When doing capacity planning for the Virtual I/O Server，what is the most important  consideration？（）A、The I/O workload needs of the client LPARsB、The processing requirements of the client LPARsC、The memory requirements of the client LPARsD、The virtual Eth

第1题：

What is the minimum number of virtual I/O server partitions needed to ensure high availability of the disks when utilizing the Virtual I/O server in a micro-partitioned solution？（）

• A、1
• B、2
• C、3
• D、4

第2题：

A client has bought an IBM System Storage DS8000 and needs to attach a Sun Solaris Host with 2 HBAs via one fabric to 4 I/O ports on the DS8000. The client needs redundant paths to the volumes on the DS8000.  What is the maximum number of volumes that can be used on the Solaris host（）

• A、256
• B、512
• C、1024
• D、2048

第3题：

Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）

• A、Have one VIO server with striped disks for all LPARs
• B、Have one VIO server with mirrored disks for all LPARs
• C、Have two VIO servers with each LPAR accessing both VIO servers
• D、Have two VIO servers with each LPAR accessing a different VIO server

第4题：

Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

• A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
• B、Use the same virtual LAN ID on each LPAR.
• C、Set up IP routing through an LPAR on each system.
• D、Set up an IP firewall through an LPAR on each system.

第5题：

When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?（）

• A、profile
• B、domain map
• C、DHCP server
• D、RADIUS server

第6题：

You are using Microsoft System Center Virtual Machine Manager （VMM） 2008 R2 to perform a  virtual-to-virtual （V2V） conversion. You need to place the virtual machine （VM） on the host server that has the most available disk I/O. Which two actions should you perform？（）

• A、Set the placement goal to Load balancing.
• B、Set the placement goal to Resource maximization.
• C、Set the resource importance of the disk I/O to Very Important.
• D、Set the maximum disk I/O per second for the host reserves to 10000.

第7题：

Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App （OWA）.  In Site2， you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements： .Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joinedcomputers that are connected to the internal network  What should you do？（）

• A、Modify the Exchange virtual directory on the Client Access server in Site1.
• B、Modify the Exchange virtual directory on the Client Access server in Site2.
• C、Modify the OWA virtual directory on the Client Access server in Site1.
• D、Modify the OWA virtual directory on the Client Access server in Site2.

第8题：

Your network contains two Active Directory sites named Site1 and Site2. Only Site1 can be accessed from the Internet. You have an Exchange Server 2010 organization.  You deploy a Client Access server in Site1 and enable Windows Integrated Authentication for OutlookWeb App （OWA）.  In Site2， you deploy a Mailbox server and a Client Access server.  You need to configure the Exchange organization to meet the following requirements： .Allow users to access their mailboxes from the Internet by using OWA  .Prevent authentication prompts from displaying when users connect to OWA by using domain- joined computers that are connected to the internal network  What should you do？（）

• A、Modify the Exchange virtual directory on the Client Access server in Site1.
• B、Modify the Exchange virtual directory on the Client Access server in Site2.
• C、Modify the OWA virtual directory on the Client Access server in Site1.
• D、Modify the OWA virtual directory on the Client Access server in Site2.

第9题：

Your company has an Active Directory Domain Services (AD DS) domain. All server s run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED - V) to support client virtualization requirements. You need to ensure that all MED - V virtual machine (VM) images can be centrally stor ed and are available to all client computers. What should you do?（）

• A、Install and configure IIS on a member server.
• B、Configure a shared folder on a member server.
• C、Create a single workspace for all client computers.
• D、Install and configure Microsoft SQL Se rver 2008 on a member server.

