单选题How should a DNS client be configured?（）A Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.B Edit the /etc/resolv.conf file to have a nameserver and a domain search order.C Edit the /etc/resolv.conf file to have a nameserve

题目
单选题
How should a DNS client be configured?（）
A

Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.

B

Edit the /etc/resolv.conf file to have a nameserver and a domain search order.

C

Edit the /etc/resolv.conf file to have a nameserver, domain, and domain search order.

D

Edit the /etc/netsvc.conf file to have a nameserver, domain, and domain search order.

相似考题

1.How does a controller-based access point configured to operate in sniffer mode behave？（）A、allows client traffic， captures data on all channelsB、allows client traffic， captures data on a single channelC、allows no client traffic， captures data on all channelsD、allows no client traffic， captures data on a single channel

2. A customer reports they are unable to connect to any computers outside of the office and they are unable to connect to the Internet. When the technician runs ipconfig, the customer gets the following output: IP address169.254.2.4 Subnet Mask.255.255.0.0 Default Gateway. Which of the following could be causing the issue?（）A、The subnet mask is not correctly configured.B、The DNS client has not been configured on the computer.C、The DHCP client is unable to obtain an IP address from the DHCP server.D、The default gateway is not specified

3. Your network consists of a single Active Directory domain named contoso.com. All servers runWindows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You have two DNS servers named DNS1.contoso.com and DNS2.contoso.com. All client computers are configured to use DNS1 as their preferred DNS server and DNS2 as an alternate DNS server. You need to verify that DNS1 is responding to name resolution queries from a client computer.  What should you run from the client computer?（）  A、Ipconfig.exe /displaydns.B、Nbtstat.exe Cr.C、Nslookup.exe - dns1.contoso.com.D、Ping.exe dns1.contoso.com.

4.How should a service representative provide closure at the end of a call for a client？（）A、Explain the issues of the call， the steps taken to resolve them and query the client if they have any additional needs.B、Explain the solution to the issue and then provide the client with the technicians contact information in case they have any questions.C、Give the client a technical explanation on the issue and how it was fixed； throw any faulty equipment in the clients garbage.D、Proceed to the next service call， check back with the client in a week to see if they have any additional needs.

参考答案和解析
正确答案： B
解析： 暂无解析
更多“How should a DNS client be configured?（）”相关问题

  • 第1题：

    Your company has an Active Directory domain named contoso.com. The company network has two   DNS servers named DNS1 and DNS2.   The DNS servers are configured as shown in the following table.   DNS1  DNS2   _msdcs.contoso.com  contoso.com  .(root)   _msdcs.contoso.com   contoso.com   Domain users, who are configured to use DNS2 as the preferred DNS server, are unable to connect to Internet Web sites.   You need to enable Internet name resolution for all client computers.   What should you do（）

    • A、Create a copy of the .（root） zone on DNS1.
    • B、Update the list of root hints servers on DNS2.
    • C、Update the Cache.dns file on DNS2. Configure conditional forwarding on DNS1.
    • D、Delete the .（root） zone from DNS2. Configure conditional forwarding on DNS2.

    正确答案:D

  • 第2题：

    You are designing a strategy for configuring a newly installed Windows Server 2003 computer to meet the Active Directory DNS requirements. How should you configure the computer?（）

    • A、As a caching-only DNS servers  
    • B、As the primary DNS server for the fourthcoffee.com DNS zone
    • C、With a stub zone for the fourthcoffee.com DNS zone hosted by the ISP  
    • D、As a secondary DNS server for the fourthcoffee.com DNS zone hosted by the ISP 

    正确答案:B

  • 第3题：

    Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）.The network contains two DNS servers named Server1 and Server2.  You deploy a DHCP server named Server3 and configure all client computers to receive their IP configurations automatically.You discover that all client computers use Server2 for host name resolution.You need to ensure that all client computers use Server1 for host name resolution.  What should you do？（）

    • A、On Server3， modify the DNS option.
    • B、On Server3， modify the DNS domain name option.
    • C、On Server2， modify the Preferred DNS server setting.
    • D、On each client computer， modify the properties of the DNS Client service.

