Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)()。A.It is locally significantB.It is globally significantC.It is needed to identify a unique instance of an OSPF databaseD.It is an optional paramete

题目
Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)()。

A.It is locally significant

B.It is globally significant

C.It is needed to identify a unique instance of an OSPF database

D.It is an optional parameter required only if multiple OSPF processes are running on the router

E.All routers in the same OSPF area must have the same process ID if they are to exchange routing information

相似考题

1.Which of the following settings do not prevent two potential OSPF neighbors from becoming neighbors?()A. The interface used to connect to that neighbor being passive in the OSPF processB. Duplicate OSPF router IDsC. Mismatched dead timersD. IP addr esses of 10.1.1.1/24 and 10.2.2.2/24E. Mismatched OSPF process IDs

2.Which command enables OSPF for IPv6?()A. router ospf ipv6 process - idB. ipv6 ospf process - idC. router ospf process - idD. ipv6 router ospf process - id

3.Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?()A.The loopback addresses are on different subnetsB.The value of the dead timers on the router are differentC.Route summarization is enabled on both routersD.The process indentifier on router A is different than the process identifier on router B

4.What is the purpose of the OSPF router ID in a OR／BOR election?()A. It is used with the OSPF priority values to determine which OSPF router will become the DR or BOR in a point-to-point networkB. It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF routerC. It is used with the OSPF priority values to determine which router will become the DR or BOR in a multi access networkD. It is used to determine which interfaces will send Hello packets to neighboring OSPF routers

更多“Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)()。 ”相关问题

  • 第1题：

    Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two.)（）

    • A、It is locally significant.
    • B、It is globally significant.
    • C、It is needed to identify a unique instance of an OSPF database.
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router.
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

    正确答案:A,C

  • 第2题：

    In a RSTP implementation, which of the following two link types are used? （）(Choose two.)

    • A、Shared
    • B、Point-to-Point
    • C、Designated
    • D、Multiaccess non-broadcast

    正确答案:A,B

  • 第3题：

    Which of the following must match for  two directly connected routers running OSPF to establish a neighbor adjacency?（）

    • A、area IDs
    • B、process IDs
    • C、router IDs
    • D、hello timers

    正确答案:A,D

  • 第4题：

    Which of the following describe the process identifier that is used to run OSPF on a router?（）

    • A、It is logically significant.
    • B、It is globally significant.
    • C、It is needed to identify a unique instance of an OSPF database.
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router.
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

    正确答案:A,C

  • 第5题：

    Which statement describes the process ID that is used to run OSPF on a router ?（）

    • A、It is locally significant and must be the same throughout an area
    • B、It is globally significant and is used to represent the AS number
    • C、It is locally significant and is used to identify an instance of the OSPF database
    • D、It is globally significant and is used to identify OSPF stub areas

    正确答案:C

  • 第6题：

    Which two of the following actions must an OSPF NSF-capable router execute after a supervisor engine switchover?（） (Choose two.)

    • A、Re-learn the available OSPF neighbors with neighbor relationship restart
    • B、Send the graceful restart message
    • C、Re-acquire the link state database content for the network
    • D、Re-learn the available OSPF neighbors without neighbor relationship restart

    正确答案:C,D

  • 第7题：

    Which of the following utilities are used to choose which programs run at startup？ （）

    • A、SFC
    • B、SETDEBUG
    • C、MSCONFIG
    • D、REGEDIT

    正确答案:C

  • 第8题：

    单选题
    Which command enables OSPF for IPv6?（）
    A

    router ospf ipv6 process - id

    B

    ipv6 ospf process - id

    C

    router ospf process - id

    D

    ipv6 router ospf process - id


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    Which statement describes the process ID that is used to run OSPF on a router ?（）
    A

    It is locally significant and must be the same throughout an area

    B

    It is globally significant and is used to represent the AS number

    C

    It is locally significant and is used to identify an instance of the OSPF database

    D

    It is globally significant and is used to identify OSPF stub areas


    正确答案： C
    解析： 暂无解析

  • 第10题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。
    A

    It is locally significant

    B

    It is globally significant

    C

    It is needed to identify a unique instance of an OSPF database

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information


    正确答案： A,C
    解析： 暂无解析

  • 第11题：

    多选题
    Process OSPF 1 is redistributing routes from process OSPF 2. Which of the following methods may be used to set the metrics of the redistributed routes?（）
    A

    Let the metrics default.

