Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area I

题目

Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual link but not found from 20.20.20.1, Serial 0 .How should the virtual link be configured on the OSPF routers to establish full connectivity between the areas?（）

A.R1(config - router)# area 0 virtual - link 1.1.1.1R3(config - router)# area 2 virtual - link 3.3.3.3

B.R1(config - router)# area 1 virtual - link 2.2.2.2 R3(config - router)# area 1 virtual - link 2.2.2.2

C.R1(config - router)# area 1 virtual - link 20.20 .20.2 R3(config - router)# area 1 virtual - link 30.30.30.2

D.R1(config - router)# area 1 virtual - link 30.30.30.3 R3(config - router)# area 1 virtual - link 20.20.20.1

E.R1(config - router)# area 1 virtual - link 3.3.3.3 R3(config - router)# area 1 virtual - link 1.1 .1.1

相似考题

1.How is the cost of a virtual link in OSPF calculated?()A. Takes the metric of the outgoing interface.B. Uses the metric that is assigned during configuration.C. Uses the path metric to reach the virtual link neighbor.D. Uses a default of zero unless otherwise specified.

2.Refer to the exhibit. What is the effect of the OSPF configuration on router B?()A. All interfaces will be in area 0B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2

3.Refer to the exhibit. Based on this command output, what can we conclude about R3?()A. R3 is an ABR.B. R3 is not connec ted to the backbone.C. R3 has four neighbors.D. R3 is the DR for area 2.

4.Refer to the exhibit. Will redistribute d RIP routes from OSPF Area 2 be allowed in Area 1? ()A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.

更多“Refer to the exhibit. During the process of configuring a virtual link to connect area 2 w ”相关问题

  • 第1题：

    Refer to the exhibit. A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2. As the router configuration specialist, what two things would you do to accomplish this goal?（）

    A. Enter the configuration on router B1.

    B. Enter the configuration on router B4.

    C. On the same router, enter the Summary - address 10.10.1.0 255.255.255.128 subcommand.

    D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.

    E. On the same ro uter, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.


    参考答案：A, D

  • 第2题：

    Refer to the exhibit. OSPF is configured on all routers in the network. On the basis of the show ip ospf n eighbor output, what prevents R1 from establishing a full adjacency with R2? ()

    A. Router R1 will only establish full adjacency with the DR and BDR on broadcast multi- access networks.

    B. Router R2 has been elected as a DR for the broadcast multiaccess network in OSPF area 1.

    C. Routers R1 and R2 are configured as stub routers for OSPF area 1 and OSPF area 2.

    D. Router R1 and R2 are configured for a virtual link between OSPF area 1 and OSPF area 2.

    E. The Hello parameters on routers R1 and R2 do not m atch.


    参考答案：A

  • 第3题：

    Under which circumstance, ie network type, would an OSPF router establish a neighbor adjacency, even though the DR／BDR election process was not performed?()

    A. Point-to-point

    B. Broadcast multicast

    C. Nonbroadcast multicast

    D. Backbone area 0

    E. Virtual Link


    参考答案：A

  • 第4题：

    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?()

    A.data link layer

    B.application layer

    C.access layer

    D.session layer

    E.network layer


    参考答案：E

  • 第5题：

    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）

    • A、A virtual link to area 0.
    • B、OSPF summarization command.
    • C、default - cost extension to the area command.
    • D、no - summary extension to the area stub comm and.
    • E、None of the other alternatives apply

    正确答案:D

  • 第6题：

    Several links have been broken so th at for the next day or two, what was formerly a contiguous area 0 has been broken into two parts. However, both parts of area 0 have working links into area 1 using routers with RID 1.1.1.1 and 2.2.2.2. Which answers list the command on the router with RID 1.1.1.1 to create a virtual link to help solve this temporary problem?（）

    • A、area 0 virtual - link 2.2.2.2
    • B、area 1 virtual - link 2.2.2.2
    • C、area 0 source - rid 1.1.1.1 dest - rid 2.2.2.2
    • D、virtual - link transit - area 1 RID 2.2.2.2

    正确答案:B

  • 第7题：

    What is the correct virtual link configuration on an OSPF router？（）

    • A、area 0.0.0.0{ linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}
    • B、area 0.0.0.0{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}
    • C、area 0.0.0.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}
    • D、area 0.0.2.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.0.0；}

    正确答案:B

  • 第8题：

    单选题
    When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?（）
    A

    OSPF process ID

    B

    OSPF router ID

    C

    OSPF network type

    D

    OSPF memory usage

    E

    OSPF CPU utilization

    F

    OSPF stub area configurations


    正确答案： F
    解析： 暂无解析

  • 第9题：

    单选题
    Refer to the exibit. Three cisco 2950 switches are set to their default priority sttings.During the spanningtree process,which switch will be elected as the root bridge?（）
    A

