单选题An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）A On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#B On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_nameC

题目
单选题
An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
A

On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#

B

On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name

C

On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev  rootvg_disk, rmlv rootlv_name

D

On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl  hdisk#, rmdev -dl vscsi#

相似考题

1.The virtual disk hdisk12 has multiple paths. The disk belongs to volume group vg01. The volume group is currently in use.Which command will remove the path connected to vscsi0?()A.rmdev hdsik12 vscsi0rmdev ? hdsik12 ? vscsi0B.rmpath hdisk12 vscsi0rmpath ? hdisk12 ? vscsi0C.chpath hdisk12 vscsi0 -dchpath ? hdisk12 ? vscsi0 -dD.varyoffvg vg01; rmdev hdisk12 vscsi0 varyoffvg vg01; rmdev ? hdisk12 ? vscsi0

2.AnAIXLPARhasbeenreconfiguredtousedirect－attacheddisks.WhatisthebestwaytofullyremoveanddeletetheVirtualIOvolumes?()A.OntheAIXLPAR:rmdev-dlhdisk#,rmdev-dlvscsi#B.OntheVIOServer:rmdev-devrootvg_disk,rmlvrootlv_nameC.OntheAIXLPAR:rmdev-dlhdisk#,rmdev-dlvscsi#OntheVIOServer:rmdev-dev rootvg_disk,rmlvrootlv_nameD.OntheVIOServer:rmdev-devrootvg_disk,rmlvrootlv_nameOntheAIXLPAR:rmdev-dl hdisk#,rmdev-dlvscsi#

3. A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem.  If fcs1 has failed， what is the correct procedure to rectify this problem？ （）A、 Using ’diagmenu’ command， set fcs1 to Defined.B、 Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.C、 Using ’diagmenu’ command， set the fcs1 state to DefinedD、 Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined

4.A system has two configured fibre channel cards, one of which, fsc0, has failed and must be replaced.Which command should an administrator use to remove the card device and attached child devices?()A.rmdev -Rdl fcs0B.rmdev -cdl fcs0C.rmdev -cdl fscsi0D.rmdev -Rdl fscsi0

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）A On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#B On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_nameC”相关问题

  • 第1题：

    Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）

    • A、Use shared memory and semaphores to transfer the data to the TSM LPAR
    • B、Provide gigabit Ethernet adapters in each LPAR and run a crossover cable
    • C、Create a Virtual Ethernet between the production server and the TSM LPARs
    • D、Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs

    正确答案:C

  • 第2题：

    A system has two configured fibre channel cards, one of which, fsc0, has failed and must be replaced. Which command should an administrator use to remove the card device and attached child devices?（）

    • A、rmdev -Rdl fcs0
    • B、rmdev -cdl fcs0
    • C、rmdev -cdl fscsi0
    • D、rmdev -Rdl fscsi0

    正确答案:A

  • 第3题：

    Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）

    • A、Remove the physical Ethernet adapters from the LPARs
    • B、Activate Advanced POWER Virtualization
    • C、Update microcode for the virtual adapters
    • D、Upgrade AIX V5.2 LPAR to AIX V5.3

    正确答案:D

  • 第4题：

    Companycom has successfully established their p5 LPAR environment on a POWER5 p5 590 running AIX 5.2. They are now ready to move to Virtual IO. What would be required to do Virtual IO?（）

    • A、Apply APAR IY62262 to the current AIX 5.2 Maintenance level 04. Virtual IO Server is not required. 
    • B、Purchase Advanced POWER Virtualization software, upgrade to AIX 5.3 maintenance level 1 and apply APAR IY60349. Virtual IO Server is not required. 
    • C、Verify that there are enough resources to add a Virtual IO Server, upgrade to AIX 5.3 with APAR IY60349, create a Virtual IO Server after applying APAR IY62262. 
    • D、Verify that there are enough resources to add a Virtual IO Server, create a Virtual IO Server and apply APAR IY62262, verify that the system is at AIX 5.2 with Maintenance level 04.

    正确答案:C

  • 第5题：

    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）

    • A、Reallocate the Virtual IO Server disks to the user LPAR
    • B、Create a stripe-group within the Virtual IO Server to protect against disk failure
    • C、Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
    • D、Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers

    正确答案:D

  • 第6题：

    Which of the following commands will remove the hardware definition of the tape drive rmt0 from a system？（）

    • A、rm /dev/rmt0
    • B、rmdel -s rmt0
    • C、rmdev -dl rmt0
    • D、tctl -f /dev/rmt0 erase

    正确答案:C

  • 第7题：

    Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this？（）

    • A、Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adapters
    • B、Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cards
    • C、Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after reboot
    • D、Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure

    正确答案:D

  • 第8题：

    单选题
    Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
    A

    Reallocate the Virtual IO Server disks to the user LPAR

    B

    Create a stripe-group within the Virtual IO Server to protect against disk failure

    C

    Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk

    D

    Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    Companycom has successfully established their p5 LPAR environment on a POWER5 p5 590 running AIX 5.2. They are now ready to move to Virtual IO. What would be required to do Virtual IO?（）
    A

    Apply APAR IY62262 to the current AIX 5.2 Maintenance level 04. Virtual IO Server is not required. 

