Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()A. STPB. VTPC. GVRPD. SNMPE. DHCP

题目
Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()

A. STP

B. VTP

C. GVRP

D. SNMP

E. DHCP

相似考题

1.You are an administrator of the Ezonexam switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in the Ezonexam network.However, you need to share the VLAN information across numerous switches. Which of the following would allow you accomplish this?A. STPB. GVRPC. SNMPD. VTPE. DHCPF. None of the above

2.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

3.A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

4.Which of the following steps are necessary in order to add a new VLAN to the Ezonexam switched network? (Select all that apply)A．Create the VLAN.B．Name the VLAN.C．Configure an IP address for the VLAN.D．Add the desired ports to the new VLAN.E．Add the VLAN to the VTP domain.

更多“Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?() ”相关问题

  • 第1题：

    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?

    A. STP

    B. VTP

    C. EIGRP

    D. SNMP

    E. CDP

    F. None of the above


    正确答案：B
    B 解析：Explanation:
    Sybex CCNA Study Guide 4th Edition states on page 359:
    "The basic goals of VLAN Trunking Protocol (VTP) are to manage all configured VLANs across a switched internetwork and to maintain consistency throughout that network. VTP allows an administrator to add, delete, and rename VLANs-information that is then propagated to all other switches in the VTP domain."

    Incorrect Answers:
    A. STP is the Spanning Tree Protocol, used to prevent bridging loops in a LAN.

    C. EIGRP is a routing protocol used to exchange routing information, not VLAN information.

    D. SNMP is the Simple Network Management Protocol, used to provide information to remote network management stations.

    E. CDP is the Cisco Discovery Protocol, which is used to exchange information between Cisco devices. It can only be used between Cisco routers and switches.

  • 第2题：

    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?（）

    • A、STP
    • B、VTP
    • C、EIGRP
    • D、SNMP
    • E、CDP
    • F、None of the above

    正确答案:B

  • 第3题：

    You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）

    • A、STP
    • B、GVRP
    • C、SNMP
    • D、VTP
    • E、DHCP

    正确答案:D

  • 第4题：

    The Company network utilizes the Multiple-instance Spanning Tree protocol in its switched LAN.   Which three statements about the MST protocol （IEEE 802.1S） are true？ （）

    • A、 To verify the MST configuration， the show pending command can be used in MST configuration  mode.
    • B、 When RSTP and MSTP are configured； UplinkFast and BackboneFast must also be enabled.
    • C、 All switches in the same MST region must have the same VLAN-to-instance mapping， but  different configuration revision numbers.
    • D、 All switches in an MST region， except distribution layer switches， should have their priority  lowered from the default value 32768.
    • E、 An MST region is a group of MST switches that appear as a single virtual bridge to adjacent  CST and MST regions.
    • F、 Enabling MST with the "spanning-tree modemst" global configuration command also enables  RSTP.

    正确答案:A,E,F

  • 第5题：

    Which three statements accurately describe layer 2 Ethernet switches?（）

    • A、Microsegmentation decreases the number of collisions on the network.
    • B、if a switch receives a frame for an unkown destination,it uses ARP to resolve the address.
    • C、Spanning Tree Protocol allows switches to automatically share vlan information.
    • D、In a properly functioning network with redundant switched paths,each switched aegment will contain one root bridge with all its ports in the forwarding state.All other switches in that broadcast domain will have only one root port.
    • E、Establishing vlans increases the number of broadcast domains.
    • F、Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3 address information.

    正确答案:A,D,F

  • 第6题：

    Which protocol provides a method of sharing VLAN configuration information between switches?（）

    • A、VTP
    • B、STP
    • C、ISL
    • D、802.1Q
    • E、VLSM

    正确答案:A

  • 第7题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第8题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第9题：

    多选题
    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）
    A

    Create the VLAN.

    B

    Name the VLAN.

    C

    Configure an IP address for the VLAN.

    D

    Add the desired ports to the new VLAN.

    E

    Add the VLAN to the VTP domain.


    正确答案： B,C
    解析： 暂无解析

  • 第10题：

    多选题
    Which statements describe two of the benefits of VLAN Trunking Protocol？（）
    A

    VTP allows routing between VLANs.

    B

    VTP allows a single switch port to carry information to more than one VLAN.

    C

    VTP allows physically redundant links while preventing switching loops.

    D

    VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.

    E

    VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.

    F

    VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.


