Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?()A. Layer 1intercontroller roamingB. Layer 2intercontroller roamingC. Layer 3intercontroller roamingD. Layer 4intercontrolle

题目
Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?()

A. Layer 1intercontroller roaming

B. Layer 2intercontroller roaming

C. Layer 3intercontroller roaming

D. Layer 4intercontroller roaming

相似考题

1.When policy － based routing (PBR) is being configured, which three criteria can the set command specify?()A. all interfaces in the path toward the destinationB. all networks in the path toward the destinationC. adjacent next hop router in the path toward the destinationD. all routers in the path toward the destinationE. all interfaces through which the packets can be routedF. type of service and precedence in the IP packets

2.Which of the following is true when considering the Server load-balancing design within the E-Commerce Module of the Enterprise Campus network？（）A、 Routed mode requires the ACE run OSPF or EIGRPB、 Bridged mode switches a packet between the public and the private subnets when it sees itsMAC address as the destinationC、 Two-armed mode will place the SLB inline to the servers， with different client-side and a server-side VLANsD、 One-armed mode， which uses the same VLAN for the client， the ACE， and the servers， requiresa traffic-diversion mechanism to ensure the traffic return from the server passes though the ACE

3.When policy - based routing (PBR) is being configured, which three criteria can the set command specify?（）A、all interfaces in the path toward the destinationB、all networks in the path toward the destinationC、adjacent next hop router in the path toward the destinationD、all routers in the path toward the destinationE、all interfaces through which the packets can be routedF、type of service and precedence in the IP packets

4.Which two of these statements best describe fast secure roaming for the wireless core feature set using autonomous access points？ （Choose two.） （）A、 It is compatible with all wireless clients.B、 It reduces roaming latency through reduced client RF channel scanning enhancements.C、 It reduces roaming latency to targeted times of less than 75ms.D、 Roaming occurs without reauthentication through a centralized RADIUS server.E、 It is enabled through WLSE deployment.

更多“Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?() ”相关问题

  • 第1题：

    Which two statements are true about the relationship between static NAT and proxy ARP? （）(Choose two.)

    • A、It is necessary to forward ARP requests to remote hosts.
    • B、It is necessary when translated traffic belongs to the same subnet as the ingress interface.
    • C、It is not automatic and you must configure it.
    • D、It is enabled by default and you do not need to configure it.

    正确答案:B,C

  • 第2题：

    Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet？（）

    • A、 Layer 1 intercontroller roaming
    • B、 Layer 2 intercontroller roaming
    • C、 Layer 3 intercontroller roaming
    • D、 intracontroller roaming

    正确答案:B

  • 第3题：

    Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs？（）

    • A、 Layer 1 intercontroller roaming
    • B、 Layer 2 intercontroller roaming
    • C、 Layer 3 intercontroller roaming
    • D、 Layer 4 intercontroller roaming

    正确答案:B

  • 第4题：

    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

    • A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
    • B、Use the same virtual LAN ID on each LPAR.
    • C、Set up IP routing through an LPAR on each system.
    • D、Set up an IP firewall through an LPAR on each system.

    正确答案:A

  • 第5题：

    Which two statements are true about the primary address on an interface?（）

    • A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface
    • B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface
    • C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface
    • D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface

    正确答案:A,C

  • 第6题：

    单选题
    Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet？（）
    A

     Layer 1 intercontroller roaming

    B

     Layer 2 intercontroller roaming

    C

     Layer 3 intercontroller roaming

    D

     intracontroller roaming


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    Company.com wishes to use IPAT via IP replacement in a two-node mutual cluster. Each node  has two Ethernet 10/100/1000 adapters. Throughout the planning session，the customer has asked questions about subnet and VLAN requirements for the intended network topology.  Which of the following best describes the network requirements？（）
    A

     The service IP addresses must be on a separate subnet and VLAN.

    B

     The non-service and service IP addresses must be on the same subnet and on the same VLAN.

    C

     All interfaces on a node must be in different subnets. All subnets must be on the same VLAN. 

    D

     One non-service and one service IP address must be on the same logical subnet. All interfaces must be on the same VLAN.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    多选题
    When policy - based routing (PBR) is being configured, which three criteria can the set command specify?（）
    A

    all interfaces in the path toward the destination

    B

    all networks in the path toward the destination

    C

    adjacent next hop router in the path toward the destination

    D

    all routers in the path toward the destination

    E

    all interfaces through which the packets can be routed

    F

    type of service and precedence in the IP packets


    正确答案： F,C
    解析： 暂无解析

  • 第9题：

    多选题
    Which two of these statements best describe fast secure roaming for the wireless core feature set using autonomous access points？ （Choose two.） （）
    A

    It is compatible with all wireless clients.

    B

    It reduces roaming latency through reduced client RF channel scanning enhancements.

    C

    It reduces roaming latency to targeted times of less than 75ms.

    D

    Roaming occurs without reauthentication through a centralized RADIUS server.

    E

    It is enabled through WLSE deployment.


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    多选题
    You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device？（）
    A

    It resembles a Layer 2 bridge.

