Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()A.Router(config)#router ospf 1B.Router(config)#router ospf 0C.Router(config)#router ospf area 0D.Router(config-router)#network 192.1

题目
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()

A.Router(config)#router ospf 1

B.Router(config)#router ospf 0

C.Router(config)#router ospf area 0

D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0

E.Router(config-router)#network 192.168.16.0 0.0.0.255 0

F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

相似考题

1.某园区网采用 OSPF路由协议,参与 OSPF的网络地址是 169.111.0.0/16, Cisco路由器的正确配置是 （ ） 。A) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 0.0.0.0 area 0Rounter(config_router)# area o range 169.111.0.0 255.255.0.0B) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 255.255.0.0 area 0Rounter(config-router)# area o range 169.111.0.0 255.255.0.0C) Rounter(config)# router ospf63Rounter(config-router)# network 169.111.0.0 0.0.255.255 area 0Rounter(config_router)# area o range 169.1-11.0.0 255.255.0.0D) Rounter(config)# router ospf63Rounter(config_router)# network 169.111.0.0 0.0.255.255 area 0Rounter(config-router)# area o range 169.111.0.0 0.0.255.255

2.Which OSPF router type summarizes network advertisements from one OSPF area into another?()A.AB.BC.CD.D

3.Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?()A. On the ABR router ospf 10 area 3 stubB. On all Area 3 routers router ospf 10 area 3 stubC. On all Area 3 routers router ospf 10 area 3 stub no - summaryD. On the ABR router ospf 10 area 3 nssaE. On the ABR rou ter ospf 10 area 3 stub no - summary

4.某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16 Cisco路由器的正确配置是A．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0B．Router (config) #router ospf 63 Router (config-router) # network 169.111.0.0 255.255.0.0 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0C．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 255.255.0.0D．Router (config) #router ospf 63 Router (config-router) #network 169.111.0.0 0.0.255.255 area 0 Router (config-router) #area 0 range 169.111.0.0 0.0.255.255

参考答案和解析
参考答案：A, D
更多“Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?() ”相关问题

  • 第1题：

    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）

    • A、172.16.0.1/23
    • B、172.16.1.1/26
    • C、172.16.1.1/24
    • D、172.16.0.255/23
    • E、None of the other answers is correct.

    正确答案:A,D

  • 第2题：

    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。

    • A、It is locally significant
    • B、It is globally significant
    • C、It is needed to identify a unique instance of an OSPF database
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information

    正确答案:A,C

  • 第3题：

    Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）

    • A、Router（config）#router ospf 1
    • B、Router（config）#router ospf 0
    • C、Router（config）#router ospf  area 0
    • D、Router（config-router）#network 192.168.16.0 0.0.0.255 area 0
    • E、Router（config-router）#network 192.168.16.0 0.0.0.255 0
    • F、Router（config-router）#network 192.168.16.0 255.255.255.0 area 0

    正确答案:A,D

  • 第4题：

    Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、Router(config)#router ospf 1
    • B、Router(config)#router ospf 0
    • C、Router(config)#router ospf area 0
    • D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
    • E、Router(config-router)#network 192.168.16.0 0.0.0.255 0
    • F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

    正确答案:A,D

  • 第5题：

    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）

    • A、Router(config-router)# network 192.168.10.0 0.0.0.255 0
    • B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
    • C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
    • D、Router(config)# router ospf 0
    • E、Router(config)# router ospf 1

    正确答案:B,E

  • 第6题：

    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

    • A、The process id is configured improperly
    • B、The OSPF area is configured improperly
    • C、The network wildcard mask is configured improperly
    • D、The network number is configured improperly
    • E、The AS is configured improperly
    • F、The network subnet mask is configuerd improperly

