A
B
C
D
第1题:
You plan to implement a Hyper-V host cluster. The cluster will contain two servers connected to a Storage Area Network (SAN). You need to recommend a storage location for virtual machine (VM) snapshots. The solution must ensure that the VMs can fail over. Which storage location should you recommend?()
第2题:
A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700. They would like to upgrade and plan for 40 TB capacity. The customer needs to move to a more scalable storage system to include all servers.Which of the following would be most appropriate to ask first?()
第3题:
A cluster administrator has been asked to install HACMP on two nodes with the following hardware: -two CPUs, - 1GB RAM, - one 1 36GB drive, -two 10/100/1000 Ethernet adapters, and -GB Fibre Channel adapters dual attached to SAN storage. In order to eliminate single points of failure,the administrator should first add which of the following:()
第4题:
A customer is planning a PowerHA cluster split across two sites. The sites are located 10km apart. There is aDS8000 storage array at each site with SAN connectivity between the two arrays. There are only enough IPinterfaces for one IP network in this cluster. How can they ensure that disk data is automatically mirrored and synchronized between sites?()
第5题:
You are designing a Hyper-V solution. You plan to virtualize an application server. The application server requires failover clustering that uses shared storage. You need to choose the correct storage solution. What should you choose?()
第6题:
You need to recommend the server configurations for the new failover cluster. The configurations must support the company's planned changes Which two actions should you recommend?()
第7题:
Purchase PowerHA/XD license
Purchase PowerHA with GLVM license
Implement PowerHA with split-site LVM
Implement PowerHA with cross-site LVM
第8题:
an additional 1GB RAM to each node.
Another bootable mirrored disk drive.
A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.
Nothing,because this is a viable cluster solution with no single points of failure.
第9题:
What are Disaster Recoveryplans
What are plans for datamigration
What storage system space isavailable
DoesiSCSI meet the needs
第10题:
Target mode fiber channel can be used with a SAN solution.
The heartbeat could be established by using a disk heartbeat.
An RS232 line driver can be used to extend the existing serial connection.
The NIM for the serial connection can be altered to compensate for the additional delay caused by the increased distance.
第11题:
Move the storage into a common SAN and virtualize the I/O using a single VIO Server with dual NIC connectors and dual HBAs
Move the existing physical network and storage adapters to the new system and virtualize the I/O using a single VIO Server.
Move the storage into a common SAN and virtualize the I/O using dual VIO Servers, each with dual NIC connectors and dual HBAs.
Move the storage into a common SAN and virtualize the I/O using dual VIO Servers, one with dual NIC connectors and the other with dual HBAs.
第12题:
Shut down one node at a time and let the other node serve the application
Stop HACMP with the forced option and perform migration of the disks on one node,then restart HACMP
Stop both nodes and perform the migration all at once using standard AIX commands in parallel, then restart the cluster
Use C-SPOC to add the new disks to the cluster and migrate the information off the existing disks, then remove the old disks with C-SPOC
第13题:
Which two statements about Network Attached Storage are correct?()
第14题:
A customer has several single partition POWER5 and POWER6 processor-based systems housed in regional data centers and wants to consolidate into a single Power 770. They must minimize overall cost and the number of adapters, while ensuring a reliable infrastructure. Which solution addresses the customer requirements?()
第15题:
Company.com is migrating from a third party managed disk subsystem to an IBM TotalStorage Enterprise Storage Server. Connection of the new storage server is complete, and it has been tested on all of the nodes in the three node HACMP cluster. How does the customer migrate to the new storage server with minimum down time?()
第16题:
A customer has a combination of fifteen Windows file servers with direct attached storage and three Power Systems with AIX database servers SAN attached to a DS4700. They would like to upgrade and plan for 40 TB capacity. The customer needs to move to a more scalable storage system to include all servers. Which of the following would be most appropriate to ask first?()
第17题:
Your network includes Windows Server 2008 R2 Hyper-V servers. You are configuring the servers in a failover cluster that will host highly available virtual machines (HAVMs). You plan to manage the servers in the cluster by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to design a storage solution for the cluster that allows you to migrate virtual machines (VMs) into and out of the cluster by using SAN migration. Which two actions should you include in your design?()
第18题:
You are designing a Hyper-V solution. You plan to virtualize an application server. The application server requires failover clustering that uses shared storage. You need to choose the correct storage solution. What should you choose?()
第19题:
SAN switches
Fibre channel Hub(s)
IBM Storage Manager Agents
IBM Subsystem Device Driver
第20题:
a domain-based Distributed File System (DFS) namespace
a network share
the SAN
a local hard disk
第21题:
What are the plans for Disaster Recovery?
What are the plans for data migration?
Would iSCSI meet your needs?
How much space is available in the current storage systems?
第22题:
Install fiber cards into the servers and add direct attached storage.
Install fiber cards into the servers and implement a SAN solution.
Attach a USB drive to one of the servers.
Add a NAS to the environment
第23题:
Install fiber cards into the servers and add direct attached storage.
Install fiber cards into the servers and implement a SAN solution.
Attach a USB drive to one of the servers.
Add a NAS to the environment.