Which of the following steps are necessary in order to add a new VLAN to the Ezonexam switched network? (Select all that apply)A．Create the VLAN.B．Name the VLAN.C．Configure an IP address for the VLAN.D．Add the desired ports to the new VLAN.E．Add the VLAN

题目

Which of the following steps are necessary in order to add a new VLAN to the Ezonexam switched network? (Select all that apply)

A．Create the VLAN.

B．Name the VLAN.

C．Configure an IP address for the VLAN.

D．Add the desired ports to the new VLAN.

E．Add the VLAN to the VTP domain.

相似考题

1.You are an administrator of the Ezonexam switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in the Ezonexam network.However, you need to share the VLAN information across numerous switches. Which of the following would allow you accomplish this?A. STPB. GVRPC. SNMPD. VTPE. DHCPF. None of the above

2.A Ezonexam switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?A．The additions will create more collisions domains.B．IP address utilization will be more efficient.C．More bandwidth will be required than was needed previously.D．An additional broadcast domain will be created.E．The possibility that switching loops will occur will increase dramatically.

3.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

4.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

更多“Which of the following steps are necessary in order to add a new VLAN to the Ezonexam switched network? (Select all that apply)A．Create the VLAN.B．Name the VLAN.C．Configure an IP address for the VLAN.D．Add the desired ports to the new VLAN.E．Add the VLAN ”相关问题

  • 第1题：

    A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.

    Which of the conditions below have to be met in order for this to occur? (Choose all that apply).

    A. The switch that will share the VLAN information must be in the VTP Server mode.

    B. The switches must be in the same VTP domain.

    C. The switch that will share the VLAN information must be configured as the root bridge.

    D. The switches must be configured to use the same VTP version.

    E. The switches must be configured to use the same STP version.

    F. The switches must be configured to use the same type of ID tagging.

    G. The switches must be connected over VLAN trunks.


    正确答案：ABFG
    A,B,F,G 解析：Explanation:
    For the VLAN information to pass automatically throughout the network, VTP must be set up correctly. In order for VTP to work, a VTP server is needed, the VLAN's must be in the same VTP domain, and the encapsulation on each end of the trunk must both set to either 802.1Q or ISL.

    Incorrect Answers:
    C. Root bridges and other functions of the Spanning Tree Protocol (STP) have no impact of the VTP configuration.

    D, E. There is only one version of VTP and STP.

  • 第2题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)

    A. The EZONEXAM VLAN must be created.

    B. The desired ports must be added to the new EZONEXAM VLAN.

    C. The EZONEXAM VLAN must be added to all of the domains.

    D. The EZONEXAM VLAN must be named.

    E. An IP address must be configured for the EZONEXAM VLAN.

    F. None of the above. VLAN creations are automatic.


    正确答案：ABD
    A,B,D 解析：Explanation:
    Creating a VLAN is done in 3 steps:
    1. Create the VLAN
    2. Name the VLAN
    3. Assign ports to the VLAN

    From there, other features and functionality can be configured, but these are the only steps that are required for the addition of a VLAN.

    Incorrect Answers:
    C. The VLAN needs only to be added to a single switch, where it can act as a stand-alone VLAN, or it can be transferred to other switches in the network through the use of the VTP protocol.

    E. VLANs operate at layer 2, and although many are configured with a layer 3 IP address, it is not absolutely necessary to do this.

  • 第3题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?()

    A. The TESTKING VLAN must be created.

    B. The desired ports must be added to the new TESTKING VLAN.

    C. The TESTKING VLAN must be added to all of the domains.

    D. The TESTKING VLAN must be named.

    E. An IP address must be configured for the TESTKING VLAN.

    F. None of the above. VLAN creations are automatic.


    参考答案：A, B, D

  • 第4题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?()

    A. Create the VLAN.

    B. Name the VLAN.

    C. Configure an IP address for the VLAN.

    D. Add the desired ports to the new VLAN.

    E. Add the VLAN to the VTP domain.


    参考答案：A, B, D

  • 第5题：

    A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?（）

    A.More collision domains will be created.

    B.IP address utilization will be more efficient.

    C.More bandwidth will be required than was needed previously.

    D.An additional broadcast domain will be created.


    参考答案：D

  • 第6题：

    You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan？（）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the proper IP address space assigned to it for the new VLAN. 
    • D、Verify that the VLAN virtual interface has been correctly created and enabled.