    正确答案:A

  • 第4题：

    You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain have Windows Server 2012 R2 installed and all client computers have Windows 8 installed.All client computers are connected to the Internet via an Internet Proxy Server named ABC_SR11.You add the DNS Server role on a server named ABC_SR12 and  make ABC_SR12 the primary DNS server on the client computers.How would you ensure that ABC_SR12 does not perform name resolution of Internet host names for the client computers？（）

    • A、You should configure the DNS zone on ABC_SR12 as a stub zone.
    • B、You should configure the DNS zone on ABC_SR12 as an Active Directory-Integrated zone.
    • C、You should configure the DNS zone on ABC_SR12 as a Standard Primary zone.
    • D、You should configure the DNS zone on ABC_SR12 as a Secondary zone.

    正确答案:A

  • 第5题：

    单选题
    You are designing a strategy for configuring a newly installed Windows Server 2003 computer to meet the Active Directory DNS requirements.  How should you configure the computer？（）
    A

     As a caching-only DNS servers

    B

     As the primary DNS server for the fourthcoffee.com DNS zone

    C

     With a stub zone for the fourthcoffee.com DNS zone hosted by the ISP

    D

     As a secondary DNS server for the fourthcoffee.com DNS zone hosted by the ISP


    正确答案： B
    解析： 暂无解析

  • 第6题：

    单选题
    Your company has two offices. Each office is configured as a separate subnet. The network contains a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）. All client computers run Windows XP Professional Service Pack 3 （SP3）. Users report that they are unable to resolve host names on the Internet. You verify that users can access all servers on both subnets.You need to ensure that users can resolve names on the Internet. The solution must ensure that users can access resources on the internal network.  What should you configure？（）
    A

    all client computers to use the IP address of a DNS server on the Internet as the primary DNS server

    B

    all client computers to use the IP address of a DNS server on the Internet as the secondary DNS server

    C

    the internal DNS servers to use a forwarder

    D

    the internal DNS servers to use round robin


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    You want to provide all users in your corporation with a single agent that provides access to multiple connection types conditionally. For example, you connect to the Junos Pulse Access Control Service if you are connected to the intranet, but you connect to the Junos Pulse Secure Access Service if you are on a remote network. Which agent should you use for this type of connection requirement?（）
    A

    Junos Pulse should be configured with location awareness rules configured.

    B

    Odyssey Access Client should be installed with Host Checker configured to check the client's location.

    C

    Junos Pulse should be configured with all components installed.

    D

    Agentless access should be enabled so that clients can connect to any service without concern for installing an agent.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    You work as the Exchange administrator at Company.com.The Company.com network contains an Exchange Server 2010 Organization.Company.com has its headquarters in Paris where you are located.you are responsible for managing two exchange servers named -ex01 and -ex02.both exchange servers are configured to host the client access server role， the hub transport server role as well as the mailbox server role.terstkingex01 and -ex02 are members of a database availability group.during the course of the week you receive an instruction from management to ensure that users are able to make a connection to the client access server in the event of a single server failure. What should you do？（）
    A

    Your best option would be to have the Network Load Balancing feature installed on every server.Thereafter a second IP address should be assigned to every network adapter.

    B

    Your best option would be to have two new records created for the Client Access server from the DNS manager.

    C

    Your best option would be to have a hardware load balancer deployed. Then a DNS record should be created for the virtual IP address. Thereafter a Client Access server array should be configured.

