Which of the following describe the process identifier that is used to run OSPF on a router?()A. It is locally significant.B. It is globally significant.C. It is needed to identify a unique instance of an OSPF database.D. It is an optional parameter requi

题目
Which of the following describe the process identifier that is used to run OSPF on a router?()

A. It is locally significant.

B. It is globally significant.

C. It is needed to identify a unique instance of an OSPF database.

D. It is an optional parameter required only if multiple OSPF processes are running on the router.

E. All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

相似考题

1.Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?()A. area IDsB. process IDsC. router IDsD. hello timers

2.Which of the following settings do not prevent two potential OSPF neighbors from becoming neighbors?()A. The interface used to connect to that neighbor being passive in the OSPF processB. Duplicate OSPF router IDsC. Mismatched dead timersD. IP addr esses of 10.1.1.1/24 and 10.2.2.2/24E. Mismatched OSPF process IDs

3.What is the purpose of the OSPF router ID in a OR／BOR election?()A. It is used with the OSPF priority values to determine which OSPF router will become the DR or BOR in a point-to-point networkB. It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF routerC. It is used with the OSPF priority values to determine which router will become the DR or BOR in a multi access networkD. It is used to determine which interfaces will send Hello packets to neighboring OSPF routers

4.Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?()A. LSRB. LSAckC. LSUD. DDE. Hello

更多“Which of the following describe the process identifier that is used to run OSPF on a router?() ”相关问题

  • 第1题：

    Which command enables OSPF for IPv6?()

    A. router ospf ipv6 process - id

    B. ipv6 ospf process - id

    C. router ospf process - id

    D. ipv6 router ospf process - id


    参考答案：D

  • 第2题：

    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)()。

    A.It is locally significant

    B.It is globally significant

    C.It is needed to identify a unique instance of an OSPF database

    D.It is an optional parameter required only if multiple OSPF processes are running on the router

    E.All routers in the same OSPF area must have the same process ID if they are to exchange routing information


    参考答案：A, C

  • 第3题：

    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。

    • A、It is locally significant
    • B、It is globally significant
    • C、It is needed to identify a unique instance of an OSPF database
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information

    正确答案:A,C

  • 第4题：

    What are two characteristics of the OSPF process identifier?（）

    • A、It is needed to identify a unique instance of an OSPF database.
    • B、It is an optional parameter only necessary if multiple OSPF processes are used.
    • C、It is locally significant.
    • D、It is globally insignificant
    • E、All routers in the same OSPF area must have the same process ID to exchange routing information.

    正确答案:A,C

  • 第5题：

    Which of the following describe the process identifier that is used to run OSPF on a router?（）

    • A、It is logically significant.
    • B、It is globally significant.
    • C、It is needed to identify a unique instance of an OSPF database.
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router.
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

    正确答案:A,C

  • 第6题：

    Which statement describes the process ID that is used to run OSPF on a router ?（）

    • A、It is locally significant and must be the same throughout an area
    • B、It is globally significant and is used to represent the AS number
    • C、It is locally significant and is used to identify an instance of the OSPF database
    • D、It is globally significant and is used to identify OSPF stub areas

    正确答案:C

  • 第7题：

    Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?（）

    • A、LSR
    • B、LSAck
    • C、LSU
    • D、DD
    • E、Hello

    正确答案:C

  • 第8题：

    单选题
    Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR/BDR (designated router / backup designated router) election process?（）
    A

    TK1# show ip ospf interface

    B

    TK1# show ip ospf priority

    C

    TK1# show ospf neighbor detail

    D

    TK1# show ospf processes

    E

    TK1# show ospf neighbor state


    正确答案： E
    解析： 暂无解析

  • 第9题：

    单选题
    Which command enables OSPF for IPv6?（）
    A

    router ospf ipv6 process - id

    B

    ipv6 ospf process - id

    C

    router ospf process - id

    D

    ipv6 router ospf process - id


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Which statement describes the process ID that is used to run OSPF on a router ?（）
    A

    It is locally significant and must be the same throughout an area

    B

    It is globally significant and is used to represent the AS number

    C

    It is locally significant and is used to identify an instance of the OSPF database

    D

    It is globally significant and is used to identify OSPF stub areas


    正确答案： C
    解析： 暂无解析

  • 第11题：

    多选题
    Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）
    A

    Configure a routing process using the command ipv6 router ospf [process-id].

