A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. No

题目

A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?

A. No VLANs

B. Only the VLANs that are specified when creating the trunk

C. Only VLANs 1-64

D. All VLANs

E. All VLAN's except VLAN 1

F. None of the above

相似考题

1.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

2.Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?()A. All VLANs except the default VLAN will be removed from all switches.B. All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.C. The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.D. The VLANs Servers, Management, Production, and no-where will be removed from existing switches.

3.When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?()A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.

4.What are some of the characteristics of a typical VLAN arrangement, found throughout the Ezonexam switched LAN? (Select all that apply)A. VLANs logically divide a switch into multiple, independent switches at Layer 2.B. Trunk links can carry traffic for multiple VLANs.C. VLAN implementation significantly increases traffic due to added trunking information.D. A VLAN can span multiple switches.E. VLANs typically increase the number of switches neededF. VLANs typically decrease the number of switches needed

更多“A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. No”相关问题

  • 第1题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

    A. All defined VLANs are allowed on the trunk by default.

    B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D. Each VLAN, or VLAN range, that is specified with the vlan database command.


    参考答案：C

  • 第2题：

    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）

    A.The access link needs to be configured in multiple VLANs.

    B.The link between the switches is configured in the wrong VLAN.

    C.The link between the switches needs to be configured as a trunk.

    D.VTP is not configured to carry VLAN information between the switches.

    E.Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    参考答案：C

  • 第3题：

    A company has a small network，consisting of a single switch and a single router. The switch has been configured with two vlans，and route-on-a-stick is being configured on the router for inter-vlan routing. A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate？（）

    A.one

    B.three

    C.two

    D.zero


    参考答案：C

  • 第4题：

    Which statement is most correct regarding vNICs and VLANs?（）

    • A、only the default vlan has traffic that is tagged
    • B、All vNICs have to be associated with one or more VLANs except for the default vlan
    • C、vlan must be configured before configuring them into a vNIC
    • D、Tagging is done by the operating system NIC if the flag is set to tag traffic

    正确答案:C

  • 第5题：

    A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）

    • A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the  OSPF configuration.
    • B、For the two vlans to communicate， a network statement for each subinterface needs to be  added  to the OSPF configuration.
    • C、Direct inter-vlan communication does not require OSPF
    • D、OSPF cannot be used if router-on-a-stick is configured on the router

    正确答案:C

  • 第6题：

    The DAI feature has been implemented in the Company switched LAN.  Which three statements  are true about the dynamic ARP inspection （DAI） feature？ （）

    • A、 DAI can be performed on ingress ports only.
    • B、 DAI can be performed on both ingress and egress ports.
    • C、 DAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports.  
    • D、 DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP  caches of hosts in the domain.
    • E、 DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.
    • F、 DAI is supported on access and trunk ports only.

    正确答案:A,C,E

  • 第7题：

    You are troubleshooting a Catalyst 5000 trunk in the network. What should you do if there’s adisagreement about the VLANs configured to use the trunk？（）

    • A、Reload the active VLAN configuration
    • B、Clear the affected port and bring it up again
    • C、Explicitly set the trunk for the VLAN to be on
    • D、Remove all the VLANs set

    正确答案:B

  • 第8题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。

    • A、no VLANs
    • B、all VLANs
    • C、only VLANs 1 - 64
    • D、only the VLANs that are specified when creating the trunk

    正确答案:B

  • 第9题：

    单选题
    Refer to the exhibit A frame on vlan 1 on switch s1 is sent to switch s2 when the frame is received on vlan 2,what causes this behavior?（）
    A

    trunk mode mismatches

    B

    vlans that do not correspond to a unique IP subnet

    C

    native vlan mismatches

    D

    allowing only vlan 2 on the destination.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）
    A

    For the two vlans to communicate，a network statement for the trunk interface needs to be added to the  OSPF configuration.

    B

    For the two vlans to communicate， a network statement for each subinterface needs to be  added  to the OSPF configuration.

    C

    Direct inter-vlan communication does not require OSPF

    D

    OSPF cannot be used if router-on-a-stick is configured on the router


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）
    A

    All defined VLANs are allowed on the trunk by default.

    B

    Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C

    Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D

    Each VLAN, or VLAN range, that is specified with the vlan database command.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）
    A

    All defined VLANs are allowed on the trunk by default.

    B

    Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C

    Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D

    Each VLAN, or VLAN range, that is specified with the vlan database command.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）

    A. one

    B. three

    C. two

    D. zero


    参考答案：C

  • 第14题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link()。

    A.By default, all defined VLANs are allowed on the trunk.

    B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.

    C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.

    D.Each single VLAN, or VLAN range, must be specified with the vlan database command.


    参考答案：A

  • 第15题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link()。

    A.no VLANs

    B.all VLANs

    C.only VLANs 1 - 64

    D.only the VLANs that are specified when creating the trunk


    参考答案：B

  • 第16题：

    You have configured voice VLANs on Catalyst switch R1.  Which two statements are true about the  operation of voice VLANs on this device？ （）

    • A、 When the voice VLAN feature is enabled， all untagged traffic is sent according to the default  CoS priority of the port.
    • B、 Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a  port.
    • C、 When voice VLANs are configured on a trunk link， UplinkFast must also be enabled.
    • D、 Voice VLANs are configured to enable the switch to forward frames marked with the proper  CoS values over separate physical links.
    • E、 Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.

    正确答案:A,E

  • 第17题：

    Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?（）

    • A、All VLANs except the default VLAN will be removed from all switches.
    • B、All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.
    • C、The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.
    • D、The VLANs Servers, Management, Production, and no-where will be removed from existing switches.

    正确答案:D

  • 第18题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第19题：

    Refer to the exhibit A frame on vlan 1on switch s1 is sent to switch s2 when the frame is received on vlan 2,what causes this behavior?（）

    • A、trunk mode mismatches
    • B、vlans that do not correspond to a unique IP subnet
    • C、native vlan mismatches
    • D、allowing only vlan 2 on the destination.

    正确答案:C

  • 第20题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:A

  • 第21题：

    多选题
    You have configured voice VLANs on Catalyst switch R1.  Which two statements are true about the  operation of voice VLANs on this device？ （）
    A

    When the voice VLAN feature is enabled， all untagged traffic is sent according to the default  CoS priority of the port.

    B

    Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a  port.

    C

    When voice VLANs are configured on a trunk link， UplinkFast must also be enabled.

    D

    Voice VLANs are configured to enable the switch to forward frames marked with the proper  CoS values over separate physical links.

    E

    Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.


    正确答案： C,D
    解析： 暂无解析

  • 第22题：

    多选题
    The DAI feature has been implemented in the Company switched LAN.  Which three statements  are true about the dynamic ARP inspection （DAI） feature？ （）
    A

    DAI can be performed on ingress ports only.

    B

    DAI can be performed on both ingress and egress ports.

    C

    DAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports.

    D

    DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP  caches of hosts in the domain.

    E

    DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.

    F

    DAI is supported on access and trunk ports only.


    正确答案： A,D
    解析： 暂无解析

  • 第23题：

    单选题
    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。
    A

    no VLANs

    B

    all VLANs

    C

    only VLANs 1 - 64

    D

    only the VLANs that are specified when creating the trunk


    正确答案： C
    解析： 暂无解析

相关内容