单选题A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will 

题目
单选题
A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）
A

1

B

7

C

15

D

31

相似考题

1.A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server.Which limitation must be considered when planning the system configuration?（）A.A VIO server requires a dedicated LHEA port.B.There is a limit of 32 LPARs per virtual LAN.C.Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.D.Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

2.When doing capacity planning for the Virtual I/O Server，what is the most important  consideration？（）A、The I/O workload needs of the client LPARsB、The processing requirements of the client LPARsC、The memory requirements of the client LPARsD、The virtual Ethernet requirements between client LPARs

3. An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet （IVE） adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.  If this change is made what is the maximum number of logical ports， across both port groups，  that the IVE adapter can provide？ （）A、 4B、 16C、 20D、 32

4.What is the theoretical maximum number of logical ports that a one port of a 2－port 10Gb IVE can provide if no VIO Server is connected to the IVE?()A.2B.4C.8D.16

更多“单选题A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will ”相关问题

  • 第1题：

    A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）

    • A、1
    • B、7
    • C、15
    • D、31

    正确答案:D

  • 第2题：

    A customer is debating whether to use Shared Ethernet versus Virtual Ethernet.  Which of the following best describes a key difference between Shared and Virtual Ethernet？（）

    • A、Shared Ethernet runs on POWER4 systems
    • B、Virtual Ethernet runs on POWER4 systems
    • C、Shared Ethernet requires a Virtual I/O server and Advanced Power Virtualization
    • D、Virtual Ethernet requires a Virtual I/O server and Advanced Power Virtualization

    正确答案:C

  • 第3题：

    A customer has just purchased an 8-core POWER 570 which has two dual port 1 Gbps  Integrated Virtual Ethernet （IVE） adapters. The customer wants to implement queue pairs （QPs） to take advantage of parallel processing of network traffic to its client logical partitions. Assuming that the system is to utilize the IVEs in both CECs，  which configuration will allow a logical partition to utilize the entire eight cores for network traffic processing？（）

    • A、 Set Multiple Core Scaling （MCS） value of the port group to 8 and set multiple core parameter of the client Ethernet adapters to yes.
    • B、 Set Multiple Core Scaling （MCS） value of the port group to 4 and set multiple core parameter of the client Ethernet adapters to yes.
    • C、 Set Multiple Core Scaling （MCS） value of one of the physical port groups to 4 and set multiple core parameter of the client Ethernet adapters to yes.
    • D、 Set Multiple Core Scaling （MCS） value of one of the physical port groups to 8 and set the multiple core parameter of the client Ethernet adapters to yes.

    正确答案:A

  • 第4题：

    What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can provide if no VIO Server is connected to the IVE（）？ 

    • A、2
    • B、4
    • C、8
    • D、16

    正确答案:D

  • 第5题：

    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）

    • A、A VIO server requires a dedicated LHEA port.
    • B、There is a limit of 32 LPARs per virtual LAN.
    • C、Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.
    • D、Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

    正确答案:A

  • 第6题：

    单选题
    A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used. Which of the following fulfills the customer requirements?（）
    A

    Two dual-port PCIe adapters

    B

    A four-port PCIe Ethernet adapter

    C

    Four separate PCIe Ethernet adapters

    D

    Two embedded Integrated Virtual Ethernet adapters (IVE)


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    A customer has a Power 750 with the following: One processor card with 8 cores enabled, and 64GB RAM installed One GX+ adapter with one I/O drawer attached One 4-port 1Gbps IVE adapter PowerVM Standard Edition. They need to add a GX++ adapter and cable it to an I/O drawer. Which of the following must also be ordered?（）
    A

    A second IVE adapter

    B

    A second processor card

    C

    PowerVM Enterprise Edition

    D

    An additional cable-management arm


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet （IVE） adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.  If this change is made what is the maximum number of logical ports， across both port groups，  that the IVE adapter can provide？ （）
    A

     4

    B

     16

    C

     20

    D

     32


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）
    A

    A VIO server requires a dedicated LHEA port.

    B

    There is a limit of 32 LPARs per virtual LAN.

    C

    Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.