    B

    Add the network statement for the interfaces on which OSPF will run.

    C

    Configure OSPF on the interface that it will run on.

    D

    Use the passive-interface command on the interfaces on which OSPF should not run.

    E

    Enable routing.


    正确答案： D,A
    解析： 暂无解析

  • 第12题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router? （）
    A

    It is locally significant.

    B

    It is globally significant.

    C

    It is needed to identify a unique instance of an OSPF database.

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router.

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information.


    正确答案： E,D
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?()

    A.The loopback addresses are on different subnets

    B.The value of the dead timers on the router are different

    C.Route summarization is enabled on both routers

    D.The process indentifier on router A is different than the process identifier on router B


    参考答案：B

  • 第14题：

    Which command enables OSPF for IPv6?（）

    • A、router ospf ipv6 process - id
    • B、ipv6 ospf process - id
    • C、router ospf process - id
    • D、ipv6 router ospf process - id

    正确答案:D

  • 第15题：

    Which of the following must match for  two directly connected routers running OSPF to establish a neighbor adjacency?（）

    • A、area IDs
    • B、process IDs
    • C、router IDs
    • D、hello timers

    正确答案:A,D

  • 第16题：

    Which of the following is the correct format for /etc/inittab entries（）

    • A、Runlevel：Action：Identifier：Command
    • B、Identifier：Runlevel：Action：Command
    • C、Command：Action：Identifier：Process
    • D、Process：Runlevel：Command：Identifier

    正确答案:B

  • 第17题：

    What is the purpose of the OSPF router ID in a OR/BOR election?（）

    • A、It is used with the OSPF priority values to determine which OSPF router will become the DR or BOR in a point-to-point network
    • B、It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF router
    • C、It is used with the OSPF priority values to determine which router will become the DR or BOR in a multi access network
    • D、It is used to determine which interfaces will send Hello packets to neighboring OSPF routers

    正确答案:C

  • 第18题：

    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）

    • A、Router(config-router)# network 192.168.10.0 0.0.0.255 0
    • B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
    • C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
    • D、Router(config)# router ospf 0
    • E、Router(config)# router ospf 1

    正确答案:B,E

  • 第19题：

    多选题
    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）
    A

    Router(config-router)# network 192.168.10.0 0.0.0.255 0

    B

    Router(config-router)# network 192.168.10.0 0.0.0.255 area 0

    C

    Router(config-router)# network 192.168.10.0 255.255.255.0 area 0

    D

    Router(config)# router ospf 0

    E

    Router(config)# router ospf 1


    正确答案： C,E
    解析： 暂无解析

  • 第20题：

    单选题
    Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?（）
    A

    LSR

    B

    LSAck

    C

    LSU

    D

    DD

    E

    Hello


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following settings do not prevent two potential OSPF neighbors from becoming neighbors?（）
    A

    The interface used to connect to that neighbor being passive in the OSPF process

    B

    Duplicate OSPF router IDs

    C

    Mismatched dead timers

    D

    IP addr esses of 10.1.1.1/24 and 10.2.2.2/24

    E

    Mismatched OSPF process IDs


    正确答案： E
    解析： 暂无解析

  • 第22题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。
    A

    It is locally significant

    B

    It is globally significant

    C

    It is needed to identify a unique instance of an OSPF database

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information


    正确答案： A,C
    解析： 暂无解析

  • 第23题：

    多选题
    Process OSPF 1 is redistributing routes from process OSPF 2. Which of the following methods may be used to set the metrics of the redistributed routes?（）
    A

    Let the metrics default.

    B

    Use each redistributed route's OSPF metric using the redistribute command's metric transparent keywords.

    C

    Set the metric using the default - metric router subcommand.

    D

    Redistribution is not allowed between two OSPF p rocesses.


    正确答案： C,D
    解析： 暂无解析

  • 第24题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two.)（）
    A

    It is locally significant.

    B

    It is globally significant.

    C

    It is needed to identify a unique instance of an OSPF database.

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router.

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information.


    正确答案： D,E
    解析： 暂无解析

相关内容