The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the ce

题目

The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider (Choose two.)（）。

A.WAN switch

B.PVC

C.ATM switch

D.multiplexer

E.CSU/DSU

F.modem

相似考题

1.A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back.What is causing the problem?（）A. The host needs to open the telnet port.B. The host needs a route for the translated address.C. The administrator must use a proxy-arp policy for the translated address.D. The administrator must use a security policy, which will allow communication between the zones.

2.You have a computer that runs Windows Vista. You create a virtual private network (VPN) connection between the computer and your company’s network.You notice that while the computer is connected through the VPN connection, users on the company network can access shared folders on the computer.You need to prevent network users from accessing your shared folders when you are connected to the company’s network by using the VPN connection.What should you do?（）A.AB.BC.CD.D

3.A network administrator is designing a Cisco network for a large company. The network must be able to use minimal bandwidth for routing updates, converge quickly, and support VLSM, CIDR, IP and IPX. Which routing protocol will best fit the requirements of this network?（）A. RIP v1B. RIP v2C. IGRPD. OSPFE. EIGRP

4.An administrator wants to be alerted when a network－based attack is underway, but the company policy prohibits blocking or dropping network connections.Which of the following MUST be deployed?()A.IDSB.IPSC.FirewallD.Managed PKI

更多“The network administrator must complete the connection between the RTA of the XYZ Company ”相关问题

  • 第1题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    A.UTP cable

    B.STP cable

    C.coaxial cable

    D.fiber optic cable


    参考答案：D

  • 第2题：

    A network administrator is designing a Cisco network for a large company. The network must be able to use minimal bandwidth for routing updates, converge quickly, and support VLSM, CIDR, IP and IPX. Which routing protocol will best fit the requirements of this network?（）

    • A、RIP v1
    • B、RIP v2
    • C、IGRP
    • D、OSPF
    • E、EIGRP

    正确答案:E

  • 第3题：

    You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. There is a server named S01 that runs Windows Server 2008 and Hyper-V inyour company. Three virtual machines are hosted on S01. According to the requirement of company policy，the virtual machines must not connect to the company network. All of the virtual machines need to beconfigured to connect to each other. You must meet the company policy. Which should you do？（）

    • A、The Connection should be set to Host for the network interface card.
    • B、The Connection should be set to None for the network interface card.
    • C、You should choose the Not connected option for each virtual machine.
    • D、The Enable virtual LAN identification option should be enabled for each virtual machine.

    正确答案:A,D

  • 第4题：

    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）

    • A、CAT3 cable
    • B、Serial cable
    • C、Crossover cable
    • D、Rollover cable

    正确答案:C

  • 第5题：

    You are a network administrator for your company. The company has a main office and a branch office. The branch office has a cable modem connection to the Internet and uses a virtual private network (VPN) connection to access resources on the main office network. The cable modem is connected to a Windows XP Professional computer named Pro1. You configure Internet Connection Sharing (ICS) on Pro1 to allow users in the branch office to use the VPN connection. ICS sets the network adapter to use the IP address 192.168.0.1. Several sales representatives in the branch office use wireless network adapters to share files between their client computers. They need access to the VPN connection to upload sales reports to the main office. You install a wireless network adapter in Pro1 and configure it with the appropriate settings for the wireless LAN. The sales representatives who use the wireless LAN report that they cannot access the VPN connection. However, they are able to connect to resources in the branch office. Users on the wired network do not report any connectivity problems. The sales representatives need to be able to access the VPN. What should you do?（） 

    • A、Configure the wireless network connection on Pro1 so that it has an IP address of 192. 168. 0. 2.
    • B、Disable and then re-enable Internet Connection Sharing (ICS) on Pro1.
    • C、Create a network bridge between the wired and wireless connections on Pro1.  
    • D、Clear the Allow other network users to control or disable the shared Internet connection check box in the advanced properties of the VPN connection.

    正确答案:C

  • 第6题：

    You are the network administrator for Company.You need to connect to Company’s network from your Windows 2000 Professional computer at home.You have a DSL line that is used for Internet connectivity. You create an L2TP virtual private network（VPN） connection and are able to connect successfully to Company’s network. While connected toCompany’s network， you are unable to access the Internet.You want to be able to access the Internet while connected to Company’s network.How should you configure the connection properties？（）

    • A、Configure the DSL connection to use PPTP instead of L2TP. 
    • B、Enable Internet Connection Sharing for the DSL connection properties. 
    • C、CLEAR THE Use default gateway on remote network check box. 
    • D、Clear the Require data encryption check box. 

