Which protocol provides a method of sharing VLAN configuration information between switches()。A.VTPB.STPC.ISLD.802.1QE.VLSM

题目
Which protocol provides a method of sharing VLAN configuration information between switches()。

A.VTP

B.STP

C.ISL

D.802.1Q

E.VLSM

相似考题

1.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

2.Ezonexam has implemented the use of the Virtual Trunking Protocol (VTP). Which statement below accurately describes a benefit of doing this?A．VTP will allow physically redundant links while preventing switching loopsB．VTP will allow switches to share VLAN configuration informationC．VTP will allow a single port to carry information to more than one VLAND．VTP will allow for routing between VLANsE．None of the above

3.Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()A. STPB. VTPC. GVRPD. SNMPE. DHCP

4.You need to configure two Ezonexam switches to exchange VLAN information. Which protocol provides a method of sharing VLAN configuration information between these two switches?A. STPB. 802.1QC. VLSMD. ISLE. VTPF. HSRPG. None of the above

更多“Which protocol provides a method of sharing VLAN configuration information between switches()。 ”相关问题

  • 第1题：

    Which statement accurately describes a benefit provided by VTP()。

    A.VTP allows routing between VLANs.

    B.VTP allows a single port to carry information to more than one VLAN.

    C.VTP allows physically redundant links while preventing switching loops.

    D.VTP allows switches to share VLAN configuration information.


    参考答案：D

  • 第2题：

    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）

    • A、STP
    • B、VTP
    • C、GVRP
    • D、SNMP
    • E、DHCP

    正确答案:B

  • 第3题：

    You have a trunk link operating between two switches and you’re experiencing problems withframes leaking between the two VLANs. Each switch has identical modules， software revisionsand VLAN configuration information. Spanning tree protocol is disabled on all VLANs. What isprobably causing this problem？（）

    • A、The link is using IEEE 802.1Q protocol
    • B、The link is using IEEE 802.1E protocol
    • C、Spanning tree is disabled
    • D、Not enough information to determine
    • E、The native VLAN information is identical at each end of the link
    • F、The native VLAN information is different at each end of the link

    正确答案:A,F

  • 第4题：

    Which statements describe two of the benefits of VLAN Trunking Protocol?（）

    • A、VTP allows routing between VLANs.
    • B、VTP allows a single switch port to carry information to more than one VLAN.
    • C、VTP allows physically redundant links while preventing switching loops.
    • D、VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
    • E、VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
    • F、VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.

    正确答案:D,E

  • 第5题：

    Which protocol provides a method of sharing VLAN configuration information between switches?（）

    • A、VTP
    • B、STP
    • C、ISL
    • D、802.1Q
    • E、VLSM

    正确答案:A

  • 第6题：

    Which protocol provides a method of sharing VLAN configuration information between two Cisco switch？（）

    • A、VTP
    • B、802.1Q
    • C、RSTP
    • D、STP

    正确答案:A

  • 第7题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）

    • A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
    • B、You must set the same VTP management domain name on both switches.
    • C、You must set all ports on the two switches as access ports.
    • D、You must configure one of the switches as a VTP server.
    • E、You must use a rollover cable to connect the two switches.

    正确答案:B,D

  • 第8题：

    单选题
    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）
    A

    The access link needs to be configured in multiple VLANs.

    B

    The link between the switches is configured in the wrong VLAN.

    C

    The link between the switches needs to be configured as a trunk.

    D

    VTP is not configured to carry VLAN information between the switches.

    E

    Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    正确答案： D
    解析： 暂无解析

  • 第9题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access ports.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： C,E
    解析： 暂无解析

  • 第10题：

    多选题
    Which statements describe two of the benefits of VLAN Trunking Protocol？（）
    A

    VTP allows routing between VLANs.

    B

    VTP allows a single switch port to carry information to more than one VLAN.

    C

    VTP allows physically redundant links while preventing switching loops.

    D

    VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.

    E

    VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.

    F

    VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.


    正确答案： F,A
    解析： 暂无解析

  • 第11题：

    单选题
    What network information do you need when you plan to implement a VLAN-based solution？（）
    A

    default VLAN information for all unused switch ports

    B

    802.1x configuration parameters 

    C

    number of IP subnets needed

    D

    IP routing protocol information


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）
    A

    STP

    B

    VTP

    C

    GVRP

    D

    SNMP

    E

    DHCP


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Feedback refers to any information which provides a report on the result of communication which takes place not only between the listener and the speaker.（）


    正确答案:正确

  • 第14题：

    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）

    • A、A root VTP server
    • B、A trunk port
    • C、VTP priority
    • D、VLAN 1
    • E、None of the other alternatives apply

    正确答案:B,D

  • 第15题：

    Which issue or set of issues does the Lightweight Access Point Protocol （LWAPP） address？（）

    • A、 reduction of processing in wireless controllers
    • B、 distributed approach to authentication， encryption， and policy enforcement
    • C、 provides security by blocking communication between access points and wireless clients
    • D、 access point discovery， information exchange， and configuration

    正确答案:D

  • 第16题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第17题：

    What network information do you need when you plan to implement a VLAN-based solution？（）

    • A、default VLAN information for all unused switch ports
    • B、802.1x configuration parameters 
    • C、number of IP subnets needed
    • D、IP routing protocol information

    正确答案:C

  • 第18题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第19题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第20题：

    单选题
    Which issue or set of issues does the Lightweight Access Point Protocol （LWAPP） address？（）
    A

     reduction of processing in wireless controllers

    B

     distributed approach to authentication， encryption， and policy enforcement

    C

     provides security by blocking communication between access points and wireless clients

    D

     access point discovery， information exchange， and configuration


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Which statement accurately describes a benefit provided by VTP（）。
    A

    VTP allows routing between VLANs.

    B

    VTP allows a single port to carry information to more than one VLAN.

    C

    VTP allows physically redundant links while preventing switching loops.

    D

    VTP allows switches to share VLAN configuration information.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    Which statement accurately describes a benefit provided by VTP?（）
    A

    VTP allows routing between VLANs.

    B

    VTP allows a single port to carry information to more than one VLAN

    C

    VTP allows physically redundant links while preventing switching loops.

    D

    VTP allows switches to share VLAN configuration information.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Which protocol provides a method of sharing VLAN configuration information between two Cisco switch?（）
    A

    VTP

    B

    802.1Q

    C

    RSTP

    D

    STP


    正确答案： B
    解析： 暂无解析

  • 第24题：

    多选题
    You have a trunk link operating between two switches and you’re experiencing problems withframes leaking between the two VLANs. Each switch has identical modules， software revisionsand VLAN configuration information. Spanning tree protocol is disabled on all VLANs. What isprobably causing this problem？（）
    A

    The link is using IEEE 802.1Q protocol

    B

    The link is using IEEE 802.1E protocol

    C

    Spanning tree is disabled

    D

    Not enough information to determine

    E

    The native VLAN information is identical at each end of the link

    F

    The native VLAN information is different at each end of the link


    正确答案： D,C
    解析： 暂无解析

相关内容