单选题A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this pro

题目
单选题
A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）
A

Add or remove the resources in the profile, click 'apply', then 'save'.

B

Add or remove the resources using DLPAR and change the partition profile.

C

Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.

D

Add or remove the resources in the system profile and reboot the managed system.

相似考题

1.An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）A. Processor failureB. Third party memoryC. Disk drive failureD. ESD during the upgradeE. Backplane failure

2. An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

3.On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）A、2 B、3 C、4 D、8

4. A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）A、DLPAR functions are not available for cloned partitionsB、The new partition has the same node number as the original LPARC、Additional filesets need to be reinstalled after the alt_disk_install cloningD、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

更多“单选题A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this pro”相关问题

  • 第1题：

    Company.com wants to reassign a host bus adapter （HBA） from one partition to another to  handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）

    • A、Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
    • B、Take the source partition down and do the DLPAR function on the target partition.
    • C、Assign the card to the required section of the target partition and run cfgmgr.
    • D、Dynamically remove the card from the source and add to target profile then reactivate the target profile.

    正确答案:A

  • 第2题：

    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

    • A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
    • B、Use DLPAR to move resources from the test LPAR to training when training is active
    • C、Install Partition Load Manager to share resources between the test and training environments
    • D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

    正确答案:D

  • 第3题：

    A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console （HMC）. For operational reasons， it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager （IVM） on this Power System？ （）

    • A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
    • B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
    • C、 Delete all the existing LPARs， create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
    • D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created， which will own all system resources.

    正确答案:D

  • 第4题：

    A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）

    • A、Add or remove the resources in the profile, click 'apply', then 'save'.
    • B、Add or remove the resources using DLPAR and change the partition profile.
    • C、Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
    • D、Add or remove the resources in the system profile and reboot the managed system.

    正确答案:B

  • 第5题：

    How can resource allocations for an active partition on a Power 750 be changed immediately and permanently?（）

    • A、Use Capacity on Demand to add the resources.
    • B、Use DLPAR to add the resources and select the 'permanent' option.
    • C、Use DLPAR to add the resources, and change the partition profile.
    • D、Use an Operating System command to permanently request the resources.

    正确答案:C

  • 第6题：

    One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）

    • A、Add an additional virtual swap device to the partition.
    • B、Use DLPAR to dynamically add the required memory to the partition.
    • C、Shut down the partition and redefine its profile with additional memory.
    • D、Change Partition Load Manager parameters to provide the partition with additional memory shares.

    正确答案:C

  • 第7题：

    单选题
    A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）
    A

    Add or remove the resources in the profile, click 'apply', then 'save'.

    B

    Add or remove the resources using DLPAR and change the partition profile.

    C

    Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.

    D

    Add or remove the resources in the system profile and reboot the managed system.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing. What action, or sequence of actions, will immediately and permanently solve this problem?（）
    A

    Add or remove the resources in the profile, click 'apply', then 'save'.

    B

    Add or remove the resources using DLPAR and change the partition profile.

    C

    Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.

    D

    Add or remove the resources in the system profile and reboot the managed system.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    What is the effect of using Capacity on Demand on LPARs configured on a managed system?（）
    A

    It allows dynamic increase of CPU and memory allocation for all LPARs.

    B

    It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' and 'Maximum' partition profile values are equal.

    C

    It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are less than the 'Maximum' values.

    D

    It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are greater than the 'Maximum' values.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    On a Hardware Management Console (HMC) at version 7, an administrator has an LPAR defined with a minimum of 4GB of memory, 6GB desired and a maximum of 16 GB of memory. The administrator wants to go from 5 GB to 8 GB assigned memory for this partition. In order to make the change, what value should the administrator enter into the add processor resources window? （）
    A

    2 

    B

    3 

    C

    4 

    D

    8


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    After making changes to the profile for an LPAR, the administrator asks the operator to bring the LPAR back up into a running state with the new changes. Which of the following is the correct way to do this?（）
    A

    Shutdown and activate the partition profile

    B

    Reboot the partition using the reboot command

    C

    Reboot the partition using the 'shutdown -r' command

    D

    Right click on the partition profile and select the 'apply changes' option


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A customer is evaluating PowerVM capabilities for dynamically allocating resources without rebooting LPARs. Which features of PowerVM support the customer requirement?（）

    • A、CoD and PCI hot-plug
    • B、DLPAR and Active Memory Sharing
    • C、Hot node add and hot node repair
    • D、D.ynamic processor failure and processor instruction retry

    正确答案:B

  • 第14题：

    An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）

    • A、Processor failure
    • B、Third party memory
    • C、Disk drive failure
    • D、ESD during the upgrade
    • E、Backplane failure

    正确答案:B,D

  • 第15题：

    What is the effect of using Capacity on Demand on LPARs configured on a managed system?（）

    • A、It allows dynamic increase of CPU and memory allocation for all LPARs.
    • B、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' and 'Maximum' partition profile values are equal.
    • C、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are less than the 'Maximum' values.
    • D、It allows dynamic increase of CPU and memory allocation for LPARs when the 'Desired' partition profile values are greater than the 'Maximum' values.

    正确答案:C

  • 第16题：

    After making changes to the profile for an LPAR, the administrator asks the operator to bring the LPAR back up into a running state with the new changes. Which of the following is the correct way to do this?（）

    • A、Shutdown and activate the partition profile
    • B、Reboot the partition using the reboot command
    • C、Reboot the partition using the 'shutdown -r' command
    • D、Right click on the partition profile and select the 'apply changes' option

    正确答案:A

  • 第17题：

    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

    • A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
    • B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
    • C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
    • D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

    正确答案:C

  • 第18题：

    单选题
    An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）
    A

    Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 

    B

    Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 

    C

    Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 

    D

    Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
    A

    DLPAR functions are not available for cloned partitions

    B

    The new partition has the same node number as the original LPAR

    C

    Additional filesets need to be reinstalled after the alt_disk_install cloning

    D

    The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）
    A

    Add an additional virtual swap device to the partition.

    B

    Use DLPAR to dynamically add the required memory to the partition.

    C

    Shut down the partition and redefine its profile with additional memory.

    D

    Change Partition Load Manager parameters to provide the partition with additional memory shares.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    How can resource allocations for an active partition on a Power 750 be changed immediately and permanently?（）
    A

    Use Capacity on Demand to add the resources.

    B

    Use DLPAR to add the resources and select the 'permanent' option.

    C

    Use DLPAR to add the resources， and change the partition profile.

    D

    Use an Operating System command to permanently request the resources.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A System p customer is planning to implement virtualization and is concerned about how to respond  to an increased workload and what limitations there are for very small workloads.  Which of the following describes the minimum size for an LPAR and the minimum amount that can be transferred from on LPAR to another（）
    A

    Smallest partition 10% of all available processors， as small as 1% of all available processors may be transferred.

    B

    Smallest partition 10% of a processor， as small 1% of a processor may be transferred.

    C

    Smallest partition one processor， as small 1% of a processor may be transferred.

    D

    Smallest partition one core， as small 10% of a processor may be transferred.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
    A

    In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.

    B

    In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.

    C

    In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.

    D

    In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    Company.com wants to reassign a host bus adapter （HBA） from one partition to another to  handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）
    A

    Use the rmdev command to remove the card from the current partition before doing the DLPAR process.

    B

    Take the source partition down and do the DLPAR function on the target partition.

    C

    Assign the card to the required section of the target partition and run cfgmgr.

    D

    Dynamically remove the card from the source and add to target profile then reactivate the target profile.


    正确答案： D
    解析： 暂无解析

相关内容