    D

    Your best option would e to have a new service named Client Access Server created and a new IP address allocated from the Failover Cluster Manager.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Your company has a main office and a branch office.The network contains two DNS servers named DNS1 and DNS2.DNS1 is located in the main office. DNS1 hosts a primary standard zone named contoso.com. The contoso.com zone is configured to use DNSSEC.DNS2 is located in the branch office. DNS2 is a caching-only DNS server. You need to ensure that client computers in the branch office can receive authoritative responses to queries for contoso.com if a WAN link fails. DNSSEC security must be maintained.What should you configure on DNS2 for contoso.com？（）
    A

    a conditional forwarder

    B

    a secondary zone

    C

    a zone delegation

    D

    an Active Directory-integrated stub zone


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    The Acme Rocket Corporation is integrating their existing Octel voice mail system with Cisco CallManager Express. The Octel voice mail system has four ports and a voice mail pilot point of 53222. How should the CallManager Express be configured to support this integration? （）
    A

    A separate VoIP dial peer needs to be configured for the four pilot point numbers. 

    B

    Four dial peers need to be configured with the same pilot point number. 

    C

    Four ephone-dns and four ephones need to be configured with the same pilot point number. 

    D

    Four ephones and four dial peers need to be configured with the same pilot point number. 


    正确答案： A
    解析： 暂无解析

  • 第11题：

    You are employed as the enterprise exchange administrator at TestKing.com. The TestKing.com networkconsits of a single Active Directory site. TestKing.com makes use of Microsoft Exchange Servermessaging solution. You are in the process of planning the deployment of Exchange Server 2010. The CIO provides you withthe set criteria needed to deploy the Exchange Server 2010 servers. TestKing.com wants you to ensurethat： * The Mailbox servers belong to the database availability group （DAG）. * The users are able to send and receive e-mail in the event of a single server failure. * The minimization of the amount of servers deployed. * The load balancing of MAPI connections form Outlook Clients using hardware load balancer.You need to plan the deployment to the Exchange Server 2010 servers to meet the above criteria. What should you do？（）

    • A、Your plan should include deploying four servers.The Mailbox server role as well as the Hub Transport server role should be configured on two serversand the Client Access server role on the remaining two.Therafter a Client Access server array should be configured.
    • B、Your plan should include deploying two servers.The Mailbox server role， the Client Access server role as well as the Hub Transport server role shouldbe configured on the two servers there after a Client Access server array should be configured.
    • C、Your plan should include deploying four servers.The Mailbox server role should be deployed on two servers and the Client Access server role and theHub Transport server role on the remaining two.Therafter Outlook Anywhere should be enabled on both Client  Accessservers.
    • D、Your plan should include deploying two servers.The Mailbox serve role， the Client Access server role as well as the Hub Transport server role shouldbe deployed on the two servers.Thereafter Outlook Anywhere should be enabled on both Client Access Servers.

    正确答案:B

  • 第12题：

    You are designing the DNS zone to support the Active Directory domain for Contoso.Ltd.  Which two actions should you perform？ （）

    • A、 Create ad.contoso.com as a standard primary DNS Zone.
    • B、 Create ad.contoso.com as an Active DirectoryIntegrated DNS Zone.
    • C、 Enable only authorized client computers to update DNS.
    • D、 Configure a zone transfer between the DNS server at the ISP and the DNS servers at Contoso.Ltd.

    正确答案:B,C

  • 第13题：

    You work as a network administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers on the ABC.com network have Windows Server 2012 R2 installed and all client computers have Windows 8 installed.The ABC.com network has a single DNS server named ABC_SR09.The client computers are located in an organizational unit （OU） named ABCPCs.You add a new Windows Server 2012 R2 computer named ABC_SR10 to the network  and configure the computer as an Intrasite Automatic Tunnel Addressing Protocol （ISATAP） router. How would you enable the client computers to locate the ISATAP router through DNS？（）

    • A、You should run the netsh interface ipv6 install command on the client computers.
    • B、You should run the netsh interface ipv6 install command on ABC_SR10.
    • C、You should add the host （A） record isatap.ABC.com to the DNS zone.
    • D、You should add an IPv6 host （AAA） record for ABC_SR10 to the DNS zone.
    • E、You should run the Set-DnsServerGlobalQueryBlockList cmdlet on ABC_SR09.
    • F、You should run the Set NetIsatapConfiguration cmdlet on ABC_SR10.

