多选题Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces？（）Afamily inetBa security zoneCa routing instanceDhost-inbound-traffic

题目
多选题
Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces？（）
A

family inet

B

a security zone

C

a routing instance

D

host-inbound-traffic

相似考题

1.Click the Exhibit button.System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.Referring to the configuration shown in the exhibit, which two statements are true? （）(Choose two.)A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.C. A user can use SSH to interface ge-0/0/0.0.D. A user can use SSH to interface ge-0/0/1.0.

2.At which two levels of the Junos CLI hierarchy is the host－inbound－traffic command configured? ()(Choose two.)A. [edit security idp]B. [edit security zones security-zone trust interfaces ge-0/0/0.0]C. [edit security zones security-zone trust]D. [edit security screen]

3.You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A. [edit security policies from-zone HR to-zone HR]B. [edit security zones functional-zone management protocols]C. [edit security zones protocol-zone HR host-inbound-traffic]D. [edit security zones security-zone HR host-inbound-traffic protocols]

4.You want to create an out－of－band management zone and assign the ge－0／0／0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?()A. set security zones management interfaces ge-0/0/0.0B. set zones functional-zone management interfaces ge-0/0/0.0C. set security zones functional-zone management interfaces ge-0/0/0.0D. set security zones functional-zone out-of-band interfaces ge-0/0/0.0

参考答案和解析
正确答案： C,D
解析： 暂无解析
更多“多选题Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces？（）Afamily inetBa security zoneCa routing instanceDhost-inbound-traffic”相关问题

  • 第1题：

    Referring to the exhibit, you are unable to commit the configuration for the ge－0／0／1 interface. What must you do to commit the configuration?()

    A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.

    B. You must use the rename command to change unit 100 to unit 0.

    C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-0/0/1] hierarchy.

    D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100] hierarchy.


    参考答案：A

  • 第2题：

    Which command sequence shows traffic per queue for an interface?()

    A.show interfaces queue ge-0/0/0

    B.show statistics queue detail

    C.show interfaces ge-0/0/0 statistics extensive

    D.monitor interface ge-0/0/0 queue


    参考答案：A

  • 第3题：

    How is a loopback cleared on interface ge－0／0／0?()

    A.Issue the operational command clear interfaces ge-0/0/0 loopback local.

    B.No command is necessary, the loopback times-out in 5 minutes.

    C.Issue the configuration command clear interfaces ge-0/0/0 loopback, then commit.

    D.Issue the configuration command delete interfaces ge-0/0/0 gigether-options loopback , then commit.


    参考答案：D

  • 第4题：

    Which command sequence shows traffic per queue for an interface?（）

    • A、show interfaces queue ge-0/0/0
    • B、show statistics queue detail
    • C、show interfaces ge-0/0/0 statistics extensive
    • D、monitor interface ge-0/0/0 queue

    正确答案:A

  • 第5题：

    You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）

    • A、[edit security policies from-zone HR to-zone HR]
    • B、[edit security zones functional-zone management protocols]
    • C、[edit security zones protocol-zone HR host-inbound-traffic]
    • D、[edit security zones security-zone HR host-inbound-traffic protocols]

    正确答案:D

  • 第6题：

    You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）

    • A、[edit interfaces]
    • B、[edit security zones]
    • C、[edit system services]
    • D、[edit security interfaces]

    正确答案:B

  • 第7题：

    Which statement describes a security zone?（）

    • A、A security zone can contain one or more interfaces.
    • B、A security zone can contain interfaces in multiple routing instances.
    • C、A security zone must contain two or more interfaces.
    • D、A security zone must contain bridge groups.

    正确答案:A

  • 第8题：

    Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）

    • A、set interfaces ge-0/0/0.0 address 10.1.1.1/24
    • B、set interfaces ge-0/0/0.0 family inet address 10.1.1.1/24
    • C、set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24
    • D、set interfaces ge-0/0/0 address 10.1.1.1/24

    正确答案:B,C

  • 第9题：

    多选题
    Refer to the exhibit.The network administrator requires easy configuration options and minimal routing protocol traffic.Which two options provide adequate routing table information for traffic that passes between the two routers and satisfy the requests of the network administrator?（）
    A

    a dynamic routing procotol on InternetRouter to advertise summarized routers to CentralRouter.

    B

    a dynamic routing procotol on CentralRouter to advertise summarized routers to InternetRouter.

    C

    a static route on InternetRouter to direct traffic that is destined for 172.16.0.0/16 to CentralRouter.

    D

    a dynamic routing procotol on InternetRouter to advertise all routes to CentralRouer.

    E

    a dynamic routing procotol on CentralRouer to advertise all routes to InternetRouter

    F

    a static,default route on CentralRouter that directs traffic to InternetRouter.


