In the statistical analysis method of Engineering quality,it is generally adopted to find the primary and secondary factors affecting the quality（ ） 在工程质量统计分析方法中，寻找影响质量主次因素的方法一般采用（ ）。A.Permutation graph method 排列图法B.Causal Analysis Graph 因果分析图法C.histogram

题目
In the statistical analysis method of Engineering quality,it is generally adopted to find the primary and secondary factors affecting the quality（ ）
在工程质量统计分析方法中，寻找影响质量主次因素的方法一般采用（ ）。

A.Permutation graph method
排列图法
B.Causal Analysis Graph
因果分析图法
C.histogram method
直方图法
D.Control Chart Method
控制图法
相似考题

1.The key ingredient to a successful quality management program are _____.A . management's quality philosophy, operational quality assurance and operational quality control.B . quality evaluation methods and functional quality integrators.C . technical quality administration, the technical quality specifications, and the quality process review.D . quality evaluation methods, quality progress reviews and the technical quality specifications.E . All of the above.

2.VThe Pareto Principle is a technique used to determine which quality control problems in a particular process should be corrected. Which of the following statements best represents the philosophy employed by this principle?A . In order to minimize financial losses from quality control problems, all problems which have a measureable cost should be correctedB . the majority of defects are caused by a small percentage of the identifiable problems. Improvement efforts should be reserved for these vital problems.C . in order to achieve zero defects, all quality control problems, including those which do not have a direct financial cost should be corrected.D . generally, 80% of the quality control problems are justifiable for correction via cost-benefit analysis. The remaining 20% are not financially worthy of improvement efforts.E . A and D

3.158 The Pareto Principle is a technique used by quality managers to determine which quality control problems of a particular service or manufacturing process should be corrected. Which of the following statements represents the philosophy of the principle?A. In order to minimize financial losses from quality control problems, all problems which have a measurable cost associated with them should be corrected.B. the majority of defects are caused by a small percentage of the identifiable problems. Improvements efforts should be reserved for these vital few problems.C. in order to achieve zero defects, all quality control problems, including those which do not have a direct financial cost should be corrected.D. generally, 80 % of the quality control problems are justifiable for correction via cost-benefit analysis. The remaining 20% are not financially worthy of improvement efforts.E. A and D

4.The Pareto Principle is a technique used by quality managers to determine which quality control problems of a particular service or manufacturing process should be corrected. Which of the following statements represents the philosophy of the principle?A . In order to minimize financial losses from quality control problems, all problems which have a measurable cost associated with them should be corrected.B . the majority of defects are caused by a small percentage of the identifiable problems. Improvements efforts should be reserved for these vital few problems.C . in order to achieve zero defects, all quality control problems, including those which do not have a direct financial cost should be corrected.D . generally, 80 % of the quality control problems are justifiable for correction via cost-benefit analysis. The remaining 20% are not financially worthy of improvement efforts.E . A and D

更多“In the statistical analysis method of Engineering quality,it is generally adopted to find the primary and secondary factors affecting the quality（ ） ”相关问题

  • 第1题：

    87 The key ingredient to a successful quality management program are _____.

    A. management's quality philosophy, operational quality assurance and operational quality control. B. quality evaluation methods and functional quality integrators.

    C. technical quality administration, the technical quality specifications, and the quality process review. D. quality evaluation methods, quality progress reviews and the technical quality specifications.

    E. All of the above


    正确答案：A

  • 第2题：

    帮我下面这段摘要 修改下,看看有没有明显的错误。谢谢!!

