the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?()A. telnet access does not require a passwordB. natC. no broadcastD. chanage of destination address in the ipv6

题目
the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?()

A. telnet access does not require a password

B. nat

C. no broadcast

D. chanage of destination address in the ipv6 header

E. chanage of source address in the ipv6 header

F. autoconfiguration

相似考题

1.Ipv6 is(71)for "Internet Protocol Version 6"。Ipv6 is the "next generation" protocol design by the IETF to(72)the current version Inernet Protocol, IP Version 4. Most of today's internet uses Ipv4, which is now nearly twenty years old. Ipv4 has been remarkably resilient in spite of its age, but it is beginging to have problems. Most importantly, there is a growing(73)of Ipv4 addresses, which are needed by all new machines added to the Internet. Ipv6 fixs a number of problems in Ipv4, shch as the(74)number of available Ipv4 addresses. It also adds many improvements to Ipv4 in areas such as souting and network autoconfiguration. Ipv6 is expected to gradually replace Ipv4, with the two coexing for a number of years during a transition(75)A.A．shortB．abbreviateC．abbreviationD．initial

2.Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6?()A. Dual stackB. NATC. Flow labelD. Mobile IPE. 6to4 tunnelingF. AnycastG. MBGP

3.What are two reasons a network administrator would use CDP?()A. to verify the type of cable interconnecting two devicesB. to determine the status of network services on a remote deviceC. to obtain VLAN information from directly connected switchesD. to verify Layer 2 connectivity between two devices when Layer 3 failsE. to obtain the IP address of a connected device in order to telnet to the deviceF. to determine the status of the routing protocols between directly connected routers

4.Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? ()A. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.B. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.C. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.D. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.E. IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

更多“the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?() ”相关问题

  • 第1题：

    IPv6 is short for "Internet Protocol Version 6". IPv6 is the "next generation" protocol designed by the IETF to(71) the current version Internet Protocol, IP version 4("IPv4").

    Most of today's internet uses IPv4, which is now more than twenty years old. IPv4 has been(72) resilient in spite of its age, but it is beginning to have problems. Most importantly, there is a growing(73) of IPv4 addresses, which are needed by all new machines added to the Internet. IPv6 fixes a number of problems in IPv4, such as the(74) number of available IPv4 addresses. It also adds many improvements to IPv4 in areas such as routing and network autoconfiguration. IPv6 is expected to gradually replace IPv4, with the two coexisting for a number of years during a transition(75) .

    A．substitution

    B．swap

    C．switchover

    D．replace


    正确答案：D

  • 第2题：

    What are two reasons that a network administrator would use access lists (Choose two.)（）。

    • A、to control vty access into a router
    • B、to control broadcast traffic through a router
    • C、to filter traffic as it passes through a router
    • D、to filter traffic that originates from the router
    • E、to replace passwords as a line of defense against security incursions

    正确答案:A,C

  • 第3题：

    the network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two valid reasons for adopting ipv6 over ipv4?（）

    • A、telnet access does not require a password
    • B、nat
    • C、no broadcast
    • D、chanage of destination address in the ipv6 header
    • E、chanage of source address in the ipv6 header
    • F、autoconfiguration

    正确答案:C,F

  • 第4题：

    Company network is implemting IPv6 into their existing IPv4 netwrok. Which statement is trueabout incorporating IPv6 into an already existing IPv4 network？（）

    • A、Only OSPF version 3 can be utilized for routing IPv4 and IPv6
    • B、IPv4 and IPv6 networks can be routed simultaneously
    • C、IPv6 can be routed using the same routing protocol versions as IPv4
    • D、A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them
    • E、None of the other alternatives apply

    正确答案:B

  • 第5题：

    What are two reasons that a network administrator would use access lists? (Choose two.) （）。

    • A、to control vty access into a router  
    • B、to control broadcast traffic through a router  
    • C、to filter traffic as it passes through a router  
    • D、to filter traffic that originates from the router  
    • E、to replace passwords as a line of defense against security incursions 

    正确答案:A,C

  • 第6题：

    Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）

    • A、Dual stack
    • B、NAT
    • C、Flow label
    • D、Mobile IP
    • E、6to4 tunneling
    • F、Anycast
    • G、MBGP

    正确答案:A,B,E

  • 第7题：

    What are two reasons a network administrator would use CDP?（）

    • A、to verify the type of cable interconnecting two devices
    • B、to determine the status of network services on a remote device
    • C、to obtain VLAN information from directly connected switches
    • D、to verify Layer 2 connectivity between two devices when Layer 3 fails
    • E、to obtain the IP address of a connected device in order to telnet to the device
    • F、to determine the status of the routing protocols between directly connected routers

    正确答案:D,E

  • 第8题：

    多选题
    What are two valid reasons for using IBM Tivoli Access Manager for Enterprise Single Sign-On Graphical Identification and Authentication （GINA）？（）
    A

    A

    B

    B

    C

    C

    D

    D

    E

    E


    正确答案： E,B
    解析： 暂无解析

  • 第9题：

    多选题
    What are two reasons a network administrator would use CDP? （）
    A

    to verify the type of cable interconnecting two devices

    B

    to determine the status of network services on a remote device

    C

    to obtain VLAN information from directly connected switches

    D

    to verify Layer 2 connectivity between two devices when Layer 3 fails

    E

    to obtain the IP address of a connected device in order to telnet to the device

    F

    to determine the status of the routing protocols between directly connected routers


    正确答案： B,A
    解析： 暂无解析

  • 第10题：

    多选题
    Which two statements about DS-Lite are true？（）
    A

    IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.