    正确答案： F,A
    解析： 暂无解析

  • 第11题：

    单选题
    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）
    A

    STP

    B

    VTP

    C

    GVRP

    D

    SNMP

    E

    DHCP


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?（）
    A

    STP

    B

    VTP

    C

    EIGRP

    D

    SNMP

    E

    CDP

    F

    None of the above


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?()

    A. Create the VLAN.

    B. Name the VLAN.

    C. Configure an IP address for the VLAN.

    D. Add the desired ports to the new VLAN.

    E. Add the VLAN to the VTP domain.


    参考答案：A, B, D

  • 第14题：

    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）

    • A、STP
    • B、VTP
    • C、GVRP
    • D、SNMP
    • E、DHCP

    正确答案:B

  • 第15题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）

    • A、Create the VLAN.
    • B、Name the VLAN.
    • C、Configure an IP address for the VLAN.
    • D、Add the desired ports to the new VLAN.
    • E、Add the VLAN to the VTP domain.

    正确答案:A,B,D

  • 第16题：

    Which statements describe two of the benefits of VLAN Trunking Protocol?（）

    • A、VTP allows routing between VLANs.
    • B、VTP allows a single switch port to carry information to more than one VLAN.
    • C、VTP allows physically redundant links while preventing switching loops.
    • D、VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
    • E、VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
    • F、VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.

    正确答案:D,E

  • 第17题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第18题：

    Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）

    • A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.
    • B、As a VTP server， the new switch deleted all VLANs of the network.
    • C、Erasing VLANs increases the VTP configuration revision.
    • D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.

    正确答案:C

  • 第19题：

    Which three statements accurately describe layer 2 Ethernet switches？（）

    • A、Microsegmentation decreases the number of collisions on the network.
    • B、if a switch receives a frame for an unkown destination，it uses ARP to resolve the address.
    • C、Spanning Tree Protocol allows switches to automatically share vlan information.
    • D、In a properly functioning network with redundant switched paths，each swiched aegment will contain oneroot bridge with all its ports in the forwarding state.All other switches in that broadcast domain will haveonly one root port.
    • E、Establishing vlans increases the number of  broadcast domains.
    • F、Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3address information.

    正确答案:A,D,F

  • 第20题：

    单选题
    You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）
    A

    STP

    B

    GVRP

    C

    SNMP

    D

    VTP

    E

    DHCP


    正确答案： D
    解析： 暂无解析

  • 第21题：

    多选题
    Which three statements accurately describe layer 2 Ethernet switches？（）
    A

    Microsegmentation decreases the number of collisions on the network.

    B

    if a switch receives a frame for an unkown destination，it uses ARP to resolve the address.

    C

    Spanning Tree Protocol allows switches to automatically share vlan information.

    D

    In a properly functioning network with redundant switched paths，each swiched aegment will contain oneroot bridge with all its ports in the forwarding state.All other switches in that broadcast domain will haveonly one root port.

    E

    Establishing vlans increases the number of  broadcast domains.

    F

    Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3address information.


    正确答案： E,B
    解析： 暂无解析

  • 第22题：

    多选题
    Which three statements accurately describe layer 2 Ethernet switches?（）
    A

    Microsegmentation decreases the number of collisions on the network.

    B

    if a switch receives a frame for an unkown destination,it uses ARP to resolve the address.

    C

    Spanning Tree Protocol allows switches to automatically share vlan information.

    D

    In a properly functioning network with redundant switched paths,each switched aegment will contain one root bridge with all its ports in the forwarding state.All other switches in that broadcast domain will have only one root port.

    E

    Establishing vlans increases the number of broadcast domains.

    F

    Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3 address information.


    正确答案： F,A
    解析： 暂无解析

  • 第23题：

    多选题
    The Company network utilizes the Multiple-instance Spanning Tree protocol in its switched LAN.   Which three statements about the MST protocol （IEEE 802.1S） are true？ （）
    A

    To verify the MST configuration， the show pending command can be used in MST configuration  mode.

    B

    When RSTP and MSTP are configured； UplinkFast and BackboneFast must also be enabled.

    C

    All switches in the same MST region must have the same VLAN-to-instance mapping， but  different configuration revision numbers.

    D

    All switches in an MST region， except distribution layer switches， should have their priority  lowered from the default value 32768.

    E

    An MST region is a group of MST switches that appear as a single virtual bridge to adjacent  CST and MST regions.

    F

    Enabling MST with the spanning-tree modemst global configuration command also enables  RSTP.


    正确答案： E,C
    解析： 暂无解析

相关内容