    正确答案:C

  • 第7题：

    多选题
    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）
    A

    Router(config-router)# network 192.168.10.0 0.0.0.255 0

    B

    Router(config-router)# network 192.168.10.0 0.0.0.255 area 0

    C

    Router(config-router)# network 192.168.10.0 255.255.255.0 area 0

    D

    Router(config)# router ospf 0

    E

    Router(config)# router ospf 1


    正确答案： C,E
    解析： 暂无解析

  • 第8题：

    多选题
    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）
    A

    TestKingRouter(config)# router ospf 0

    B

    TestKingRouter(config)# router ospf 1

    C

    TestKingRouter(config)# router ospf area 0

    D

    TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0

    E

    TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0

    F

    TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0


    正确答案： A,D
    解析： 暂无解析

  • 第9题：

    单选题
    什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）
    A

    router ospf area 0 network 10.1.1.0 255.255.255.0 area 0

    B

    router ospf network 10.1.1.0 0.0.0.255

    C

    router ospf 1 network 10.1.1.0 0.0.0.255 area 0

    D

    router ospf area 0 network 10.1.1.0 0.0.0.255 area 0

    E

    router ospf network 10.1.1.0 255.255.255.0 area 0

    F

    router ospf 1 network 10.1.1.0 0.0.0.255


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
    A

    The process id is configured improperly

    B

    The OSPF area is configured improperly

    C

    The network wildcard mask is configured improperly

    D

    The network number is configured improperly

    E

    The AS is configured improperly

    F

    The network subnet mask is configuerd improperly


    正确答案： F
    解析： 暂无解析

  • 第11题：

    多选题
    Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0？（）
    A

    Router（config）#router ospf 1

    B

    Router（config）#router ospf 0

    C

    Router（config）#router ospf  area 0

    D

    Router（config-router）#network 192.168.16.0 0.0.0.255 area 0

    E

    Router（config-router）#network 192.168.16.0 0.0.0.255 0

    F

    Router（config-router）#network 192.168.16.0 255.255.255.0 area 0


    正确答案： B,C
    解析： 暂无解析

  • 第12题：

    多选题
    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）
    A

    Router(config)#router ospf 1

    B

    Router(config)#router ospf 0

    C

    Router(config)#router ospf area 0

    D

    Router(config-router)#network 192.168.16.0 0.0.0.255 area 0

    E

    Router(config-router)#network 192.168.16.0 0.0.0.255 0

    F

    Router(config-router)#network 192.168.16.0 255.255.255.0 area 0


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）

    • A、The AS is not correctly configured
    • B、The network subnet mask is incorrectly configured
    • C、The network wildcard mask is configured incorrectly
    • D、The network number is not correctly configured
    • E、The process id is configured incorrectly
    • F、None of the above

    正确答案:C

  • 第14题：

    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、TestKingRouter(config)# router ospf 0
    • B、TestKingRouter(config)# router ospf 1
    • C、TestKingRouter(config)# router ospf area 0
    • D、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0
    • E、TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0
    • F、TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0

    正确答案:B,E

  • 第15题：

    Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）

    • A、Configure a routing process using the command ipv6 router ospf [process-id].
    • B、Add the network statement for the interfaces on which OSPF will run.
    • C、Configure OSPF on the interface that it will run on.
    • D、Use the passive-interface command on the interfaces on which OSPF should not run.
    • E、Enable routing.

    正确答案:C,E

  • 第16题：

    Which of the following describe the process identifier that is used to run OSPF on a router?（）

    • A、It is logically significant.
    • B、It is globally significant.
    • C、It is needed to identify a unique instance of an OSPF database.
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router.
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

    正确答案:A,C

  • 第17题：

    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

    • A、Router(config)#router ospf 1
    • B、Router(config)#router ospf 0
    • C、Router(config)#router ospf area 0
    • D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
    • E、Router(config-router)#network 192.168.16.0 0.0.0.255 0
    • F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

    正确答案:A,D

  • 第18题：

    什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）

    • A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0
    • B、router ospf network 10.1.1.0 0.0.0.255
    • C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0
    • D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0
    • E、router ospf network 10.1.1.0 255.255.255.0 area 0
    • F、router ospf 1 network 10.1.1.0 0.0.0.255

    正确答案:D

  • 第19题：

    单选题
    某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16，Cisco路由器的正确配置是（　　）。
    A

    Rounter(config)#router ospf 63
    Rounter(config-router)#network 169.111.0.0 0.0.0.0 area 0
    Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0

    B

    Rounter(config)#router ospf 63
    Rounter(config-router)#network 169.111.0.0 255.255.0.0 area 0
    Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0

    C

    Rounter(config)#router ospf 63
    Rounter(config-router)#network 169.111.0.0 0.0.255.255 area 0
    Rounter(config-router)#area 0 range 169.111.0.0 255.255.0.0

    D

    Rounter(config)#router ospf 63
    Rounter(config-router)#network 169.111.0.0 0.0.255.255 area 0
    Rounter(config-router)#area 0 range 169.111.0.0 0.0.255.255


    正确答案： C
    解析：
    在全局配置模式下，使用“router ospf <Process ID>”命令，启动OSPF进程；在路由器的OSPF配置模式下，使用“network ip<子网号> <wildcard-mask> area <区域号>”命令定义参与OSPF的子网地址，或使用“area <区域号> range <子网地址> <子网掩码>”命令定义某一特定范围子网的聚合。由于network命令中的<wildcard-mask>是子网掩码的反码，C项正确。

  • 第20题：

    多选题
    Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0？（）
    A

    Router（config）#router ospf 1

    B

    Router（config）#router ospf 0

    C

    Router（config）#router ospf area 0

    D

    Router（config-router）#network 192.168.16.0 0.0.0.255 area 0

    E

    Router（config-router）#network 192.168.16.0 0.0.0.255 0

    F

    Router（config-router）#network 192.168.16.0 255.255.255.0 area 0


    正确答案： F,D
    解析： 暂无解析

  • 第21题：

    多选题
    Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）
    A

    Configure a routing process using the command ipv6 router ospf [process-id].

    B

    Add the network statement for the interfaces on which OSPF will run.

    C

    Configure OSPF on the interface that it will run on.

    D

    Use the passive-interface command on the interfaces on which OSPF should not run.

    E

    Enable routing.


    正确答案： D,A
    解析： 暂无解析

  • 第22题：

    单选题
    You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?（）
    A

    The process id is configured improperly.

    B

    The OSPF area is configured improperly.

    C

    The network wildcard mask is configured improperly.

    D

    The network number is configured improperly.

    E

    The AS is configured improperly.

    F

    The network subnet mask is configured improperly.

    G

    All of the above are likely problems.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?（）
    A

    172.16.0.1/23

    B

    172.16.1.1/26

    C

    172.16.1.1/24

    D

    172.16.0.255/23

    E

    None of the other answers is correct.


    正确答案： C,B
    解析： 暂无解析

相关内容