    B

    Traffic flow through the IPS resembles traffic flow through a Layer 3 router.

    C

    Inline interfaces which have no IP addresses cannot be detected.

    D

    Malicious packets that have been detected are allowed to pass through， but all subsequent traffic is blocked.


    正确答案： A,D
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements are true about the primary address on an interface?（）
    A

    It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.

    B

    You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.

    C

    It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.

    D

    By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.


    正确答案： A,C
    解析： 暂无解析

  • 第12题：

    单选题
    In what situation would the command ip helper-address be required？（Choose the best answer.）（）
    A

    Only when there is a duplicate IP address caused by a combination of static and dynamic IPaddress allocations

    B

    On each router that exists between the client and the server

    C

    Only when a router separates the client from the server

    D

    Only if the DHCP sever issues a DHCPNAK to the initial request

    E

    Only when the client is on the same subnet as the server

    F

    Only when the DHCP pool is out of IP addresses


    正确答案： D
    解析： 暂无解析

  • 第13题：

    You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）

    • A、It burns IP addresses.
    • B、It conserves IP addresses.
    • C、Both the client and the ERX Edge Router have IP addresses.
    • D、The client has an IP address， but the ERX Edge Router uses an unnumbered address.

    正确答案:A,C

  • 第14题：

    You are the network consultant from Cisco.com. Please point out two statements correctly describe an IPS device（）

    • A、It resembles a Layer 2 bridge.
    • B、Traffic flow through the IPS resembles traffic flow through a Layer 3 router.
    • C、Inline interfaces which have no IP addresses cannot be detected.
    • D、Malicious packets that have been detected are allowed to pass through, but all subsequent traffic is blocked.

    正确答案:A,C

  • 第15题：

    A user would like to have a roaming profile configured. Which of the following is necessary when setting up a roaming profile? （）(Select TWO).

    • A、The user must configure the settings.
    • B、Roaming profile must be stored on every client.
    • C、The user must be on a domain.
    • D、Roaming profile has to be stored on a network server.
    • E、The user must have an IP address on their client.

    正确答案:C,D

  • 第16题：

    Which two statements are true about the primary address on an interface?（）

    • A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.
    • B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.
    • C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.
    • D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.

    正确答案:A,C

  • 第17题：

    Company.com wishes to use IPAT via IP replacement in a two-node mutual cluster. Each node  has two Ethernet 10/100/1000 adapters. Throughout the planning session，the customer has asked questions about subnet and VLAN requirements for the intended network topology.  Which of the following best describes the network requirements？（）  

    • A、 The service IP addresses must be on a separate subnet and VLAN.
    • B、 The non-service and service IP addresses must be on the same subnet and on the same VLAN.
    • C、 All interfaces on a node must be in different subnets. All subnets must be on the same VLAN. 
    • D、 One non-service and one service IP address must be on the same logical subnet. All interfaces must be on the same VLAN.

    正确答案:D

  • 第18题：

    单选题
    Which of the following is true when considering the Server load-balancing design within the E-Commerce Module of the Enterprise Campus network？（）
    A

     Routed mode requires the ACE run OSPF or EIGRP

    B

     Bridged mode switches a packet between the public and the private subnets when it sees itsMAC address as the destination

    C

     Two-armed mode will place the SLB inline to the servers， with different client-side and a server-side VLANs

    D

     One-armed mode， which uses the same VLAN for the client， the ACE， and the servers， requiresa traffic-diversion mechanism to ensure the traffic return from the server passes though the ACE


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs?（）
    A

    Layer 1intercontroller roaming

    B

    Layer 2intercontroller roaming

    C

    Layer 3intercontroller roaming

    D

    Layer 4intercontroller roaming


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    Which roaming option will keep them on the same IP subnet when client traffic is being bridged through LAN interfaces on two WLCs？（）
    A

     Layer 1 intercontroller roaming

    B

     Layer 2 intercontroller roaming

    C

     Layer 3 intercontroller roaming

    D

     Layer 4 intercontroller roaming


    正确答案： B
    解析： 暂无解析

  • 第21题：

    多选题
    You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）
    A

    It burns IP addresses.

    B

    It conserves IP addresses.

    C

    Both the client and the ERX Edge Router have IP addresses.

    D

    The client has an IP address， but the ERX Edge Router uses an unnumbered address.


    正确答案： A,D
    解析： 暂无解析

  • 第22题：

    多选题
    Which two statements are true about the primary address on an interface? （）
    A

    It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface

    B

    You use the primary address when you have multiple IP addresses belonging to the same subnet on the same inteface

    C

    It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface

    D

    By default, the primary address on an interface is selected as the nmerically highest local address configured on the interface


    正确答案： B,C
    解析： 暂无解析

  • 第23题：

    多选题
    A user would like to have a roaming profile configured. Which of the following is necessary when setting up a roaming profile? （）(Select TWO).
    A

    The user must configure the settings.

    B

    Roaming profile must be stored on every client.

    C

    The user must be on a domain.

    D

    Roaming profile has to be stored on a network server.

    E

    The user must have an IP address on their client.


    正确答案： A,B
    解析： 暂无解析

相关内容