    正确答案:C

  • 第7题：

    单选题
    A network administrator is designing a Cisco network for a large company. The network must be able to use minimal bandwidth for routing updates, converge quickly, and support VLSM, CIDR, IP and IPX. Which routing protocol will best fit the requirements of this network?（）
    A

    RIP v1

    B

    RIP v2

    C

    IGRP

    D

    OSPF

    E

    EIGRP


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    You are an enterprise administrator for Cer-tech .com. All the servers on the network run Windows Server2008. The network consists of a server called Server01 that runs Microsoft Hyper-V and hosts three virtualmachines. To fulfill a network requirement， you need to configure all of the virtual machines to connect toeach other. However， the company policy states that the virtual machines must not connect to the companynetwork. Which of the following options would you choose to ensure that all the virtual machines connect to eachother and you meet the company policy also？（）
    A

    Enable the Enable virtual LAN identification option for each virtual machine

    B

    Enable the Enable virtual LAN identification option for each virtual machine and then set the connection to Host for the network interface card

    C

    Set the Connection to None for the network interface card

    D

    Select the Not connected option for each virtual machine.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for your company. The network consists of a single Active Directory domain. The domain contains 25 Windows Server 2003 computers and 6，000 Windows XP Professional computers.The written company security policy states that network traffic to Web servers must be audited on a regular basis. A server named Server1 is configured as a Web server on the company’s intranet. You install Network Monitor Tools from a Windows Server 2003 product CD-ROM on Server1.You run Network Monitor on Server1 for three hours. When you stop the network capture， you see that Network Monitor captured over 40，000 frames. As you look at the captured frames， you notice that an extremely large number of TCP connection requests have all come from the 131.107.0.1 IP address.In Network Monitor， you need to view only the frames for network traffic that are captured between Server1 and the 131.107.0.1 IP address.  What should you do？（）
    A

    Create an Address Capture filter for all network traffic between Server1 and the 131.107.0.1 IP address.

    B

    Create a Find Frame Expression filter for network traffic captured between Server1 and the 131.107.0.1 IP address.

    C

    Create an Address Display filter for all network traffic captured between Server1 and the 131.107.0.1 IP address.

    D

    Create a Pattern Match capture trigger for the 131.107.0.1 IP address.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back. What is causing the problem?（）
    A

    The host needs to open the telnet port.

    B

    The host needs a route for the translated address.

    C

    The administrator must use a proxy-arp policy for the translated address.

    D

    The administrator must use a security policy, which will allow communication between the zones.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Company.com has an application that requires a serial connection for Electronic Data  Interchange. What must be done to integrator the serial connection into an HACMP cluster？（）
    A

     Use an RS3232/422 serial Y cable.

    B

     Alter the device settings to 9600 8/n/1 xon/xoff.

    C

     Use a network based terminal server for the serial connection.

    D

     Nothing because HACMP does not support native serial connection fallovers.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    You are a network administrator for your company. The company has a main office and one branch office. The network consists of a single Active Directory domain. All servers run Windows Server 2003.   The company needs to connect the main office network and the branch office network by using Routing and Remote Access servers at each office. The networks will be connected by a VPN connection over the Internet.   The company’s written security policy includes the following requirements for VPN connections over the Internet：  All data must be encrypted with end-to-end encryption.  VPN connection authentication must be at the computer level.   Credential information must not be transmitted over the Internet as part of the authentication process.   You need to configure security for VPN connection between the main office and the branch office. You need to comply with the written security policy.   What should you do？  （）
    A

     Use a PPTP connection with EAP-TLS authentication.

    B

     Use a PPTP connection with MS-CHAP v2 authentication.

    C

     Use an L2TP connection with EAP-TLS authentication.

    D

     Use an L2TP connection with MS-CHAP v2 authentication.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）

    A.

    B.

    C.

    D.


    参考答案：B

  • 第14题：

    The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider (Choose two.)（）。

    • A、WAN switch
    • B、PVC
    • C、ATM switch
    • D、multiplexer
    • E、CSU/DSU
    • F、modem

    正确答案:E,F

  • 第15题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    • A、UTP cable
    • B、STP cable
    • C、coaxial cable
    • D、fiber optic cable

    正确答案:D

  • 第16题：

    An administrator wants to be alerted when a network-based attack is underway, but the company policy prohibits blocking or dropping network connections. Which of the following MUST be deployed?（）

    • A、IDS
    • B、IPS
    • C、Firewall
    • D、Managed PKI

    正确答案:A

  • 第17题：

    You want to connect to your company network from your Windows 2000 Professional computer at home. You have an ISDN line that is used for internet connectivity. You create a VPN connection and are able to connect successfully to the company network. While connected to the company network, you are unable to access the Internet.   What must you do so that you can access the Internet?（）

    • A、Configure the ISDN connection to use SLIP instead of PPP.
    • B、Select the Enable Internet Connection Sharing for this connection check box in the ISDN connection properties.
    • C、Clear the Use default gateway on remote network check box.
    • D、Install and configure the SAP Agent service.