    正确答案： D,B
    解析： 暂无解析

  • 第10题：

    多选题
    Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?（）
    A

    set interfaces ge-0/0/0.0 address 10.1.1.1/24

    B

    set interfaces ge-0/0/0.0 family inet address 10.1.1.1/24

    C

    set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24

    D

    set interfaces ge-0/0/0 address 10.1.1.1/24


    正确答案： C,A
    解析： 暂无解析

  • 第11题：

    单选题
    You want to allow all hosts on interface ge-0/0/0.0 to be able to ping the device’s ge-0/0/0.0 IP address.Where do you configure this functionality？（）
    A

    [edit interfaces]

    B

    [edit security zones]

    C

    [edit system services]

    D

    [edit security interfaces]


    正确答案： A
    解析： 暂无解析

  • 第12题：

    多选题
    Click the Exhibit button. System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device. Referring to the configuration shown in the exhibit, which two statements are true? （）(Choose two.)
    A

    A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.

    B

    A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.

    C

    A user can use SSH to interface ge-0/0/0.0.

    D

    A user can use SSH to interface ge-0/0/1.0.


    正确答案： A,C
    解析： 暂无解析

  • 第13题：

    Referring to the exhibit, what are two differences between the active and candidate configurations?()

    A. The ge-0/0/0 interface was added to the candidate configuration.

    B. Area 0 was added to the active configuration.

    C. Area 1 was added to the candidate configuration.

    D. The ge-0/0/0 interface was added to the active configuration.


    参考答案：A, C

  • 第14题：

    In the exhibit, there are four static routes that route traffic through different interfaces.Which interface does the router use if traffic is sent to the 99.0.0.1 destination?()

    A. ge-0/0/1

    B. ge-0/0/2

    C. ge-0/0/3

    D. ge-0/0/4


    参考答案：D

  • 第15题：

    Which command would initiate a loopback on a Gigabit Ethernet interface ge－0／0／0?()

    A.# set interfaces ge-0/0/0 unit 0 loopback

    B.# set interfaces ge-0/0/0 gigether-options loopback

    C.> set interfaces ge-0/0/0 loopback

    D.> loopback ge-0/0/0


    参考答案：B

  • 第16题：

    How is a loopback cleared on interface ge-0/0/0?（）

    • A、Issue the operational command clear interfaces ge-0/0/0 loopback local.
    • B、No command is necessary, the loopback times-out in 5 minutes.
    • C、Issue the configuration command clear interfaces ge-0/0/0 loopback, then commit.
    • D、Issue the configuration command delete interfaces ge-0/0/0 gigether-options loopback , then commit.

    正确答案:D

  • 第17题：

    Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces？（）

    • A、family inet
    • B、a security zone
    • C、a routing instance
    • D、host-inbound-traffic

    正确答案:A,B

  • 第18题：

    At which two levels of the Junos CLI hierarchy is the host-inbound-traffic command configured? （）(Choose two.)

    • A、[edit security idp]
    • B、[edit security zones security-zone trust interfaces ge-0/0/0.0]
    • C、[edit security zones security-zone trust]
    • D、[edit security screen]

    正确答案:B,C

  • 第19题：

    You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?（）

    • A、set security zones management interfaces ge-0/0/0.0
    • B、set zones functional-zone management interfaces ge-0/0/0.0
    • C、set security zones functional-zone management interfaces ge-0/0/0.0
    • D、set security zones functional-zone out-of-band interfaces ge-0/0/0.0

    正确答案:C

  • 第20题：

    Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?（）

    • A、# set interfaces ge-0/0/0 unit 0 loopback
    • B、# set interfaces ge-0/0/0 gigether-options loopback
    • C、> set interfaces ge-0/0/0 loopback
    • D、> loopback ge-0/0/0

    正确答案:B

  • 第21题：

    单选题
    Which statement describes a security zone?（）
    A

    A security zone can contain one or more interfaces.

    B

    A security zone can contain interfaces in multiple routing instances.

    C

    A security zone must contain two or more interfaces.

    D

    A security zone must contain bridge groups.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    多选题
    At which two levels of the Junos CLI hierarchy is the host-inbound-traffic command configured? （）(Choose two.)
    A

    [edit security idp]

    B

    [edit security zones security-zone trust interfaces ge-0/0/0.0]

    C

    [edit security zones security-zone trust]

    D

    [edit security screen]


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    单选题
    In the exhibit, there are four static routes that route traffic through different interfaces.Which interface does the router use if traffic is sent to the 99.0.0.1 destination?（）
    A

    ge-0/0/1

    B

    ge-0/0/2

    C

    ge-0/0/3

    D

    ge-0/0/4


    正确答案： A
    解析： 暂无解析

相关内容