单选题Which command at the [edit protocols isis] hierarchy level forces routed traffic to avoid this router?（）A metric 64B overloadC priority 0D te-metric 32768

题目
单选题
Which command at the [edit protocols isis] hierarchy level forces routed traffic to avoid this router?（）
A

metric 64

B

overload

C

priority 0

D

te-metric 32768

相似考题

1.At which two levels of the Junos CLI hierarchy is the host－inbound－traffic command configured? ()(Choose two.)A. [edit security idp]B. [edit security zones security-zone trust interfaces ge-0/0/0.0]C. [edit security zones security-zone trust]D. [edit security screen]

2.You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）A. [edit security policies from-zone HR to-zone HR]B. [edit security zones functional-zone management protocols]C. [edit security zones protocol-zone HR host-inbound-traffic]D. [edit security zones security-zone HR host-inbound-traffic protocols]

3.An IS-IS router is adjacent to and passing traffic with a neighbor. You perform a show isis interface detail command and notice that for some interfaces you have a circuit type of 3. Which IS-IS level(s) is enabled on these interfaces?（）A. Level 1 onlyB. Level 2 onlyC. Level 1 and Level 2D. Level 3 only

4.Under which Junos hierarchy level are security policies configured?()A. [edit security]B. [edit protocols]C. [edit firewall]D. [edit policy-options]

更多“单选题Which command at the [edit protocols isis] hierarchy level forces routed traffic to avoid this router?（）A metric 64B overloadC priority 0D te-metric 32768”相关问题

  • 第1题：

    Which command at the [edit protocols isis] hierarchy level forces routed traffic to avoid this router?()

    A. metric 64

    B. overload

    C. priority 0

    D. te-metric 32768


    参考答案：B

  • 第2题：

    What are the basic configuration steps to enable IS － IS?()

    A. Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command.

    B. Configure the net sy stem - id and the network net - id commands under routerisis.

    C. Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command.

    D. Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis.

    E. Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.


    参考答案：A

  • 第3题：

    At which command prompt would you issue the set date command?（）

    • A、[edit chassis]   user@router#
    • B、[edit]   user@router#
    • C、[edit system]   user@router#
    • D、user@router>

    正确答案:D

  • 第4题：

    In which hierarchy are routing policies defined?（）

    • A、[edit policy-options]
    • B、[edit routing-options]
    • C、[edit forwarding-options]
    • D、[edit protocols]

    正确答案:A

  • 第5题：

    You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?（）

    • A、[edit protocols bgp group external]    user@router# set interfaces ge-0/0/0.42 ?
    • B、[edit protocols bgp group external]    user@router# edit show interfaces ge-0/0/0.42
    • C、[edit protocols bgp group external]    user@router# top show interfaces ge-0/0/0.42
    • D、[edit protocols bgp group external]    user@router# show interfaces ge0/0/0.42

    正确答案:C

  • 第6题：

    Which command at the [edit protocols isis] hierarchy level forces routed traffic to avoid this router？（）

    • A、metric 64
    • B、overload
    • C、priority 0
    • D、te-metric 32768

    正确答案:B

  • 第7题：

    单选题
    Which CLI command shows if the router has formed any IS-IS adjacencies?（）
    A

    show clns neighbor

    B

    show isis neighbor

    C

    show clns adjacency

    D

    show isis adjacency


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Under which Junos hierarchy level are security policies configured?（）
    A

    [edit security]

    B

    [edit protocols]

    C

    [edit firewall]

    D

    [edit policy-options]


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    At which command prompt would you issue the set date command?（）
    A

    [edit chassis]   user@router#

    B

    [edit]   user@router#

    C

    [edit system]   user@router#

    D

    user@router>


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You want to allow your device to establish OSPF adjacencies with a neighboring device connected to interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic?（）
    A

    [edit security policies from-zone HR to-zone HR]

    B

    [edit security zones functional-zone management protocols]

    C

    [edit security zones protocol-zone HR host-inbound-traffic]

    D

    [edit security zones security-zone HR host-inbound-traffic protocols]


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    What are the basic configuration steps to enable IS - IS?（）
    A

    Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command.

