单选题Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）A Physically press the appropriate button on the system.B Physically disconnect and reconnect

题目
单选题
Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）
A

Physically press the appropriate button on the system.

B

Physically disconnect and reconnect the power cable on the system.

C

Log into the IVM using a Web Browser, select the managed-system and select the Power on option from the Operations menu.

D

Log into the HMC using a Web Browser, select the managed-system and select the Power on option from the Operations menu.

相似考题

1.请将下面程序补充完整。public class PowerCalc{public static void main(String[]args){double x=5.0;System. out. println(x+"to the power 4 is"+power(x, 4));System. out. println("7. 5 to the power 5 is"+power(7.5, 5));System. out. println("7.5 to the power 0 is"+power(7.5, 0));System. out. println("10 to the power -2 is"+power(10, -2));}static double【 】 (double x, int n){if(n＞1)return x * power(x, n-1);else if(n＜0)return 1.0/power(x, -n);elsereturn n==0 ? 1.0:x;}}

2.Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()A. There is a fire hazard potential if a power outage occurs.B. The last system plugged into the UPS will not be provided any power.C. The UPS will draw more power from the circuit to compensate.D. The runtime of the UPS will be insufficient if a power outage occurs.

3.A user reports the system runs fine for a few minutes and then freezes or locks up. Which of the following is the BEST cause of this issue?（）A、Memory is bad or not seated.B、Fans are failing.C、Power supply needs to be replaced.D、CD-ROM is faulty and needs to be replaced.

4.A technician needs to replace a computer’s hard drive. Which of the following should thetechnician do FIRST?()A. Remove network connectionsB. Remove the RAMC. Self ground on the computer caseD. Disconnect power to PC

参考答案和解析
正确答案： A
解析： 暂无解析
更多“单选题Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）A Physically press the appropriate button on the system.B Physically disconnect and reconnect”相关问题

  • 第1题：

    What is the FIRST step in diagnosing a completely dead computer that was working fine the day before？（）

    • A、remove all peripherals and reinstall them one at a time
    • B、replace the CMOS battery
    • C、check the AC power cord and verify the power source
    • D、back up the entire hard drive

    正确答案:C

  • 第2题：

    A server will not power on. Which of the following devices should the administrator use FIRST to determine the problem?（）

    • A、Loop back plugs
    • B、Power supply tester
    • C、System logs
    • D、TDR

    正确答案:B

  • 第3题：

    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply （UPS）？（）

    • A、 There is a fire hazard potential if a power outage occurs.
    • B、 The last system plugged into the UPS will not be provided any power.
    • C、 The UPS will draw more power from the circuit to compensate.
    • D、 The runtime of the UPS will be insufficient if a power outage occurs.

    正确答案:D

  • 第4题：

    A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700.  They would like to upgrade and plan for 40 TB capacity.  The customer needs to move to a more scalable storage system to include all servers.Which of the following would be most appropriate to ask first?（）

    • A、What are the plans for Disaster Recovery? 
    • B、What are the plans for data migration? 
    • C、Would iSCSI meet your needs? 
    • D、How much space is available in the current storage systems?

    正确答案:B

  • 第5题：

    A customer requires two 12X loops on their new POWER7 system. What is the smallest system that will support two loops?（）

    • A、Power 710
    • B、Power 720
    • C、Power 730
    • D、Power 740

    正确答案:D

  • 第6题：

    A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）

    • A、Remove the physical volume from the system.
    • B、Remove the physical volume from the volume group.
    • C、Remove the physical partitions from the volume group.
    • D、Remove the logical volume copies from the failing drive.

    正确答案:D

  • 第7题：

    单选题
    A data center has had a power outage. Which of the following should the administrator do FIRST once the power is restored?（）
    A

    Identify which systems are the most critical and bring them up by level of importance.

    B

    Retrieve the latest backup tapes for immediate system restore using the GFS rotation.

    C

    Identify the least critical systems and then power those systems on first.

    D

    Determine the cause of the power outage and install UPS systems to prevent its reoccurrence.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700.  They would like to upgrade and plan for 40 TB capacity.  The customer needs to move to a more scalable storage system to include all servers.Which of the following would be most appropriate to ask first?（）
    A

    What are the plans for Disaster Recovery? 

    B

    What are the plans for data migration? 

    C

    Would iSCSI meet your needs? 

    D

    How much space is available in the current storage systems?


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    What is the FIRST and most important step in system troubleshooting？（）
    A

    back up the system data

    B

    gather information about the problem

    C

    try rebooting the system to see if that fixes the problem

    D

    check the System Error Log or Event Log


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing， hdisk0， is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive？（）
    A

    Remove the physical volume from the system.

    B

    Remove the physical volume from the volume group.