    摘要：目的：调查临安市城市社区老年人生活质量及其影响因素，为提高老年人生活质量提供建议与对策。方法：采取随机抽样的方式，对临安市城市社区153名老年人进行调查，并用SPSS统计分析软件对调查数据进行分析。结果：学历、收入、配偶的有无情况、参加社会活动的频率对生活质量有显著性影响。结论：影响老年人生活质量的因素是多方面的，应给予相应的干预措施以进一步提高老年人的生活质量。关键词：老年人；生活质量；影响因素The investigation and analysis of the quality of life of elderlyAbstract: Purpose: to investigate the old’s quality of life and the factors influencing it in communities of Lin’an City. Provide suggestions and methods to the old in order to improve their quality of life. Method: to pick 153 oldsters randomly and study them. Then analyze the survey data with SPSS statistical analysis software. Result of survey: the factors that influence life quality include education, income, marital status, frequency of participations in social activities. Conclusion: The factors that influence the old’s life quality are extensive. And they should be managed to improve the old’s life quality.Key words：The elderly, quality of life, influencing factors


    The Survey and Analysis of the old's quality of life (QOL) in the Community of Lin'an City
    Abstract:
    Purpose: to investigate the old's QOL and the factors influencing it in communities of Lin'an City, and provide suggestions and methods to the old in order to improve their QOL. Method: to pick 153 oldsters randomly and study them. Then analyze the survey data with SPSS statistical analysis software. Result of survey: the factors that influence the QOL include education, income, marital status, frequency of participations in social activities. Conclusion: The factors that influence the old's QOL are extensive. And they should be managed to improve the old's QOL.

    Key words：The old, QOL , influencing factors

    Abstract: objective: to investigate the linan city urban community elderly life quality and its influencing factors, so as to improve the elderly life quality provide Suggestions and countermeasures. Methods: by random sampling, the way of linan city urban community of 153, and the investigation of SPSS statistical analysis software analysis research data. Results: the degree, income, spouse or participating in social activities, the frequency to the quality of life have significant influence. Conclusion: affect older people life quality factor is various, should give corresponding intervention measures to further improve the elderly's quality of life. Keywords: elderly; The quality of life; Influence factors
    这样翻译就行，你的翻译也可以

    没有
    The Survey and Analysis of the old's quality of life (QOL) in the Community of Lin'an City Abstract: Purpose: to investigate the old's QOL and the factors influencing it in communities of Lin'an City, and provide suggestions and methods to the old in order to improve their QOL. Method: to pick 153 oldsters randomly and study them. Then analyze the survey data with SPSS statistical analysis software. Result of survey: the factors that influence the QOL include education, income, marital status, frequency of participations in social activities. Conclusion: The factors that influence the old's QOL are extensive. And they should be managed to improve the old's QOL.Key words：The old, QOL , influencing factors
    没有吧 挺好的

  • 第3题：

    The price of commodities()on many factors like quality, demand, supply, etc.

    A、 is basing

    B、 has based

    C、 is based


    参考答案：C

  • 第4题：

    ● Plan Quality is the process of identifying quality requirements and standards for the project and product, and documenting how the project will demonstrate compliance．（75） is a method that analyze all the costs incurred over the life of the product by investment in preventing nonconformance to requirements, appraising the product or service for conformance to requirement, and failing to meet requirements．

    （75）

    A．Cost-Benefit analysis

    B．Control charts

    C．Quality function deployment

    D．Cost of quality analysis


    正确答案：D
    试题（75）分析
     质量分析成本Cost of quality analysis是对产品或服务进行需求一致性分析所产生的成本；
     成本效益分析Cost-Benefit analysi是通过比较项目的全部成本和效益来评估项目价值的一种方法；
     控制图Control charts是项目质量控制方法；
     质量功能展开Quality function deployment是把顾客或市场的要求转化为设计要求、零部件特性、工艺要求、生产要求的多层次演绎分析方法
     因此，因此选D
    参考答案
    （75）D

  • 第5题：

    Software quality assurance is now an(71)sub-discipline of software engineering. As Bucldy and Oston point out,(72)software quality assurance is likely to lead to an ultimate(73)of software costs. However, the major hurdle in the path of software management in this area is the lack of(74)software standards. The development of accepted and generally applicable standards should be one of the principal goals of(75)in software engineering.

