What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?()A. a straight-through cableB. an EIA/TIA-232 serial cableC. an auxiliary cableD. a modem cableE. a cross-over cable

题目
What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?()

A. a straight-through cable

B. an EIA/TIA-232 serial cable

C. an auxiliary cable

D. a modem cable

E. a cross-over cable

相似考题

1.What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.What kind of cable should be used to establish a trunked line between two Catalyst switches?A．A straight-through cableB．An EIA/TIA-232 serial cableC．An auxiliary cableD．A modem cableE．A cross-over cable

3.What must an administrator do in order to successfully configure a VLAN trunk between two switches?()A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

4.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

更多“What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?() ”相关问题

  • 第1题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    A.UTP cable

    B.STP cable

    C.coaxial cable

    D.fiber optic cable


    参考答案：D

  • 第2题：

    What is the purpose of the command shown below?vtp password Fl0r1da（）

    • A、It is used to validate the sources of VTP advertisements sent between switches.
    • B、It is used to access the VTP server to make changes to the VTP configuration.
    • C、It allows two VTP servers to exist in the same domain, each configured with different passwords.
    • D、It is the password required when promoting a switch from VTP client mode to VTP server mode.
    • E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

    正确答案:A

  • 第3题：

    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）

    • A、 Cisco Catalyst 2800
    • B、 Cisco Catalyst 3550
    • C、 Cisco Catalyst 3750
    • D、 Cisco Catalyst 4500
    • E、 Cisco Catalyst 6500

    正确答案:D,E

  • 第4题：

    Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?（）

    • A、Rollover cable
    • B、Console cab le
    • C、Crossover cable
    • D、Straight-through cable
    • E、Serial cable

    正确答案:C

  • 第5题：

    Which two of these Cisco Catalyst are distribution-area switches？ （）

    • A、 Catalyst 2800/E Series
    • B、 Catalyst 3750 Series
    • C、 Catalyst 3900/E Series
    • D、 Catalyst 4500/E Series
    • E、 Catalyst 6500/E Series

    正确答案:B,D

  • 第6题：

    What accurately describes the usage of a Cisco AutoQoS command？（）

    • A、on Catalyst switches， the show auto discovery qos command is used to display the data collected during the Auto-Discovery phase
    • B、on Catalyst switches， the show auto qos command is used to display packet statistics of all classes that are configured for all service policies
    • C、on Cisco routers， the show mls qos maps command is used to verify the CoS-to-DSCP maps for egress packet queuing
    • D、on Cisco routers， the show auto qos command is used to display the AutoQoS interface templates， policy maps， class maps， and ACLs

    正确答案:D

  • 第7题：

    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）

    • A、CAT3 cable
    • B、Serial cable
    • C、Crossover cable
    • D、Rollover cable

    正确答案:C

  • 第8题：

    多选题
    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）
    A

    Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B

    Set the same VTP management domain name on both switches.

    C

    Set all ports on the two switched as access ports.

    D

    Configure one of the two switches as a VTP server.

    E

    Connect the two switches using a rollover cable.

    F

    Use a router to forward VTP traffic between the VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第9题：

    单选题
    Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?（）
    A

    Rollover cable

    B

    Console cab le

    C

    Crossover cable

    D

    Straight-through cable

    E

    Serial cable


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?（）
    A

    a straight-through cable

    B

    an EIA/TIA-232 serial cable

    C

    an auxiliary cable

    D

    a modem cable

    E

    a cross-over cable


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    What form of AutoQoS is supported on Cisco Catalyst 2950 switches with the Enhanced Image？（）
    A

    AutoQos Enterprise

    B

    AutoQoS Campus

    C

    AutoQoS VoIP

    D

    AutoQoS LAN


    正确答案： C
    解析： 暂无解析

  • 第12题：

    多选题
    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）
    A

    Cisco Catalyst 2800

    B

    Cisco Catalyst 3550

    C

    Cisco Catalyst 3750

    D

    Cisco Catalyst 4500

    E

    Cisco Catalyst 6500


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    You are deploying two core switches， one in each building， 50 km away from each other. The cross-connection between them will be a Layer 2 2-gigabit EtherChannel with an 802.1Q trunk. You configured it correctly but the link does not come up. The port is in the "admin up" state， and the line protocol is in the "down" state. The fiber link is OK. What would be the most likely reason for the link not to come up？ （）

    • A、 The switches are not the same model
    • B、 You are not using the correct SFP
    • C、 You are not using correct optical media converters
    • D、 Configuration should be modified， because the distance is longer

    正确答案:B

  • 第14题：

    What is the objective of Diffie-Hellman？（）

    • A、used to verify the identity of the peer
    • B、used between the initiator and the responder to establish a basic security policy
    • C、used to establish a symmetric shared key via a public key exchange process
    • D、used for asymmetric public key encryption

    正确答案:C

  • 第15题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第16题：

    What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?（）

    • A、a straight-through cable
    • B、an EIA/TIA-232 serial cable
    • C、an auxiliary cable
    • D、a modem cable
    • E、a cross-over cable

    正确答案:E

  • 第17题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    • A、UTP cable
    • B、STP cable
    • C、coaxial cable
    • D、fiber optic cable

    正确答案:D

  • 第18题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）

    • A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
    • B、You must set the same VTP management domain name on both switches.
    • C、You must set all ports on the two switches as access ports.
    • D、You must configure one of the switches as a VTP server.
    • E、You must use a rollover cable to connect the two switches.

    正确答案:B,D

  • 第19题：

    单选题
    You are deploying two core switches， one in each building， 50 km away from each other. The cross-connection between them will be a Layer 2 2-gigabit EtherChannel with an 802.1Q trunk. You configured it correctly but the link does not come up. The port is in the "admin up" state， and the line protocol is in the "down" state. The fiber link is OK. What would be the most likely reason for the link not to come up？ （）
    A

     The switches are not the same model

    B

     You are not using the correct SFP

    C

     You are not using correct optical media converters

    D

     Configuration should be modified， because the distance is longer


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    If the situation arose where it became necessary to tow a disabled vessel，which statement is TRUE concerning the towing line?（）.
    A

    The towing line between the two vessels should be clear of the water

    B

    The towing line should be taut at all times between the vessels

    C

    There should be a catenary so the line dips into the water

    D

    None of the above


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    What is NOT a requirement for testing the line throwing appliance on a vessel? （）
    A

    The appliance should be tested every three months

    B

    A regular service line should be used when testing

    C

    A regular projectile should be used when testing

    D

    An entry about the test must be made in the Official Log Book


    正确答案： B
    解析： 暂无解析

  • 第22题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access ports.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    单选题
    What accurately describes the usage of a Cisco AutoQoS command？（）
    A

    on Catalyst switches， the show auto discovery qos command is used to display the data collected during the Auto-Discovery phase

    B

    on Catalyst switches， the show auto qos command is used to display packet statistics of all classes that are configured for all service policies

    C

    on Cisco routers， the show mls qos maps command is used to verify the CoS-to-DSCP maps for egress packet queuing

    D

    on Cisco routers， the show auto qos command is used to display the AutoQoS interface templates， policy maps， class maps， and ACLs


    正确答案： C
    解析： 暂无解析

相关内容