A. IGMP
B. IGMP snooping
C. PIM - DM
D. DVMRP
E. MOS PF
第1题:
Which tech nology manages multicast traffic at Layer 2 by configuring Layer 2 LAN interfaces dynamically to forward multicast traffic only to those interfaces that want to receive it?()
第2题:
Which two options can be used as traffic descriptors when classifying and marking traffic? ()
第3题:
Which condition must be met to allow a PE router to forward VPN traffic across a LSP in a Layer 3 VPN environment?()
第4题:
What is the function of the no switchport catalyst switch interface configuration command?()
第5题:
What is the most common cause of network congestion?()
第6题:
Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?()
第7题:
During the IPv6 address resolution, a node sends a neighbor solicitation message in order to discover which of these?()
第8题:
aggregation congestion occurring at the core layer where the different distribution layer devices feed traffic to the core-layer switches
speed mismatches when moving from a low-speed LAN environment to a higher speed WAN environment
flapping Ethernet interfaces caused by misconfigured LAN interfaces
flapping serial interfaces caused by misconfigured WAN interfaces
speed mismatches when moving from a high-speed LAN environment to a lower speed WAN environment
第9题:
The Layer 2 multicast address of the destination node
The solicited node multicast address of the destination node
The Layer 2 address of the destination node based on the destination IPv6 address
The IPv6 address of the destination node based on the destination Layer 2 address
第10题:
IGMP
IGMP snooping
PIM - DM
DVMRP
MOS PF
第11题:
ASA supports both stubmulticast routing and PIMmulticast routing. However, you cannot configure bothconcurrently on a single security appliance
When configured for stubmulticast routing, the ASA can act as the Rendezvous Point (RP)
If the ASAdetects IGMPversion1 routers, the ASAwill automatically switch to IGMP version 1 operations.
The ASA supports both PIM-SM and bi-directional PIM
Enabling multicast routing globally on the ASA automatically enables PIM and IGMP on all interfaces
The ASA can be configured for IGMP snooping toconstrain theflooding of multicast traffic by dynamically configuring themulticast traffic to be forwarded only those interfaces associated with hosts requesting themulticast group
第12题:
Before sending traffic, it must first join multicast group 239.1.1.1 by sending an IGMPv2 membership report to the default router on the local subnet.
It must send an IGMPv2 Request to Send packet and then wait for an IGMPv2 Clear to Send packet from the IGMPv2 querier router on the local subnet
It may begin transmitting multicast traffic to the group only when there is no other host transmitting to the group on the local subnet.
It may transmit multicast traffic to the group at any time.
第13题:
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()
第14题:
Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?()
第15题:
Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet?()
第16题:
Which of these is true regarding the configuration and application of port access control lists? ()
第17题:
You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device()
第18题:
Which two statements are true about Internet Group Management Protocol (IGMP) snooping?()
第19题:
What is the purpose of unicast reverse path forwarding?()
第20题:
Layer 1 intercontroller roaming
Layer 2 intercontroller roaming
Layer 3 intercontroller roaming
intracontroller roaming
第21题:
Layer 1 intercontroller roaming
Layer 2 intercontroller roaming
Layer 3 intercontroller roaming
Layer 4 intercontroller roaming
第22题:
It resembles a Layer 2 bridge.
Traffic flow through the IPS resembles traffic flow through a Layer 3 router.
Inline interfaces which have no IP addresses cannot be detected.
Malicious packets that have been detected are allowed to pass through, but all subsequent traffic is blocked.
第23题:
There are three IGMP modes: dense mode, sparse mode, and sparse - dense mode
IGMP is used to register individual hosts with a multicast group
IGMP version 3 enables a multicast receiving host to specify to the router which sources it should forward traffic from
IGMP messages a re IP datagrams with a protocol value of 2, destination address of 224.0.0.2, and a TTL value of 1
IGMP is a multicast routing protocol that makes packet - forwarding decisions independent of other routing protocols such as EIGRP
IGMP snooping ru ns on Layer 3 routers