A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified w

题目
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

A. All defined VLANs are allowed on the trunk by default.

B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

D. Each VLAN, or VLAN range, that is specified with the vlan database command.

相似考题

1.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

2.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

3.Using a policy with the policy－rematch flag enabled, what happens to the existing and new sessions when you change the policy action from permit to deny?()A. The new sessions matching the policy are denied. The existing sessions are dropped.B. The new sessions matching the policy are denied. The existingsessions, not being allowed tocarry any traffic, simply timeout.C. The new sessions matching the policy might be allowed through if they match another policy. The existing sessions are dropped.D. The new sessions matching the policy are denied. The existing sessions continue until they are completed or their time.

4.A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. None of the above

更多“A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?() ”相关问题

  • 第1题：

    The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?（）

    A. The servers have not had VLAN tagging enabled on their NICs.

    B. Speed and duplex have not been set.

    C. VLAN tagging was not set on the trunk.

    D. The servers have been connected with CAT5 cable.


    参考答案：B

  • 第2题：

    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()

    A. The VLAN must be created

    B. The VLAN must be named

    C. An IP address and subnet mask must be configured for the new VLAN

    D. The desired ports must be added to the new VLAN

    E. The VLAN must be added to the existing VTP Domain


    参考答案：A, B, D

  • 第3题：

    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）

    • A、The VLAN must be created
    • B、The VLAN must be named
    • C、An IP address and subnet mask must be configured for the new VLAN
    • D、The desired ports must be added to the new VLAN
    • E、The VLAN must be added to the existing VTP Domain

    正确答案:A,B,D

  • 第4题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第5题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    • A、Switch(config)# switchport trunk encapsulation isl
    • B、Switch(config)# switchport trunk encapsulation ietf
    • C、Switch(config-if)# switchport trunk encapsulation isl
    • D、Switch(config-if)# switchport trunk encapsulation ietf
    • E、Switch(config-if)# switchport trunk encapsulation dot1q

    正确答案:E

  • 第6题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:A

  • 第7题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）

    • A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
    • B、You must set the same VTP management domain name on both switches.
    • C、You must set all ports on the two switches as access ports.
    • D、You must configure one of the switches as a VTP server.
    • E、You must use a rollover cable to connect the two switches.

    正确答案:B,D

  • 第8题：

    Using a policy with the policy-rematch flag enabled， what happens to the existing and newsessions when you change the policy action from permit to deny？（）

    • A、The new sessions matching the policy are denied. The existing sessions are dropped.
    • B、The new sessions matching the policy are denied. The existing sessions， not being allowed to carry any traffic， simply timeout.
    • C、The new sessions matching the policy might be allowed through if they match another policy. The existing sessions are dropped.
    • D、The new sessions matching the policy are denied. The existing sessions continue until they are completed or their timeout is reached.

    正确答案:A

  • 第9题：

    单选题
    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）
    A

    The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.

    B

    The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.

    C

    The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.

    D

    The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A customer wants to migrate their existing cluster onto new POWER6 hardware， and in addition requires thecluster to be migrated from PowerHA version 5.3 to 5.5. Given that AIX 6.1 and PowerHA 5.5 filesets arealready installed in the new hardware， which of the following methods would allow the customer to maintaintheir current cluster configuration？（）
    A

    Add the new nodes to the existing cluster， and perform a rolling migration and remove the original nodesfrom the cluster

    B

    Add the new nodes to the existing cluster， and perform a non-disruptive upgrade and remove the originalnodes from the cluster.

    C

    Create a snapshot of the existing cluster and apply the snapshot to the new cluster. Start cluster serviceson the new cluster and stop the original cluster

    D

    Create a snapshot of the existing cluster and apply the snapshot to the new cluster. Stop cluster serviceson the original cluster and start on the new cluster


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）
    A

    The VLAN must be created

    B

    The VLAN must be named

    C

    An IP address and subnet mask must be configured for the new VLAN

    D

    The desired ports must be added to the new VLAN

    E

    The VLAN must be added to the existing VTP Domain


    正确答案： E,D
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC?（）
    A

    An additional switch for the new HMC

    B

    Asynchronous adapters on the new HMC

    C

    The two 570 servers are directly connected to the new HMC

    D

    One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC


    正确答案： B
    解析： 暂无解析

  • 第13题：

    You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?