    D

    Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A customer is debating whether to use Shared Ethernet versus Virtual Ethernet.  Which of the following best describes a key difference between Shared and Virtual Ethernet？（）
    A

    Shared Ethernet runs on POWER4 systems

    B

    Virtual Ethernet runs on POWER4 systems

    C

    Shared Ethernet requires a Virtual I/O server and Advanced Power Virtualization

    D

    Virtual Ethernet requires a Virtual I/O server and Advanced Power Virtualization


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）
    A

    Create two virtual adapters on the client， each one from a separate Virtual IO Server

    B

    Enable dead gateway detection on the client so that the network traffic can be rerouted

    C

    Have a spare network card on standby in the client in case the Virtual IO Server goes down

    D

    Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two  separate Virtual IO Servers


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A customer has just purchased an 8-core POWER 570 which has two dual port 1 Gbps  Integrated Virtual Ethernet （IVE） adapters. The customer wants to implement queue pairs （QPs） to take advantage of parallel processing of network traffic to its client logical partitions. Assuming that the system is to utilize the IVEs in both CECs，  which configuration will allow a logical partition to utilize the entire eight cores for network traffic processing？（）
    A

     Set Multiple Core Scaling （MCS） value of the port group to 8 and set multiple core parameter of the client Ethernet adapters to yes.

    B

     Set Multiple Core Scaling （MCS） value of the port group to 4 and set multiple core parameter of the client Ethernet adapters to yes.

    C

     Set Multiple Core Scaling （MCS） value of one of the physical port groups to 4 and set multiple core parameter of the client Ethernet adapters to yes.

    D

     Set Multiple Core Scaling （MCS） value of one of the physical port groups to 8 and set the multiple core parameter of the client Ethernet adapters to yes.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used. Which of the following fulfills the customer requirements?（）

    • A、Two dual-port PCIe adapters
    • B、A four-port PCIe Ethernet adapter
    • C、Four separate PCIe Ethernet adapters
    • D、Two embedded Integrated Virtual Ethernet adapters (IVE)

    正确答案:C

  • 第14题：

    When configuring a dual port gigabit Integrated Virtual Ethernet adapter (IVE), what value must be assigned to Multiple Core Scaling (MCS) to enable 8 logical ports in total? （）

    • A、2
    • B、4
    • C、8
    • D、16

    正确答案:A

  • 第15题：

    A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance. Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）

    • A、Order a 2-port 1Gbps Ethernet LAN adapter.
    • B、Order a 2-port 10Gbps Ethernet LAN adapter.
    • C、Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.
    • D、Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.

    正确答案:A

  • 第16题：

    A customer has a Power 750 with the following: One processor card with 8 cores enabled, and 64GB RAM installed One GX+ adapter with one I/O drawer attached; One 4-port 1Gbps IVE adapterPowerVM Standard Edition; They need to add a GX++ adapter and cable it to an I/O drawer. Which of the following must also be ordered?（）

    • A、A second IVE adapter
    • B、A second processor card
    • C、PowerVM Enterprise Edition
    • D、An additional cable-management arm

    正确答案:B

  • 第17题：

    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1. If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?（）

    • A、 4 
    • B、 16 
    • C、 20 
    • D、 32

    正确答案:C

  • 第18题：

    单选题
    A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance.  Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）
    A

    Order a 2-port 1Gbps Ethernet LAN adapter.

    B

    Order a 2-port 10Gbps Ethernet LAN adapter.

    C

    Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.

    D

    Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    When configuring a dual port gigabit Integrated Virtual Ethernet adapter (IVE), what value must be assigned to Multiple Core Scaling (MCS) to enable 8 logical ports in total? （）
    A

    2

    B

    4

    C

    8

    D

    16


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1. If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?（）
    A

     4 

    B

     16 

    C

     20 

    D

     32


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can provide if no VIO Server is connected to the IVE?（）
    A

    2

    B

    4

    C

    8

    D

    16


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）
    A

    Configure a Shared Ethernet Adapter on the Virtual I/O Server.

    B

    Use the same virtual LAN ID on each LPAR.

    C

    Set up IP routing through an LPAR on each system.

    D

    Set up an IP firewall through an LPAR on each system.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    You are an enterprise administrator for Cer-tech .com. All the servers on the network run Windows Server2008. The network consists of a Server that has the Windows Server virtualization role service installed.You create a new virtual machine， installed Windows Server 2008 on it， and configure it to use the physicalnetwork card of the host server. After this installation and configuration the virtual machine， you wereunable to access network resources from the virtual machine. Which of the following options would youchoose to ensure that the virtual host can connect to the physical network？（）
    A

    Install the MS Loopback adapter on the virtual machine.

    B

    Enable the Multipath I/O feature on the host server.

    C

    Install Windows Server virtualization Guest Integration Components on the virtual machine.

    D

    Install the MS Loopback adapter on the host server.

    E

    None of the above


    正确答案： C
    解析： 暂无解析

相关内容