    C

    Remove the physical partitions from the volume group.

    D

    Remove the logical volume copies from the failing drive.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    A server will not power on. Which of the following devices should the administrator use FIRST to determine the problem？（）
    A

     Loop back plugs

    B

     Power supply tester

    C

     System logs

    D

     TDR


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    To examine the Exhibit， press the Exhibit button. Using the "ps -mo THREAD" output as shown in the exhibit， which of the following conclusions is most appropriate to draw？（）
    A

     This is a uniprocessor system

    B

     The "prog" process has a nice value of 107

    C

     There are two active processors on this system

    D

     The "prog" process will only be scheduled to run on processor 0


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A computer boots up with the error "CMOS Checksum Failure." Which of the following components needs to be replaced？（）

    • A、power supply
    • B、CMOS chip
    • C、motherboard
    • D、CMOS battery

    正确答案:D

  • 第14题：

    A data center has had a power outage. Which of the following should the administrator do FIRST once the power is restored？ （）

    • A、 Identify which systems are the most critical and bring them up by level of importance.
    • B、 Retrieve the latest backup tapes for immediate system restore using the GFS rotation.
    • C、 Identify the least critical systems and then power those systems on first.
    • D、 Determine the cause of the power outage and install UPS systems to prevent its reoccurrence.

    正确答案:A

  • 第15题：

    A technician needs to replace a computer’s hard drive. Which of the following should thetechnician do FIRST?（）

    • A、Remove network connections
    • B、Remove the RAM
    • C、Self ground on the computer case
    • D、Disconnect power to PC

    正确答案:D

  • 第16题：

    Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）

    • A、Physically press the appropriate button on the system.
    • B、Physically disconnect and reconnect the power cable on the system.
    • C、Log into the IVM using a Web Browser, select the managed-system and select the Power on option from the Operations menu.
    • D、Log into the HMC using a Web Browser, select the managed-system and select the Power on option from the Operations menu.

    正确答案:A

  • 第17题：

    A system was running properly until a reboot. Following the reboot， the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next？（）

    • A、Power down then power up the system
    • B、Boot into diagnostic mode and run fsck
    • C、Boot from installation media and run bosboot
    • D、Boot into maintenance mode and check the bootlist

    正确答案:D

  • 第18题：

    A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700. They would like to upgrade and plan for 40 TB capacity. The customer needs to move to a more scalable storage system to include all servers. Which of the following would be most appropriate to ask first？（）

    • A、What are Disaster Recoveryplans
    • B、What are plans for datamigration
    • C、What storage system space isavailable
    • D、DoesiSCSI meet the needs

    正确答案:B

  • 第19题：

    单选题
    A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700. They would like to upgrade and plan for 40 TB capacity. The customer needs to move to a more scalable storage system to include all servers. Which of the following would be most appropriate to ask first？（）
    A

    What are Disaster Recoveryplans

    B

    What are plans for datamigration

    C

    What storage system space isavailable

    D

    DoesiSCSI meet the needs


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    Following an unscheduled power outage, theadministrator needs to power up an IVM-managed system. For the given system,what is the first step in this process?（）
    A

    Physically press the appropriate button on the system.

    B

    Physically disconnect and reconnect the power cable on the system.

    C

    Log into the IVM using a Web Browser, select the managed-system and select the Power on option from the Operations menu.

    D

    Log into the HMC using a Web Browser, select the managed-system and select the Power on option from the Operations menu.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    What is the FIRST step in diagnosing a completely dead computer that was working fine the day before？（）
    A

    remove all peripherals and reinstall them one at a time

    B

    replace the CMOS battery

    C

    check the AC power cord and verify the power source

    D

    back up the entire hard drive


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A data center has had a power outage. Which of the following should the administrator do FIRST once the power is restored？ （）
    A

     Identify which systems are the most critical and bring them up by level of importance.

    B

     Retrieve the latest backup tapes for immediate system restore using the GFS rotation.

    C

     Identify the least critical systems and then power those systems on first.

    D

     Determine the cause of the power outage and install UPS systems to prevent its reoccurrence.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?（）
    A

    There is a fire hazard potential if a power outage occurs.

    B

    The last system plugged into the UPS will not be provided any power.

    C

    The UPS will draw more power from the circuit to compensate.

    D

    The runtime of the UPS will be insufficient if a power outage occurs.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    多选题
    Which of the following are attributes of a hardware-based RAID controller？（）
    A

    Backs up data

    B

    Less expensive than software RAID

    C

    Vendor neutral implementation

    D

    Accessible through a BIOS interface

    E

    More host CPU usage than software RAID

    F

    Accessible through a system utility after the OS has been loaded

    G

    May retain data in the event of a power outage


    正确答案： D,G
    解析： 暂无解析

相关内容