单选题The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）A Jumper settings are incorrectB The RAM module is def

题目
单选题
The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）
A

Jumper settings are incorrect

B

The RAM module is defective

C

The memory slot is defective

D

CMOS needs to be flashed

相似考题

1.When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?()A. The memory is failing.B. The CPU is overheating.C. The hard drive is not attached properly.D. The operating system is not installed.

2.A technician has had several support requests for one PC. The technician has reseated the PCIcards and replaced the hard drive in the PC located in a school cafeteria kitchen. PCs located in the business office or the classrooms have not had this issue.Which of the following is MOST likely causing this PC’s issue?（）A. Faulty RAMB. 240 volt Kitchen outletsC. Power BrownoutsD. Excessive Heat

3.When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?（）A、The memory is failing.B、The CPU is overheating.C、The hard drive is not attached properly.D、The operating system is not installed.

4.New service from the telephone company is delivered over fiber, but the technician does not have a fiber module for the router. Which of the following would remedy this issue?()A. OTDRB. Media converterC. CSU/DSUD. Fiber repeater

更多“单选题The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）A Jumper settings are incorrectB The RAM module is def”相关问题

  • 第1题：

    A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）

    • A、The newly installed RAM has a lower clock speed than the existing RAM.
    • B、The CPU is not configured to work with the additional RAM.
    • C、The system is incompatible with the new RAM.
    • D、The new RAM is of lower quality, and not dependable at higher speeds.

    正确答案:A

  • 第2题：

    New service from the telephone company is delivered over fiber, but the technician does not have a fiber module for the router. Which of the following would remedy this issue?（）

    • A、OTDR
    • B、Media converter
    • C、CSU/DSU
    • D、Fiber repeater

    正确答案:B

  • 第3题：

    A technician has had several support requests for one PC. The technician has reseated the PCIcards and replaced the hard drive in the PC located in a school cafeteria kitchen. PCs located in the business office or the classrooms have not had this issue. Which of the following is MOST likely causing this PC’s issue?（）

    • A、Faulty RAM
    • B、240 volt Kitchen outlets
    • C、Power Brownouts
    • D、Excessive Heat

    正确答案:D

  • 第4题：

    The technician is repairing a PC which appears to have a failing RAM module. After replacing the module, the extra memory still is not registering. Which of the following is MOST likely the issue?（）

    • A、Jumper settings are incorrect
    • B、The RAM module is defective
    • C、The memory slot is defective
    • D、CMOS needs to be flashed

    正确答案:C

  • 第5题：

    A technician is replacing memory in a server whose motherboard supports PC100 or PC133 memory.  This type of memory is also known as which of the following？（）

    • A、SDRAM
    • B、RAMBUS
    • C、DDR2
    • D、DDR3

    正确答案:A

  • 第6题：

    While upgrading an existing x445 with a second SMP expansion module and four processors， a technician notices the SMP connector cables are missing on the back， so the technician connects the cables.  Upon powering up， the technician notices the upper SMP expansion module is disabled.  Which of the following is the most likely cause of the problem？（）

    • A、The system requires 220V power to enable the upper SMP expansion module.
    • B、The technician cabled the SMP expansions wrong.
    • C、The Xcel4 cache needs to be reset in the BIOS because of the addition of the second SMP expansion module.
    • D、If no hardware licenses keys have been purchased for the processors in the upper SMP expansion module， it will not be activated.

    正确答案:B

  • 第7题：

    单选题
    A customer is experiencing problems with a rack mount server. The problem might be a failing memory module. Which of the following can be used to find the failing module without going to the physical server？（）
    A

    Light Path Diagnostics

    B

    Remote Presence

    C

    Integrated Management Module （IMM）

    D

    Advanced Management Module （AMM）


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A technician has a laptop in for repair with a consistent video corruption issue. The issue is seen on the local display and on an external monitor. The issue happens on the BIOS setup screen as well as within Windows. Which of the following laptop components is MOST likely failing?（）
    A

    VGA port

    B

    LCD display

    C

    Onboard video card

    D

    Inverter


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）
    A

    Install only two modules as the RAM has to be installed in pairs

    B

    Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parity

    C

    Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboard

    D

    Install the RAM.Two modules will perform as dual channel and one as single channel


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is replacing memory in a server whose motherboard supports PC100 or PC133 memory.  This type of memory is also known as which of the following？（）
    A

    SDRAM

    B

    RAMBUS

    C

    DDR2

    D

    DDR3


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    When Bob, a technician, powers up a desktop PC, the unit will repeat three short beeps and will not POST. Which of the following is MOST likely the problem?（）
    A

    The memory is failing.