    A．Switch(config)# switchport trunk encapsulation isl

    B．Switch(config)# switchport trunk encapsulation ietf

    C．Switch(config-if)# switchport trunk encapsulation isl

    D．Switch(config-if)# switchport trunk encapsulation ietf

    E．Switch(config-if)# switchport trunk encapsulation dot1q


    正确答案：E
    解析：Explanation:
    The only real choices for setting up switching trunks are ISL and 802.1Q. ISL is Cisco proprietary, while 802.1Q uses the IEEE defined standard for trunking between switches.

    To configure the 802.1Q standard, the keyword "dot1q" is used in Cisco switches.

    Incorrect Answers:
    A, B, D. These are not valid options in a Cisco switch.

    C. ISL is a Cisco proprietary method for setting up trunks, and will only work between Cisco switches.

  • 第14题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link()。

    A.no VLANs

    B.all VLANs

    C.only VLANs 1 - 64

    D.only the VLANs that are specified when creating the trunk


    参考答案：B

  • 第15题：

    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）

    • A、The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.
    • B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.
    • C、The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.
    • D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.

    正确答案:B

  • 第16题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link（）。

    • A、By default, all defined VLANs are allowed on the trunk.
    • B、Each single VLAN, or VLAN range, must be specified with the switchport mode command.
    • C、Each single VLAN, or VLAN range, must be specified with the vtp domain command.
    • D、Each single VLAN, or VLAN range, must be specified with the vlan database command.

    正确答案:A

  • 第17题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。

    • A、no VLANs
    • B、all VLANs
    • C、only VLANs 1 - 64
    • D、only the VLANs that are specified when creating the trunk

    正确答案:B

  • 第18题：

    Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）

    • A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.
    • B、As a VTP server， the new switch deleted all VLANs of the network.
    • C、Erasing VLANs increases the VTP configuration revision.
    • D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.

    正确答案:C

  • 第19题：

    Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessionswhen you change the policy action from permit to deny? （）

    • A、The new sessions matching the policy are denied. The existing sessions are dropped.
    • B、The new sessions matching the policy are denied. The existing sessions, not being allowed to carry any traffic, simply timeout.
    • C、The new sessions matching the policy might be allowed through if they match another policy. The existing sessions are dropped.
    • D、The new sessions matching the policy are denied. The existing sessions continue until they are completed or their timeout is reached.

    正确答案:A

  • 第20题：

    单选题
    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）
    A

    Switch(config)# switchport trunk encapsulation isl

    B

    Switch(config)# switchport trunk encapsulation ietf

    C

    Switch(config-if)# switchport trunk encapsulation isl

    D

    Switch(config-if)# switchport trunk encapsulation ietf

    E

    Switch(config-if)# switchport trunk encapsulation dot1q


    正确答案： E
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator has an existing HMC and POWER6 570 connected to a network switch.  The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）
    A

    An additional switch for the new HMc  

    B

    Asynchronous adapters on the new HMc

    C

    The two 570 servers are directly connected to the new HMc  

    D

    One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link?（）
    A

    no VLANs

    B

    all VLANs

    C

    only VLANs 1 - 64

    D

    only the VLANs that are specified when creating the trunk


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessionswhen you change the policy action from permit to deny? （）
    A

    The new sessions matching the policy are denied. The existing sessions are dropped.

    B

    The new sessions matching the policy are denied. The existing sessions, not being allowed to carry any traffic, simply timeout.

    C

    The new sessions matching the policy might be allowed through if they match another policy. The existing sessions are dropped.

    D

    The new sessions matching the policy are denied. The existing sessions continue until they are completed or their timeout is reached.


    正确答案： D
    解析： 暂无解析

相关内容