    B

    Configure the net sy stem - id and the network net - id commands under routerisis.

    C

    Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command.

    D

    Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis.

    E

    Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    In JUNOS software， which command is used to configure TED support for OSPF？（）
    A

    set protocols rsvp cspf-enable

    B

    set protocols mpls cspf-enable

    C

    set protocols rsvp traffic-engineering

    D

    set protocols ospf traffic-engineering


    正确答案： D
    解析： 暂无解析

  • 第13题：

    In which hierarchy are routing policies defined?()

    A. [edit policy-options]

    B. [edit routing-options]

    C. [edit forwarding-options]

    D. [edit protocols]


    参考答案：A

  • 第14题：

    An IS-IS router is adjacent to and passing traffic with a neighbor. You perform a show isis interface detail command and notice that for some interfaces you have a circuit type of 3. Which IS-IS level(s) is enabled on these interfaces?（）

    • A、Level 1 only
    • B、Level 2 only
    • C、Level 1 and Level 2
    • D、Level 3 only

    正确答案:C

  • 第15题：

    You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）

    • A、[edit security policies from-zone HR to-zone HR]
    • B、[edit security zones functional-zone management protocols]
    • C、[edit security zones protocol-zone HR host-inbound-traffic]
    • D、[edit security zones security-zone HR host-inbound-traffic protocols]

    正确答案:D

  • 第16题：

    At which two levels of the Junos CLI hierarchy is the host-inbound-traffic command configured? （）(Choose two.)

    • A、[edit security idp]
    • B、[edit security zones security-zone trust interfaces ge-0/0/0.0]
    • C、[edit security zones security-zone trust]
    • D、[edit security screen]

    正确答案:B,C

  • 第17题：

    An IS-IS router is adjacent to and passing traffic with a neighbor. You perform a show is interface detail command and notice that for some interfaces you have a circuit type of 3. Which IS-IS level（s） is enabled on these interfaces？（）

    • A、Level 1 only
    • B、Level 2 only
    • C、Level 1 and Level 2
    • D、Level 3 only

    正确答案:C

  • 第18题：

    Under which Junos hierarchy level are security policies configured?（）

    • A、[edit security]
    • B、[edit protocols]
    • C、[edit firewall]
    • D、[edit policy-options]

    正确答案:A

  • 第19题：

    单选题
    In which hierarchy are routing policies defined?（）
    A

    [edit policy-options]

    B

    [edit routing-options]

    C

    [edit forwarding-options]

    D

    [edit protocols]


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Which CLI command displays the IS-IS level used by each interface?（）
    A

    show clns neighbor

    B

    show isis neighbor

    C

    show clns interface

    D

    show isis interface


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    At which two levels of the Junos CLI hierarchy is the host-inbound-traffic command configured? （）(Choose two.)
    A

    [edit security idp]

    B

    [edit security zones security-zone trust interfaces ge-0/0/0.0]

    C

    [edit security zones security-zone trust]

    D

    [edit security screen]


    正确答案： B,D
    解析： 暂无解析

  • 第22题：

    单选题
    An IS-IS router is adjacent to and passing traffic with a neighbor. You perform a show isis interface detail command and notice that for some interfaces you have a circuit type of 3. Which IS-IS level(s) is enabled on these interfaces?（）
    A

    Level 1 only

    B

    Level 2 only

    C

    Level 1 and Level 2

    D

    Level 3 only


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are configuring new BGP neighbor and want to view the configuration for the interface ge-0/0/0.42.Which command do you use to achieve this result?（）
    A

    [edit protocols bgp group external]    user@router# set interfaces ge-0/0/0.42 ?

    B

    [edit protocols bgp group external]    user@router# edit show interfaces ge-0/0/0.42

    C

    [edit protocols bgp group external]    user@router# top show interfaces ge-0/0/0.42

    D

    [edit protocols bgp group external]    user@router# show interfaces ge0/0/0.42


    正确答案： C
    解析： 暂无解析

相关内容