    A．emerging

    B．emergent

    C．engaging

    D．evolve


    正确答案：A
    解析：现在软件质量保证足软件工程的新兴的附属要求。正如Buckly和Oston所指出，有效的软件质量保证很可能影响软件成本最终的增长。不过，在软件管理过程中主要的障碍是缺乏可用的软件标准。适用性软件标准的开发应该是在软什工程里主要研究目标之一。

  • 第6题：

    Perform. Quality Control is the process of monitoring and recording results of executing the Quality Plan activities to assess performance and recommend necessary changes. ______ are the techniques and tools in performing quality control.. ① Statistical sampling ② Run chart ③ Control charts ④ Critical Path Method ⑤ Pareto chart ⑥ Cause and effect diagrams

    A．①②③④

    B．②③④⑤

    C．①②③⑤⑥

    D．①③⑤⑥


    正确答案：C

  • 第7题：

    Software quality assurance is now an emerging sub - discipline of(36). As Buckly and oston point out,(37) software quality assurance is likely to lead to an ultimate(38) of software costs. However, the major hurdle in the path of software management in this area is the lack of usable software(39). The development of accepted and generally applicable standards should be one of the principal goals of(40) in software engineering.

    A．software engineering

    B．software design

    C．coding

    D．testing


    正确答案：A

  • 第8题：

    Perform Quality Control is the process of monitoring and recording results*of executing the Quality Plan activities to assess performance and recommend necessary changes.（） are the techniques and tools in performing quality control① Statistical sampling ② Run chart③ Control charts ④ Critical Path Method⑤ Pareto chart⑥ Cause and effect diagrams

    A.①②③④
    B.②③④⑤
    C.①②③⑤⑥
    D.①③④⑤⑥

    答案：C
    解析：
    实现项目质量控制的方法、技术和工具包括统计抽样（Statistical sampling）、运行图 （Run chart）、控制图（Control charts）、帕累托图（Pareto chart），以及因果图（Cause and effect diagrams）等。关键路径法（Critical Path Method）是制定项目进度计划的方法，因此选C。

  • 第9题：

    （ ） Assesses the priority of identified risks using their probability of occurring，the corresponding impact on project objectives if the risks do occur，as well as other factors such as the time frame and risk tolerance of the project constraints of cost，schedule，scope，and quality.

    A.Quantitative Risk Analysis
    B.Qualitative Risk Analysis
    C.Enterprise Environmental Factors
    D.Risk Management Plan

    答案：B
    解析：
    翻译：（71）利用风险发生概率、风险一旦发生对项目产生的影响以及其他因素（如时间框架和项目制约条件，即成本、进度、范围、质量的风险承受度水平），对已识别风险进行优先级的评估。A．定量风险分析 B．定性风险分析 C．企业环境因素 D．风险管理计划

  • 第10题：

    We are disappointed to find that the quality of the products here（）very poor.

    • A、to be  
    • B、have been   
    • C、is
    • D、being

    正确答案:C

  • 第11题：

    单选题
    In diesel engineering practice, the term used to express the ignition quality of a particular fuel is（）
    A

    cetane number

    B

    octane number

    C

    ignition index number

    D

    volatility point


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    The price of commodities （）on many factors like quality， demand， supply， etc.
    A

    is basing

    B

    has based

    C

    is based


    正确答案： B
    解析： 暂无解析

  • 第13题：

    从供选择的答案中选出应填入英语文句中()的正确的答案。

    Software quality assurance is now an (A) sub-discipline of software engineering. As Buckly and Oston point out, (B) software quality assurance is likely to lead to an ultimate (C) of software costs. However, the major hurdle in the path of software management in this area is the lack of (D) software standards. The development of accepted and generally applicable standards should be one of the principal goals of (E) in software engineering.

    A: ① emerging ② emergent ③ engaging ④ evolve

    B: ① effective ② effortless ③ light ④ week

    C: ① balance ② growth ③ production ④ reduction

    D: ① usable ② usage ③ useless ④ useness

    E: ① management ② planning ③ production ④ research


    正确答案：A: ① B: ① C: ② D: ① E: ④
    A: ① B: ① C: ② D: ① E: ④

  • 第14题：

    Generally speaking, there are two systems of primary and secondary education in Britain －－－ the state school and the independent school or the () school.