    B

    The CPU is overheating.

    C

    The hard drive is not attached properly.

    D

    The operating system is not installed.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A technician has had several support requests for one PC. The technician has reseated the PCIcards and replaced the hard drive in the PC located in a school cafeteria kitchen. PCs located in the business office or the classrooms have not had this issue. Which of the following is MOST likely causing this PC’s issue?（）
    A

    Faulty RAM

    B

    240 volt Kitchen outlets

    C

    Power Brownouts

    D

    Excessive Heat


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A technician has a laptop in for repair with a consistent video corruption issue. The issue is seen on the local display and on an external monitor. The issue happens on the BIOS setup screen as well as within Windows. Which of the following laptop components is MOST likely failing?（）

    • A、VGA port
    • B、LCD display
    • C、Onboard video card
    • D、Inverter

    正确答案:C

  • 第14题：

    After a technician installs a new CMOS battery on a motherboard, which of the following will thetechnician have to change? （）

    • A、Firmware version
    • B、System date/time
    • C、Bus speeds
    • D、Jumper settings

    正确答案:B

  • 第15题：

    A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）

    • A、Install only two modules as the RAM has to be installed in pairs
    • B、Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parity
    • C、Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboard
    • D、Install the RAM.Two modules will perform as dual channel and one as single channel

    正确答案:C

  • 第16题：

    When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）

    • A、Out-of-date BIOS
    • B、Invalid motherboard jumper settings
    • C、Failing power supply
    • D、Floppy disk in the drive

    正确答案:D

  • 第17题：

    A customer is experiencing problems with a rack mount server. The problem might be a failing memory module. Which of the following can be used to find the failing module without going to the physical server？（）

    • A、Light Path Diagnostics
    • B、Remote Presence
    • C、Integrated Management Module （IMM）
    • D、Advanced Management Module （AMM）

    正确答案:C

  • 第18题：

    单选题
    New service from the telephone company is delivered over fiber, but the technician does not have a fiber module for the router. Which of the following would remedy this issue?（）
    A

    OTDR

    B

    Media converter

    C

    CSU/DSU

    D

    Fiber repeater


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    A technician is performing a memory upgrade by installing an additional 1GB stick of DDR RAM into a system. When the installation is complete, the computer shows 2GB of RAM at POST; however, it now indicates a lower speed setting for the memory. Which of the following is the MOST likely cause?（）
    A

    The newly installed RAM has a lower clock speed than the existing RAM.

    B

    The CPU is not configured to work with the additional RAM.

    C

    The system is incompatible with the new RAM.

    D

    The new RAM is of lower quality, and not dependable at higher speeds.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    A technician is replacing memory in a server whose motherboard supports PC2100 memory.  This type of memory is also known as which of the following？（）
    A

    DDR2

    B

    DDR

    C

    SDRAM

    D

    DDR3


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A technician is replacing memory in a server whose motherboard supports PC3-8500 memory.  This type of memory is also known as which of the following？（）
    A

    SDRAM

    B

    DDR

    C

    DDR3

    D

    DDR2


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）
    A

    Out-of-date BIOS

    B

    Invalid motherboard jumper settings

    C

    Failing power supply

    D

    Floppy disk in the drive


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    While upgrading an existing x445 with a second SMP expansion module and four processors， a technician notices the SMP connector cables are missing on the back， so the technician connects the cables.  Upon powering up， the technician notices the upper SMP expansion module is disabled.  Which of the following is the most likely cause of the problem？（）
    A

    The system requires 220V power to enable the upper SMP expansion module.

    B

    The technician cabled the SMP expansions wrong.

    C

    The Xcel4 cache needs to be reset in the BIOS because of the addition of the second SMP expansion module.

    D

    If no hardware licenses keys have been purchased for the processors in the upper SMP expansion module， it will not be activated.


    正确答案： B
    解析： 暂无解析

相关内容