    B

    Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.

    C

    The LSN performs NAT44 on private IPv4 source addresses.

    D

    DS-Lite does not perform any address translation.


    正确答案： B,A
    解析： 暂无解析

  • 第11题：

    多选题
    As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the device. For what two reasons can this happen?（）
    A

    The data is moving from 10BASE-TX to 100BASE-TX.

    B

    The WAN encapsulation type has changed.

    C

    The data format has changed from analog to digital.

    D

    The source and destination hosts are in the same subnet.

    E

    The source and destination MAC addresses have changed.


    正确答案： E,B
    解析： 暂无解析

  • 第12题：

    多选题
    Your company plans on migrating their network from IPv4 to IPv6 in the near future. Which three techniques can be used to transition from IPv4 to IPv6？（）
    A

    Dual stack

    B

    NAT

    C

    Flow label

    D

    Mobile IP

    E

    6to4 tunneling

    F

    Anycast

    G

    MBGP


    正确答案： G,B
    解析： 暂无解析

  • 第13题：

    The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）

    • A、telnet access does not require a password
    • B、nat
    • C、no broadcast
    • D、chanage of destination address in the ipv6 header
    • E、chanage of source address in the ipv6 header
    • F、autoconfiguration

    正确答案:C,F

  • 第14题：

    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）

    • A、IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
    • B、IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
    • C、Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.
    • D、Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
    • E、IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.

    正确答案:A,C

  • 第15题：

    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）

    • A、 Tunnel IPv6 over IPv4 to connect far-end IPv6 networks
    • B、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible
    • C、 Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible
    • D、 What is the meaning of EUI-64 and how does it work？
    • E、 Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.

    正确答案:A,C,D

  • 第16题：

    As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the devicE.For what two reasons can this happen? （）

    • A、The data is moving from 10BASE-TX to 100BASE-TX.
    • B、The WAN encapsulation type has changed.
    • C、The data format has changed from analog to digital.
    • D、The source and destination hosts are in the same subnet.
    • E、The source and destination MAC addresses have changed.

    正确答案:B,D

  • 第17题：

    Which two statements about DS-Lite are true？（）

    • A、IPv4 packets are carried over IPv6 tunnels to the LSN while IPv6 traffic is forwarded natively.
    • B、Ipv6 packets are carried over IPv4 tunnels to the LSN while IPv4 traffic is forwards natively.
    • C、The LSN performs NAT44 on private IPv4 source addresses.
    • D、DS-Lite does not perform any address translation.

    正确答案:A,C

  • 第18题：

    What are two reasons a network administrator would use CDP (Choose two.)（）。

    • A、to verify the type of cable interconnecting two devices
    • B、to determine the status of network services on a remote device
    • C、to obtain VLAN information from directly connected switches
    • D、to verify Layer 2 connectivity between two devices when Layer 3 fails
    • E、to obtain the IP address of a connected device in order to telnet to the device
    • F、to determine the status of the routing protocols between directly connected routers

    正确答案:D,E

  • 第19题：

    多选题
    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？ （）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： C,D
    解析： 暂无解析

  • 第20题：

    多选题
    Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? （）
    A

    IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.

    B

    IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.

    C

    Hosts can be  configured to receive both IPv4 and IPv6 addresses via DHCP.

    D

    Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.

    E

    IPv4 and IPv6 addresses c an be simultaneously assigned to a host but not to a router interface.


    正确答案： C,A
    解析： 暂无解析

  • 第21题：

    多选题
    The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）
    A

    telnet access does not require a password

    B

    nat

    C

    no broadcast

    D

    chanage of destination address in the ipv6 header

    E

    chanage of source address in the ipv6 header

    F

    autoconfiguration


    正确答案： D,B
    解析： 暂无解析

  • 第22题：

    多选题
    Your company is researching a new application that runs over IPv6， but part of it must still have IPv4 support. Your company uses a traditional IPv4 network. Your plan is not to run IPv6 over the whole network， but to segment parts of the network or even to operate simultaneously with IPv6 and IPv4. You must make a brief presentation about IPv6 technology to the board of technical directors. Which three of these items could be part of your presentation？（）
    A

    Tunnel IPv6 over IPv4 to connect far-end IPv6 networks.

    B

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible.

    C

    Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible.

    D

    What is the meaning of EUI-64 and how does it work？

    E

    Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    多选题
    What are two reasons a network administrator would use CDP (Choose two.)（）。
    A

    to verify the type of cable interconnecting two devices

    B

    to determine the status of network services on a remote device

    C

    to obtain VLAN information from directly connected switches

    D

    to verify Layer 2 connectivity between two devices when Layer 3 fails

    E

    to obtain the IP address of a connected device in order to telnet to the device

    F

    to determine the status of the routing protocols between directly connected routers


    正确答案： C,D
    解析： 暂无解析

相关内容