    正确答案:B

  • 第7题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）

    • A、Create the VLAN.
    • B、Name the VLAN.
    • C、Configure an IP address for the VLAN.
    • D、Add the desired ports to the new VLAN.
    • E、Add the VLAN to the VTP domain.

    正确答案:A,B,D

  • 第8题：

    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）

    • A、The VLAN must be created
    • B、The VLAN must be named
    • C、An IP address and subnet mask must be configured for the new VLAN
    • D、The desired ports must be added to the new VLAN
    • E、The VLAN must be added to the existing VTP Domain

    正确答案:A,B,D

  • 第9题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第10题：

    单选题
    You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）
    A

    STP

    B

    GVRP

    C

    SNMP

    D

    VTP

    E

    DHCP


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）
    A

    STP

    B

    VTP

    C

    GVRP

    D

    SNMP

    E

    DHCP


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?（）
    A

    STP

    B

    VTP

    C

    EIGRP

    D

    SNMP

    E

    CDP

    F

    None of the above


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?

    A. STP

    B. VTP

    C. EIGRP

    D. SNMP

    E. CDP

    F. None of the above


    正确答案：B
    B 解析：Explanation:
    Sybex CCNA Study Guide 4th Edition states on page 359:
    "The basic goals of VLAN Trunking Protocol (VTP) are to manage all configured VLANs across a switched internetwork and to maintain consistency throughout that network. VTP allows an administrator to add, delete, and rename VLANs-information that is then propagated to all other switches in the VTP domain."

    Incorrect Answers:
    A. STP is the Spanning Tree Protocol, used to prevent bridging loops in a LAN.

    C. EIGRP is a routing protocol used to exchange routing information, not VLAN information.

    D. SNMP is the Simple Network Management Protocol, used to provide information to remote network management stations.

    E. CDP is the Cisco Discovery Protocol, which is used to exchange information between Cisco devices. It can only be used between Cisco routers and switches.

  • 第14题：

    You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network.Which of the following would allow you accomplish this?（）

    A.STP

    B.GVRP

    C.SNMP

    D.VTP

    E.DHCP


    参考答案：D

  • 第15题：

    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()

    A. The VLAN must be created

    B. The VLAN must be named

    C. An IP address and subnet mask must be configured for the new VLAN

    D. The desired ports must be added to the new VLAN

    E. The VLAN must be added to the existing VTP Domain


    参考答案：A, B, D

  • 第16题：

    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()

    A. STP

    B. VTP

    C. GVRP

    D. SNMP

    E. DHCP


    参考答案：B

  • 第17题：

    Which one of the following protocols allows the information about the configuration of a new VLAN to be distributed across entire switched network?（）

    • A、STP
    • B、VTP
    • C、EIGRP
    • D、SNMP
    • E、CDP
    • F、None of the above

    正确答案:B

  • 第18题：

    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）

    • A、STP
    • B、VTP
    • C、GVRP
    • D、SNMP
    • E、DHCP

    正确答案:B

  • 第19题：

    A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?（）

    • A、More collision domains will be created.
    • B、IP address utilization will be more efficient.
    • C、More bandwidth will be required than was needed previously.
    • D、An additional broadcast domain will be created.

    正确答案:D

  • 第20题：

    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the VLAN was added on all switches with the use of the show vlan command. 
    • C、Verify that the switch is configured to allow for trunking on the switch ports.
    • D、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

    正确答案:B

  • 第21题：

    Which two of the following steps are necessary to configure inter-VLAN routing between multilayer switches？（）

    • A、Configure a dynamic routing protocol.
    • B、Configure SVI interfaces with IP addresses and subnet masks.
    • C、Configure switch ports with network addresses.
    • D、Configure switch ports with the autostate exclude command.
    • E、Document the MAC addresses of the switch ports.

    正确答案:A,B

  • 第22题：

    多选题
    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）
    A

    Create the VLAN.

    B

    Name the VLAN.

    C

    Configure an IP address for the VLAN.

    D

    Add the desired ports to the new VLAN.

    E

    Add the VLAN to the VTP domain.


    正确答案： B,C
    解析： 暂无解析

  • 第23题：

    多选题
    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）
    A

    The VLAN must be created

    B

    The VLAN must be named

    C

    An IP address and subnet mask must be configured for the new VLAN

    D

    The desired ports must be added to the new VLAN

    E

    The VLAN must be added to the existing VTP Domain


    正确答案： C,B
    解析： 暂无解析

相关内容