    正确答案:C

  • 第18题：

    You are a systems engineer for your company. Your company has 20，000 users in a large campus environment located in Los Angeles. Each department in the company is located in its own building. Each department has its own IT staff， which is responsible for all network administration within the building.   The company’s network is divided into several IP subnets that are connected to one another by using dedicated routers. Each building on the company’s main campus contains at least one subnet， and possibly up to five subnets. Each building has at least one router. All routers use RIP version 2 （RIPv2） broadcasts.   The company acquires a new business unit located in Denver. The Denver office has 25 users. The network in the Denver office is connected to the network at the main campus by using a leased frame relay connection. The network administrator at the Denver office installs a Windows Server 2003 computer and configures Routing and Remote Access on this server. The network administrator at the Denver office configures this server as a router and implements RIPv2 in Routing and Remote Access.   Later， the Denver administrator reports that his router is not receiving routing table updates from the routers on the main campus network. He must manually add routing entries to the routing table to enable connectivity between the locations. You investigate and discover that the RIPv2 broadcasts are not being received at the Denver office. You also discover that no routing table announcements from the Denver office are being received on the main campus network.  You need to ensure that the network in the Denver office can communicate with the main campus network and can send and receive automatic routing table updates as network conditions change.   What should you do on the router in the Denver office？（）

    • A、 Configure the router to use RIPv1 broadcasts.
    • B、 Configure the router to use auto-static update mode.
    • C、 Add the IP address ranges of the main campus network to the router’s Accept list and Announce list.
    • D、 Add the IP addresses of the main campus routers to the router’s Neighbors list.

    正确答案:D

  • 第19题：

    单选题
    You are the network administrator for your company. The network consists of a single Active Directory domain. All client computers run Windows XP Professional. The company has a large number of sales representatives who need access to the company network when they travel. A Windows 2000 Server computer is configured to allow users to access the network by using a dial-up connection. Several of the sales representatives occasionally travel to rural locations that have telephone lines that use outdated technology. The sales representatives report that when they attempt to establish a dial-up connection in these locations, they receive the following error message: "The server is not responding." They cannot connect to the remote access server or to the company network. Users who travel to urban areas do not report this problem. You investigate and find out that the server is running properly, but the problem persists. The sales representatives need to be able to use the dial-up connection to access the company network. What should you do?（）
    A

    Change the flow control option in the modem properties to Xon / Xoff.

    B

    Disable error correction in the modem's default data connection preferences.

    C

    Adjust the modem's default connection speed to a lower rate. 

    D

    Disable the first-in, first-out (FIFO) receive and transmit buffers on the modem. 


    正确答案： D
    解析： 暂无解析

  • 第20题：

    多选题
    Your network consists of three Active Directory forests. Forest trust relationships exist between all forests. Each forest contains one domain. All domain controllers run Windows Server 2008 R2. Your company has three network administrators. Each network administrator manages a forest and the Group Policy objects （GPOs） within that forest.   You need to create standard GPOs that the network administrators in each forest will use. The GPOs must meet the following requirements：   èThe GPOs must only contain settings for either user configurations or computer configurations. èThe number of GPOs must be minimized.   Which two actions should you perform？（）
    A

    Export the new GPOs to .cab files. Ensure that the .cab files are available to the network administrator  in each forest.

    B

    Create two new GPOs. Configure both GPOs to use the required user configurations and the required  computer configurations.

    C

    Create two new GPOs. Configure one GPO to use the required user configuration. Configure the other GPO to use the required computer configuration.

    D

    Back up the Sysvol folder that is located on the domain controller where the new GPOs were created. Provide the backup to the network administrator in each forest.


    正确答案： B,A
    解析： 暂无解析

  • 第21题：

    多选题
    You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. There is a server named S01 that runs Windows Server 2008 and Hyper-V inyour company. Three virtual machines are hosted on S01. According to the requirement of company policy，the virtual machines must not connect to the company network. All of the virtual machines need to beconfigured to connect to each other. You must meet the company policy. Which should you do？（）
    A

    The Connection should be set to Host for the network interface card.

    B

    The Connection should be set to None for the network interface card.

    C

    You should choose the Not connected option for each virtual machine.

    D

    The Enable virtual LAN identification option should be enabled for each virtual machine.


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    Your company has a server named Server1 that runs Windows Server 2008 and Microsoft Hyper-V. Server1 hosts three virtual machines.  Company policy states that the virtual machines must not connect to the company network.  You need to configure all of the virtual machines to connect to each other. You must meet the company policy.  Which two actions should you perform？（）
    A

    Select the Not connected option for each virtual machine.

    B

    Enable the Enable virtual LAN identification option for each virtual machine.

    C

    Set the Connection to Host for the network interface card.

    D

    Set the Connection to None for the network interface card.


    正确答案： A,C
    解析： 暂无解析

  • 第23题：

    多选题
    The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider (Choose two.)（）。
    A

    WAN switch

    B

    PVC

    C

    ATM switch

    D

    multiplexer

    E

    CSU/DSU

    F

    modem


    正确答案： D,A
    解析： 暂无解析

相关内容