第10题：

第11题：

第12题：

在一个典型的PPPoE组网中，PPPoE Server和PPPoE Client均为MSR路由器，如果希望PPPoE工作在永久在线模式，需要进行以下哪些配置（）。

• A、PPPoE Server上配置：[RTA-virtual-Templatel] pppoe-client dial-bundle-number 1
• B、PPPoE Client上配置：[HG-Dialerl]pppoe-client dial-bundle-numberl
• C、PPPoE Client上配置：[HG-Ethernet0/0]pppoe-client dial-bundle-number 1
• D、PPPoE Server上配置：[RTA-Virtual-Templatel]pppoe-client dial-bundle-numberlidle-timeout65535
• E、PPPoE Server上配置：[RTA-EthernetO/O]pppoe-client dial-bundle-number 1
• F、PPPoE Client上配置：[HG-Dialerl]pppoe-client dial-bundle-numberlidle-timeout O

第13题：

A system administrator has set up a Virtual IO Server to manage three micropartitioned LPARs. Physical disks are attached to the Virtual IO Server which is accessed through Multipath IO.  What should the administrator know about monitoring for error conditions with virtual disks?（）

• A、Both permanent and temporary virtual hardware error messages are logged to each client partition sharing the device.
• B、Both permanent and temporary error messages for virtual hardware are logged at each occurrence on the Virtual IO Server and then propagated to the client partition.
• C、Temporary error messages for virtual hardware are logged at each occurrence on the Virtual  IO Server. Permanent error messages for virtual hardware are stored on the client partition.
• D、Temporary error messages for virtual hardware will not necessarily be propagated to the client partition. Permanent error messages for virtual hardware are only logged once on the Virtual IO Server.

第14题：

What type of configuration can provide the best availability in a Virtual IO Server environment?（）

• A、Provide multiple paths to all resources through 2 or more Virtual IO Servers
• B、Mirror all disk resources on the Virtual IO Server to present to the client LPAR
• C、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
• D、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）

第15题：

Which of the following steps should be done FIRST when deploying a Virtual I/O server on a p5-550， which will host three logical partitions： a NIM server and two application servers？（）

• A、Create and install the NIM server
• B、Create and install the Virtual I/O Server
• C、Create and install the application servers
• D、Activate Advanced POWER Virtualization

第16题：

You are designing a remote administration solution that meets business requirements. You need to specify client or server software that will be required. What should you do？（）

• A、Ensure that all client computers have a graphical Telnet client installed
• B、Ensure that all client computers have the Remote Desktop Connection client software installed
• C、Ensure that all server computers have RCONSOLE installed and that it is configured to start automatically
• D、Ensure that all server computers have Remote Administration （HTML） installed

第17题：

Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements. You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available to all client computers. What should you do?（）

• A、Install and configure IIS on a member server.
• B、Configure a shared folder on a member server.
• C、Create a single workspace for all client computers.
• D、Install and configure Microsoft SQL Server 2008 on a member server.

第18题：

Your network has client computers that run Windows XP.  All users access a custom line-of- business application.   The line-of-business application is not compatible with Windows 7. You are planning to deploy Windows 7.   You have the following requirements：   The application must run on all client computers.   The application executable must reside on each client computer.    You need to manage application compatibility to meet the requirements.   What should you do？（）

• A、Install the application on a Remote Desktop Services server.
• B、Install a shim for the application on each client computer.
• C、Install the Windows Compatibility Evaluator on each client computer.
• D、Virtualize the application by using Microsoft Application Virtualization （App-V）.

第19题：

Companycom wants to use Virtual SCSI disks to boot multiple operating systems from the same disk. How will the volumes appear in the Virtual IO Server and how will the logical volumes appear in the partition?（）

• A、The Virtual SCSI disks are defined as logical volumes in the Virtual IO Server. The logical volumes appear as real devices (hdisks) in the client partitions. 
• B、The Virtual IO adapters are connected to a virtual host bridge. On the Virtual IO Server they are vdisks, on the client partition, the exported disks are visible as virtual disks. 
• C、The Virtual SCSI disks are represented in the ODM as a bus device whose parent is sysplanar0. Logical volumes will be assigned to the Virtual IO Server and virtual disks, vdisks, in the client partition. 
• D、The Virtual IO adapters are represented as adapter devices with the virtual host bridge as their  parent. On the Virtual IO Server they are vdisks attached to vscsi, on the client partition the exported disks are visible as virtual disks.

第20题：

第21题：