    B

    Use each redistributed route's OSPF metric using the redistribute command's metric transparent keywords.

    C

    Set the metric using the default - metric router subcommand.

    D

    Redistribution is not allowed between two OSPF p rocesses.


    正确答案： C,D
    解析： 暂无解析

  • 第12题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two.)（）
    A

    It is locally significant.

    B

    It is globally significant.

    C

    It is needed to identify a unique instance of an OSPF database.

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router.

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information.


    正确答案： D,E
    解析： 暂无解析

  • 第13题：

    Which command enables OSPF for IPv6?（）

    • A、router ospf ipv6 process - id
    • B、ipv6 ospf process - id
    • C、router ospf process - id
    • D、ipv6 router ospf process - id

    正确答案:D

  • 第14题：

    Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。

    • A、It is locally significant
    • B、It is globally significant
    • C、It is needed to identify a unique instance of an OSPF database
    • D、It is an optional parameter required only if multiple OSPF processes are running on the router
    • E、All routers in the same OSPF area must have the same process ID if they are to exchange routing information

    正确答案:A,C

  • 第15题：

    The OSPF Hello protocol performs which of the following tasks (Choose two.)（）。

    • A、It provides dynamic neighbor discovery.
    • B、It detects unreachable neighbors in 90 second intervals.
    • C、It maintains neighbor relationships.
    • D、It negotiates correctness parameters between neighboring interfaces.
    • E、Ituses timers to elect the router with the fastest links as the designated router.
    • F、It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.

    正确答案:A,C

  • 第16题：

    What is the purpose of the OSPF router ID in a OR/BOR election?（）

    • A、It is used with the OSPF priority values to determine which OSPF router will become the DR or BOR in a point-to-point network
    • B、It is used with the OSPF priority values to determine which interface will be used to form a neighbor relationship with another OSPF router
    • C、It is used with the OSPF priority values to determine which router will become the DR or BOR in a multi access network
    • D、It is used to determine which interfaces will send Hello packets to neighboring OSPF routers

    正确答案:C

  • 第17题：

    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）

    • A、Router(config-router)# network 192.168.10.0 0.0.0.255 0
    • B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
    • C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
    • D、Router(config)# router ospf 0
    • E、Router(config)# router ospf 1

    正确答案:B,E

  • 第18题：

    Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?（）

    • A、LSR
    • B、LSAck
    • C、LSU
    • D、DD
    • E、Hello

    正确答案:C

  • 第19题：

    单选题
    Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?（）
    A

    LSR

    B

    LSAck

    C

    LSU

    D

    DD

    E

    Hello


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Which of the following settings do not prevent two potential OSPF neighbors from becoming neighbors?（）
    A

    The interface used to connect to that neighbor being passive in the OSPF process

    B

    Duplicate OSPF router IDs

    C

    Mismatched dead timers

    D

    IP addr esses of 10.1.1.1/24 and 10.2.2.2/24

    E

    Mismatched OSPF process IDs


    正确答案： E
    解析： 暂无解析

  • 第21题：

    多选题
    The OSPF Hello protocol performs which of the following tasks (Choose two.)（）。
    A

    It provides dynamic neighbor discovery.

    B

    It detects unreachable neighbors in 90 second intervals.

    C

    It maintains neighbor relationships.

    D

    It negotiates correctness parameters between neighboring interfaces.

    E

    Ituses timers to elect the router with the fastest links as the designated router.

    F

    It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    Which two of these steps are minimum requirements to configure OSPFv3 under IPv6？（）
    A

    Configure a routing process using the command ipv6 router ospf [process-id].

    B

    Add the network statement for the interfaces on which OSPF will run.

    C

    Configure OSPF on the interface that it will run on.

    D

    Use the passive-interface command on the interfaces on which OSPF should not run.

    E

    Enable routing.


    正确答案： D,A
    解析： 暂无解析

  • 第23题：

    多选题
    Which of the following describe the process identifier that is used to run OSPF on a router? （）
    A

    It is locally significant.

    B

    It is globally significant.

    C

    It is needed to identify a unique instance of an OSPF database.

    D

    It is an optional parameter required only if multiple OSPF processes are running on the router.

    E

    All routers in the same OSPF area must have the same process ID if they are to exchange routing information.


    正确答案： E,D
    解析： 暂无解析

相关内容