    Switch3

    B

    Switch4

    C

    Switch2

    D

    Switch1


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Several links have been broken so th at for the next day or two, what was formerly a contiguous area 0 has been broken into two parts. However, both parts of area 0 have working links into area 1 using routers with RID 1.1.1.1 and 2.2.2.2. Which answers list the command on the router with RID 1.1.1.1 to create a virtual link to help solve this temporary problem?（）
    A

    area 0 virtual - link 2.2.2.2

    B

    area 1 virtual - link 2.2.2.2

    C

    area 0 source - rid 1.1.1.1 dest - rid 2.2.2.2

    D

    virtual - link transit - area 1 RID 2.2.2.2


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Why would you make a non-backbone area a stub or not-so-stubby area?（）
    A

    to aggregate routes learned from the ABR

    B

    to lower the cost of routes advertised by the ABR

    C

    to connect a non-contiguous area to the backbone

    D

    to decrease the size of the link-state database in that area


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    What is the correct virtual link configuration on an OSPF router？（）
    A

    area 0.0.0.0{ linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}

    B

    area 0.0.0.0{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}

    C

    area 0.0.0.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.2.1；}

    D

    area 0.0.2.1{ virtual-linkneighbor-id 172.168.18.2 transit-area 0.0.0.0；}


    正确答案： B
    解析： 暂无解析

  • 第13题：

    When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?()

    A. OSPF process ID

    B. OSPF router ID

    C. OSPF network type

    D. OSPF memory usage

    E. OSPF CPU utilization

    F. OSPF stub area configurations


    参考答案：B

  • 第14题：

    Refer to the exhibit. What two statements are true?()

    A. This is the designated router (DR) on the FastEthernet 0/0 link.

    B. The output was generated by the show ip interface c ommand.

    C. The router was configured with the commands:r outer ospf 1 network 172.16.6.0 0.0.0.255 area 1

    D. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.

    E. Interface FastEthernet 0/0 was configured with the ipv6 o spf 1 area 1 command.

    F. OSPF version 2 has been enabled to support IPv6.


    参考答案：D, E

  • 第15题：

    Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?()

    A.The loopback addresses are on different subnets

    B.The value of the dead timers on the router are different

    C.Route summarization is enabled on both routers

    D.The process indentifier on router A is different than the process identifier on router B


    参考答案：B

  • 第16题：

    Refer to the exhibit. Which value will be configured for Default Gateway of the Local Area Connection?()

    A.10.0.0.0

    B.10.0.0.254

    C.192.223.129.0

    D.192.223.129.254


    参考答案：B

  • 第17题：

    When verifying OSPF virtual link problems, which is an important item to check on the two transit OSPF routers?（）

    • A、OSPF process ID
    • B、OSPF router ID
    • C、OSPF network type
    • D、OSPF memory usage
    • E、OSPF CPU utilization
    • F、OSPF stub area configurations

    正确答案:B

  • 第18题：

    Why would you make a non-backbone area a stub or not-so-stubby area？（）

    • A、 to aggregate routes learned from the ABR
    • B、 to lower the cost of routes advertised by the ABR
    • C、 to connect a non-contiguous area to the backbone
    • D、 to decrease the size of the link-state database in that area

    正确答案:D

  • 第19题：

    单选题
    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?（）
    A

    data link layer

    B

    application layer

    C

    access layer

    D

    session layer

    E

    network layer


    正确答案： E
    解析： 暂无解析

  • 第20题：

    单选题
    You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. You are in charge of a server that runs Windows Server 2008. The server hasthe Hyper-V server role installed. You create a new virtual machine and perform an installation of WindowsServer 2003 on the virtual machine. You have the virtual machine configured to use the physical networkcard of the host server. You find that you are unable to access network resources from the virtual machine.You have to make sure that the virtual host can connect to the physical network. What action should youperfrom？（）
    A

    In order to make sure that the virtual host can connect to the physical network， the Multipath I/O feature should be enabled on the host server.

    B

    In order to make sure that the virtual host can connect to the physical network， you should perform the installation of the Microsoft Loopback adapter on the virtual machine.

    C

    In order to make sure that the virtual host can connect to the physical network， you should perform the installation of Microsoft Hyper-V Integration Components on the virtual machine.

    D

    In order to make sure that the virtual host can connect to the physical network， you should perform the installation of the Microsoft Loopback adapter on the host server.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    How is the cost of a virtual link in OSPF calculated?（）
    A

    Takes the metric of the outgoing interface.

    B

    Uses the metric that is assigned during configuration.

    C

    Uses the path metric to reach the virtual link neighbor.

    D

    Uses a default of zero unless otherwise specified.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）
    A

    A virtual link to area 0.

    B

    OSPF summarization command.

    C

    default - cost extension to the area command.

    D

    no - summary extension to the area stub comm and.

    E

    None of the other alternatives apply


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Why would you make a non-backbone area a stub or not-so-stubby area？（）
    A

     to aggregate routes learned from the ABR

    B

     to lower the cost of routes advertised by the ABR

    C

     to connect a non-contiguous area to the backbone

    D

     to decrease the size of the link-state database in that area


    正确答案： D
    解析： 暂无解析

相关内容