Before starting any diesel or gasoline engine, which of the following must be checked?____.
A.Oil level
B.Flow of cooling water
C.Exhaust discharge
D.All of the above
第1题:
Before starting a gasoline engine on a motorboat,you should make sure for safety that ______.
A.The gasoline tank is full
B.The bilges,cabins,etc.are thoroughly ventilated
C.You have fresh water on board
D.Each of the above is followed
第2题:
the gasoline tank is full
the bilges,cabins,etc. are thoroughly ventilated
you have fresh water on board
Each of the above is followed
第3题:
Holding the valve open for a long period
Increasing the starting air pressure used
Opening the stating air valve quickly
Reducing the starting air valve size
第4题:
higher speed required
flywheel-effect
lower starting temperatures
higher compression pressures
第5题:
Oil level
Flow of cooling water
Exhaust discharge
All of the above
第6题:
doing
make
turn
operating
第7题:
hot air
hot boiler water
cylinder water
hot seawater
第8题:
compression must be low for effective spark ignition
compression must be low for required horsepower and torque generation
compression must be low to prevent pre-ignition
compression must be low to have effective pre-ignition
第9题:
inboard diesel engine
outboard diesel engine
outboard gasoline engine
inboard gasoline engine
第10题:
keep all systems in normally running
the main engine is stand-by
shut off the starting air bottle outlet valve
pay attention to the changes of the system parameters
第11题:
open the indicator cocks
supply some CYL Oil to cylinder liner wall with lubricator (only for two stoke diesel engine)
put the fuel handle in the “stop” position
pump up the air bottle
第12题:
a starting system
the starting air
a starting operation
A, B and C
第13题:
check the pyrometer readings
check the crankcase oil level
check the fuel oil strainers
clean the fuel system
第14题:
open the bypass line
cut in the lube oil cooler
pressurize the lube oil system
top off the expansion tank
第15题:
Exhaust temperature
Lube oil level
Lube oil pressure
Water level in the expansion tank
第16题:
Exhaust temperatures
Raw water pressure
Lube oil pressure
Air box pressure
第17题:
tank level
Various filters
Drains
seawater temperature
第18题:
Flywheel inertia
Admission of starting air
The way of the vessel
securing of fuel to the cylinders
第19题:
line up the engine fore restarting with light diesel oil
reposition the fuel injection cam
change the intake and exhaust valve cam positions
place the starting cam in the intermediate position
第20题:
Air filters
Fuel oil strainers
Crank case oil level
Pyrometer readings
第21题:
The coolant temperature must be maintained at 180℃
The thermostatic bypass valves must be manually opened before the engine is started
The pressure cap must be removed while the engine is secured
Electrical power to the heater must be secured before the cooling system is drained
第22题:
noise coming from that air starting valve
continuous operation of the starting air compressor
zero air pressure in the air starting system
overheated starting air pipe to the cylinder head
第23题:
The diesel oil must never be allowed to mix with the heavy fuel
The temperature of the fuel from the pre–heater should be gradually reduced after switching over the three–way valve
The heating steam to the pre-heater should be secured as soon as the diesel fuel passes through the three-way valve
The heating steam must be secured before the diesel oil passes through the three-way valve