The IBM CE will install the card
The card will not be supported by IBM
The AIX device driver should work fine
The customer is correct, there should be no problem
第1题:
Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?()
第2题:
A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?()
第3题:
Companycom is planning for a 64-way p5 595. The plan is to use Virtual IO Servers and micropartitioning. What is the maximum number of partitions they can allocate?()
第4题:
The account team is putting together a very complex solution for the customer. During the solution design phase, many of the customer’s requirements have changed and additional requirements are being identified. What should the pSeries technical specialist do to ensure the greatest possible customer satisfaction?()
第5题:
Which server houses the database partitions in the AIX BCU V2.1? ()
第6题:
Two p5 570 16 way 1.9 MHz machines
One p5 590 32 way 1.65 MHz machines
One p5 595 32 way 1.65 MHz machines
Two p5 570 16 way 1.65 MHz machines
第7题:
LPAR Validation Tool (LVT)
Personal Systems Configurator (PSC)
IBM Configuration for eBusiness (eConfig)
Advanced System Management Interface (ASMI)
第8题:
IBM System p5 570
IBM System p5 575
IBM System p5 590
IBM System p5 595
第9题:
VIO Server
AIX 5.2 ML4
Shared Ethernet Adapter
AIX 5.3 with Advanced Power Virtualization
第10题:
128
254
320
640
第11题:
The p5 595 would allow for COD
The p5 595 includes the Advanced Power Virtualization hardware and software
The p5 595 is priced the same as the p5 590 given the same number/type of CPUs
The p5 595 performance would be equivalent to the p5 590 given the same number/type of CPUs
第12题:
Use lquerypv to read the drive
Use lspv and look at PP Size value
Look on the outside of the drive itself
Use bootinfo to find the LTG on the drive
第13题:
Companycom is considering a large partitioned p5 590 to consolidate several smaller systems in their data center. Due to the complexity of the consolidation, the customer is asking the technical support specialist to give them a report which shows pre order PCI adapter placement and validates them against IBM's recommendations. The concern is that the factory will not install the adapters in the appropriate slots as the customer pre-selected. What IBM tool is available to provide this?()
第14题:
Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?()
第15题:
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?()
第16题:
During the Solution Assurance for a p5 590, Companycom states there is a plan to install OEM Emulex cards in the p5 590. The customer assumes there will be no problem with the plan since IBM resells the Emulex cards. What is the correct response for the customer?()
第17题:
A CD or DVD with installation media
An internal SCSI adapter in the target LPAR
An Ethernet adapter for access to an FTP server
Advanced Power Virtualization feature of the p5 590
第18题:
mksysb
restvg
AIX install CDs
Veritas NetBackup
第19题:
The IBM CE will install the card
The card will not be supported by IBM
The AIX device driver should work fine
The customer is correct, there should be no problem
第20题:
Use eConfig to configure and validate each pSeries and p5 system.
Engage Advanced Technical Support to review any outstanding technical issues.
Confirm with the customer that the solution design meets their requirements.
Perform a Pre-Install Solution Assurance Review to validate required power requirements.
第21题:
POWER5 runs in an SMP mode as default
POWER5 can run in a full system mode the same as the p690
POWER5 can run in full system mode with the purchase of PLM
POWER5 can run in a full system mode, but it is in LPAR mode
第22题:
The IBM CE will install the card
The card will not be supported by IBM
The AIX device driver should work fine
The customer is correct, there should be no problem
第23题:
Enable DHCP server on the HMC
Configure host name and IP address on DNS server
Manually set the IP address of the service processor
Connect a RS-232 cable from the HMC to the service processor
第24题:
A CD or DVD with installation media
An internal SCSI adapter in the target LPAR
An Ethernet adapter for access to an FTP server
Advanced Power Virtualization feature of the p5 590