot1q trunked.
    • D、 Untagged frames are determined on the other switch
    • E、 Untagged frames are not supported on 802.1Q trunks.

    正确答案:A

  • 第20题：

    单选题
    What is the function of the command switchport trunk native vlan 999 on a switch?（）
    A

    It designates VLAN 999 for untagged traffic.

    B

    It blocks VLAN 999 traffic from passing on the trunk.

    C

    It creates a VLAN 999 interface.

    D

    It designates VLAN 999 as the default for all unkown tagged traffic.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which command alone will disable trunking on a Layer 2 switch port？（）
    A

    no switchport trunk native vlan vlan-id

    B

    switchport nonegotiate

    C

    no switchport mode dynamic desirable

    D

    switchport mode access


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch?（）
    A

    It creates a VLAN 999 interface.

    B

    It designates VLAN 999 for untagged traffic.

    C

    It blocks VLAN 999 traffic from passing on the trunk.

    D

    It designates VLAN 999 as the default for all unknown tagged traffic.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）
    A

    All defined VLANs are allowed on the trunk by default.

    B

    Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C

    Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D

    Each VLAN, or VLAN range, that is specified with the vlan database command.


    正确答案： B
    解析： 暂无解析

相关内容