    A.private

    B.public

    C.national

    D.boarding


    正确答案: B

  • 第15题：

    ● Perform Quality Control is the process of monitoring and recording results of executing the Quality Plan activities to assess performance and recommend necessary changes．(74) are the techniques and tools in performing quality control．

    Statistical sampling ① Run chart ②

    Control charts ③ Critical Path Method ④

    Pareto chart ⑤ Cause and effect diagrams ⑥

    (74)

    A．①②③④

    B．②③④⑤

    C．①②③⑤⑥

    D．①③④⑤⑥


    正确答案：C
    试题（74）分析
    实现项目质量控制的方法、技术和工具包括统计抽样Statistical sampling，运行图Run chart、控制图Control charts、帕累托图Pareto chart，以及因果图Cause and effect diagrams等。
    关键路径法Critical Path Method是制定项目进度计划的方法，因此选C
    参考答案
    （74）C

     

  • 第16题：

    The data station usually means a(71)unit that provides data for transmission, that accepts transmitted data, and that performs all functions necessary for communication with another functional unit. Data stations may be divided into two kinds, the primary stations and the secondary stations, (72)control functions.In(73)data link control, the primary station is the data station that supports the primary control functions of the data link, generates commands to be transmitted, and interprets received responses. Specific responsibilities assigned to the primary station include initialization of control signal interchange, organization of data flow and actions regarding error control and error recovery functions. The secondary station executes data link control functions as (74)by the primary station, interprets received commands and (75) responses to be transmitted.

    A．performance

    B．functional

    C．capacity

    D．quality


    正确答案：B

  • 第17题：

    A PM wanted to show management，visually how quality controls were affecting processes．The best tool to accomplish this is(74) .

    A．Diagrams

    B．Histograms

    C．Flowcharts

    D．Control charts


    正确答案：D
    解析：项目经理要想更直观地表示出质量控制是如何影响项目进度的，最好的工具是控制图。

  • 第18题：

    Plan Quality is the process of identifying quality requirements and standards for the project and product and documenting how the project will demonstrate compliance ______ is a method that analyze all the costs incurred over the life of the product by investment in preventing nonconformance to requirements, appraising the product or service for conformance to requirement and failing to meet requirements.

    A．Cost-Benefit analysis

    B．Control charts

    C．Quality function deployment

    D．Cost of quality analysis


    正确答案：D

  • 第19题：

    Plan Quality is the process of identifying quality requirements and standards for the project and product, and documenting how the project will demonstrate compliance．（ ） is a method that analyze all the costs incurred over the life of the product by investment in preventing nonconformance to requirements, appraising the product or service for conformance to requirement, and failing to meet requirements．

    A.Cost-Benefit analysis
    B.Control charts
    C.Quality function deployment
    D.Cost of quality analysis

    答案：D
    解析：

  • 第20题：

    Generally speaking, quality inspection is ( ) of visual inspection and interior inspection.
    A. composed B. each
    C. one D. result


    答案：A
    解析：

  • 第21题：

    We are disappointed to find that the quality of the products here（）very poor.

    Ato be  

    Bhave been   

    Cis

    Dbeing


    C
    略

  • 第22题：

    单选题
    We are disappointed to find that the quality of the products here（）very poor.
    A

    to be  

    B

    have been   

    C

    is

    D

    being


    正确答案： A
    解析： 暂无解析

  • 第23题：

    填空题
    Price, quality and food safety were the most important factors for consumers according to the DPI’s research in 2004.____

    正确答案： B
    解析：
    由题干中“the most important factors 和the DPI’s research in 2004”定位至B段。该段表明价格、质量和食品安全（price, quality and food safety）仍然是影响消费者最重要的因素。故匹配段落为B段。

相关内容