    正确答案:C,E

  • 第14题：

    You are designing a strategy for configuring a newly installed Windows Server 2003 computer to meet the Active Directory DNS requirements.  How should you configure the computer？（）

    • A、 As a caching-only DNS servers
    • B、 As the primary DNS server for the fourthcoffee.com DNS zone
    • C、 With a stub zone for the fourthcoffee.com DNS zone hosted by the ISP
    • D、 As a secondary DNS server for the fourthcoffee.com DNS zone hosted by the ISP

    正确答案:B

  • 第15题：

    单选题
    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. Client computers run Windows XP Professional， Windows 2000 Professional， or Windows NT Workstation. All client computers are configured with default settings.A server named Server1 functions as a DHCP and DNS server. All client computers are configured to use Server1 for name resolution. All DNS zones on Server1 are enabled for DNS dynamic updates. The company’s written security policy states that， when possible， the computer account for each client computer should be the owner of its own DNS host record.A server named Server18 contains antivirus server software. Server18 must be able to contact client computers by using fully qualified domain names （FQDNs） to propagate virus definition updates.You need to ensure that Server18 can resolve FQDNs for all client computers on the network. Which option should you modify on Server1？（）
    A

    the Dynamically update DNS A and PTR records only if requested by the DHCP clients check box

    B

    the Always dynamically update DNS A and PTR records check box

    C

    the Discard A and PTR records when lease is deleted check box

    D

    the Dynamically update DNS A and PTR records for DHCP clients that do not request dynamic updates （for example， clients running Windows NT 4.0） check box


    正确答案： A
    解析： 暂无解析

  • 第16题：

    单选题
    Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The network contains two DNS servers named Server1 and Server2. You deploy a DHCP server named Server3 and configure all client computers to receive their IP configurations automatically. You discover that all client computers use Server2 for host name resolution. You need to ensure that all client computers use Server1 for host name resolution.  What should you do?（）
    A

    On Server3， modify the DNS option.

    B

    On Server3， modify the DNS domain name option.

    C

    On Server2， modify the Preferred DNS server setting.

    D

    On each client computer， modify the properties of the DNS Client service.


    正确答案： A
    解析： 暂无解析

  • 第17题：

    单选题
    How should a DNS client be configured？（）
    A

    Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.

    B

    Edit the /etc/resolv.conf file to have a nameserver and a domain search order.

    C

    Edit the /etc/resolv.conf file to have a nameserver， domain， and domain search order. 

    D

    Edit the /etc/netsvc.conf file to have a nameserver， domain， and domain search order.


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2. DNS1 is configured as the DNS server for contoso.com. All client computers are configured to use DNS1 for name resolution.From a client computer, you run the Ping tool as shown in the exhibit. (Click the Exhibit button.) You need to ensure that users can use the Ping tool to resolve the IP addresses of internal servers to fully qualified domain names (FQDNs).What should you do？（）
    A

    Create a GlobalNames zone.

    B

    Create a reverse lookup zone.

    C

    Create a forward lookup zone.

    D

    Enable zone transfers on the contoso.com zone.


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    You configure a new file server that runs Windows Server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files. The TCP/IP properties for the file server are configured as shown in the following exhibit.（exhibit not there again wtf!） You need to ensure that users are able to access the shared files. How should you configure the TCP/IP properties in the file server？（）
    A

    Configure a static IP address

    B

    Configure the default gateway

    C

    Configure the DNS server address

    D

    Add the domain to the DNS suffix on the network interface


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）
    A

    Stop and restart the DNS Client service.

    B

    Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.

    C

    Add an A （host） record for the computer to the DNS server’s zone file.

    D

    Configure your DHCP server to have a DNS server address of 10.1.1.5.


    正确答案： C
    解析： 暂无解析

相关内容