    B

    Purchase Advanced POWER Virtualization software, upgrade to AIX 5.3 maintenance level 1 and apply APAR IY60349. Virtual IO Server is not required. 

    C

    Verify that there are enough resources to add a Virtual IO Server, upgrade to AIX 5.3 with APAR IY60349, create a Virtual IO Server after applying APAR IY62262. 

    D

    Verify that there are enough resources to add a Virtual IO Server, create a Virtual IO Server and apply APAR IY62262, verify that the system is at AIX 5.2 with Maintenance level 04.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    What type of configuration can provide the best availability in a Virtual IO Server environment?（）
    A

    Provide multiple paths to all resources through 2 or more Virtual IO Servers

    B

    Mirror all disk resources on the Virtual IO Server to present to the client LPAR

    C

    Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server

    D

    Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
    A

    On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#

    B

    On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name

    C

    On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev  rootvg_disk, rmlv rootlv_name

    D

    On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl  hdisk#, rmdev -dl vscsi#


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）
    A

    Remove the physical Ethernet adapters from the LPARs

    B

    Activate Advanced POWER Virtualization

    C

    Update microcode for the virtual adapters

    D

    Upgrade AIX V5.2 LPAR to AIX V5.3


    正确答案： A
    解析： 暂无解析

  • 第13题：

    在AIX系统中，将物理卷hdiskl的定义信息从ODM中删除，可采用下列（）命令。

    • A、rmdev-dl hdiskl
    • B、rmdev-1 hdiskl
    • C、rmdev-r hdiskl
    • D、rmdev-d

    正确答案:A

  • 第14题：

    An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）

    • A、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
    • B、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
    • C、On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev  rootvg_disk, rmlv rootlv_name
    • D、On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl  hdisk#, rmdev -dl vscsi#

    正确答案:C

  • 第15题：

    Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）

    • A、VIO Server
    • B、AIX 5.2 ML4
    • C、Shared Ethernet Adapter
    • D、AIX 5.3 with Advanced Power Virtualization

    正确答案:D

  • 第16题：

    A mirrored root disk needs to be replaced. Which of the following commands will clear the boot record on the failing disk？（）

    • A、chpv -c
    • B、rmlv hd5
    • C、bosboot -ad
    • D、rmdev -dl hd5

    正确答案:A

  • 第17题：

    A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different  adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）

    • A、Assign the adapters to a Virtual IO partition
    • B、Use the MPIO function included in AIX 5.2
    • C、Migrate the application to AIX 5.3 and use the MPIO function
    • D、Set up two Virtual IO partitions and attach both partitions to the device

    正确答案:B

  • 第18题：

    Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）

    • A、Assign the adapter to an IO Hosting partition
    • B、Use AIX 5L affinity to move the application from SUSE to AIX
    • C、Use AIX 5.3 drivers to install the adapter in the Linux LPAR
    • D、Assign the adapter to an AIX 5.3 partition running Linux Affinity

    正确答案:A

  • 第19题：

    单选题
    Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this？（）
    A

    Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adapters

    B

    Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cards

    C

    Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after reboot

    D

    Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    A p5 570 customer is currently running AIX 5.3. The customer now wants to add Virtual Ethernet to two of the LPARs. This will enable the application tier can communicate to the database tier without using an external Ethernet card. What is the best way to accomplish this task?（）
    A

    Create a VIO server

    B

    Modify the LPAR profiles to add a Virtual Ethernet adapter

    C

    Buy the Advanced Power Virtualization feature and enter a authorization code at the HMC

    D

    Buy the Advanced Power Virtualization feature and enter a authorization code at the service  processor menu


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem.  If fcs1 has failed， what is the correct procedure to rectify this problem？ （）
    A

     Using ’diagmenu’ command， set fcs1 to Defined.

    B

     Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.

    C

     Using ’diagmenu’ command， set the fcs1 state to Defined

    D

     Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Companycom has a p5 590 that has their production LPAR, their Tivoli Storage Manager (TSM) LPAR, and several other LPARs. What method would provide connectivity between the production LPAR, and the TSM LPAR, but be isolated from the other LPARs in the system without utilizing a Virtual IO Server or physical adapter resources?（）
    A

    Use shared memory and semaphores to transfer the data to the TSM LPAR

    B

    Provide gigabit Ethernet adapters in each LPAR and run a crossover cable

    C

    Create a Virtual Ethernet between the production server and the TSM LPARs

    D

    Create a Virtual Ethernet between the TSM server LPAR and the non-production LPARs


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A system administrator has a pSeries p5-520 2-way with AIX 5L V5.2 with a peak utilization of 50%. There is a request to add a new Web server for a small department. Which of the following solutions is the best fit for this environment？（）
    A

    Create a dedicated LPAR for the existing workload and a Micro-Partition for the Web server. 

    B

    Create a dedicated LPAR for the existing workload and a dedicated LPAR for the Web server.

    C

    Create a Micro-Partition for the existing workload and a dedicated LPAR for the Web server.

    D

    Create a Micro-Partition for the existing workload and a Micro-Partition for the Web server.


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）
    A

    Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive 

    B

    Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server 

    C

    Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition 

    D

    3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution


    正确答案： D
    解析： 暂无解析

相关内容