多选题Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100. Which of the f

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）

A. Subnet number

B. Next - hop router IP address of the route

C. Whether the route is an E1 or E2 route

D. The ro ute‘s tag

E. The number of router hops between the router and the subnet

Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（）External data:Originating router is 10.1.1.1AS number of route is 1External protocol is OSPF, external metric is 64Administrator tag is 0 (0x00000000)

A. R1 is the router that redistributed the route

B. R1‘s metric to reach subnet 10.2.2.0/24 is 64

C. The route was redistributed on a router that has a router ospf 1 command configured

D. R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

R1 is internal to area 1, and R2 is internal to area 2. Subnet 10.1.1.0/24 exists in area 2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2.Which of the following LSAs must R1 use when calculating R1‘s best route for 10.1.1.0/24?（）

A. R2‘s Type 1 LSA

B. Subnet 10.1.1.0/24‘s Type 2 LSA

C. ABR1‘s Type 1 LSA in area 0

D. Subnet 10.1.1.0/24‘s Type 3 LSA in Area 0

E. Subnet 10.1.1.0/24‘s Type 3 LSA in Area 1

Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table?Note that RD refers to reported distance and FD to feasible distanc E.（）

A. Adds all routes for which the metric is <= 200 * the best metric among all routes

B. Adds all routes because of the ridiculously high variance setting

C. Adds all successor and feasible successor routes

D. Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100.Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）

A.Bandwidth of 101,500

B.Bandwidth of about 34,000

C.Bandwidth of 500

D.Delay of 1200

E.Delay of 2010

F.Delay of 20100

Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true?（）

A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

R1, an ABR between backbone area 0 and area 1, has intra - area routes in area 0 for 10.1.1.0/24,10.1.2.0/24, and 10.1.3.0/24. These routes have metrics of 21, 22, and 23, respectively. An engineer then adds the area 0 r ange 10.1.0.0 255.255.0.0 command under the OSPF process of R1.Which of the following is true?（）

A. R1 loses and then re - establishes neighborships with all neighbors.

B. R1 no longer advertises 10.1.1.0/24 to neighbors into area 1.

C. R1 advertises a 1 0.1.0.0/16 route into area 1 with a metric of 23 (largest metric).

D. R1 advertises a 10.1.0.0/16 route into area 1 with metric of 21 (lowest metric).

Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers.Which of the following is true on R1?（）

A. The show ip ospf neighbors command lists two neighbors off Fa0/0.

B. The show ip ospf neighbors command lists four neighbors off Fa0/0.

C. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.

D. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

Refer to the exhibit. EIGRP had converged in AS 1 when the link between router R1 and R2 went down. The console on router R2 generated the following messages:*Mar 20 12:12:06: %DUAL - 5NBRCHANG E: IP - EIGRP 1: Neighbor 10.1.4.3 (Serial0) is down: stuck in active*Mar 20 12:15:23: %DUAL -3- SIA: Route 10.1.1.0/24 stuck - in - active state in IP - EIGRP 1.Cleaning up The network administrator issued the show ip eigrp topology active command on R2 to check the status of the EIGRP network.Which statement best describes the reason for the error messages?（）

A. Incorrect bandwidth configuration on router R3 prevents R2 from establishing neighbor adjacency.

B. Incorrect bandwidth configuration on router R 5 prevents R2 from establishing neighbor adjacency.

C. Router R3 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

D. Router R5 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

A. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24.

B. Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0.

C. Router R1 is waiting for a reply from the neighb or 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable.

D. Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10.6.1.0/24.