Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1‘s interface S0/0?（）A. FEA0::200:

题目

Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1‘s interface S0/0?（）

A. FEA0::200:FF:FE11:0

B. FE80::200:FF:FE11:1111

C. FE80::0213:19FF:FE7B:0:1

D. FEB0::211:11FF:FE11: 1111

相似考题

1.Which two loopback types are supported for serial interfaces on Juniper devices?()A.LocalB.Far EndC.RemoteD.Bidirectional

2.At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）A. a serial cable with a V.35 to RJ45 adapterB. a CSU/DSUC. an external ISDN TA and NT1D. The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

3.Refer to the exhibit. On the basis of the output, what two conclusions can be reached?()A. The default administrative distance has been changed.B. IS - IS is not enabled.C. Three physical interfaces are taking part in integrated IS - IS.D. IS - IS is not redistributing any oth er routing protocols.E. There are two neighboring routers sending IS - IS routing information.F. Address summarization is configured.

4.When policy － based routing (PBR) is being configured, which three criteria can the set command specify?()A. all interfaces in the path toward the destinationB. all networks in the path toward the destinationC. adjacent next hop router in the path toward the destinationD. all routers in the path toward the destinationE. all interfaces through which the packets can be routedF. type of service and precedence in the IP packets

更多“Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the int ”相关问题

  • 第1题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第2题：

    Refer to the exhibit. A network associate has configured OSPF with the command:City(config-router) network 192.168.12.64 0.0.0.63 area 0After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? （）

    A.FastEthernet0 /0

    B.FastEthernet0 /1

    C.Serial0/0

    D.Serial0/1.102

    E.Serial0/1.103

    F.Serial0/1.104


    参考答案：B, C, D

  • 第3题：

    Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. The single serial link b etween the two routers uses IP addresses 10.1.1.1 and 10.1.1.2, respectively. Both routers use their S0/0 interfaces for this link. Which of the following commands would be needed on R1 to configure eBGP?（）

    • A、router bgp 2
    • B、router bgp 1
    • C、neighbor 10.1 .1.2 remote - as 2
    • D、neighbor 10.1.1.2 Update - source 10.1.1.1
    • E、neighbor 10.1.1.2 Update- source S0/0

    正确答案:B,C

  • 第4题：

    When policy - based routing (PBR) is being configured, which three criteria can the set command specify?（）

    • A、all interfaces in the path toward the destination
    • B、all networks in the path toward the destination
    • C、adjacent next hop router in the path toward the destination
    • D、all routers in the path toward the destination
    • E、all interfaces through which the packets can be routed
    • F、type of service and precedence in the IP packets

    正确答案:C,E,F

  • 第5题：

    Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router. Which of the following could be the link local address of R1's interface S0/0?（）

    • A、FEA0::200:FF:FE11:0
    • B、FE80::200:FF:FE11:1111
    • C、FE80::0213:19FF:FE7B:0:1
    • D、FEB0::211:11FF:FE11: 1111

    正确答案:B

  • 第6题：

    Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?（） ipv6 unicast- routing interface f0/0 ipv6 rip one enable ipv6 address 2000::1/64 interface s0/0/0 ipv6 address 2001::/64 eui - 64 ipv6 rip one enable

    • A、RIPng will be enabled on no interfaces.
    • B、RIPng will be enabled on one interface.
    • C、RIPng will  be enabled on two interfaces.
    • D、RIPng will advertise about prefixes connected to S0/0/0 and F0/0, but only send Updates on one interface.

    正确答案:B

  • 第7题：

    Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100. Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）

    • A、Bandwidth of 101,500
    • B、Bandwidth of about 34,000
    • C、Bandwidth of 500
    • D、Delay of 1200
    • E、Delay of 2010
    • F、Delay of 20100

    正确答案:C,E

  • 第8题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    • A、a serial cable with a V.35 to RJ45 adapter
    • B、a CSU/DSU
    • C、an external ISDN TA and NT1
    • D、The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

    正确答案:C

  • 第9题：

    单选题
    A router has two FastEthernet interfaces and needs to connect to four vlans in the local network.How canyou accomplish this task，using the fewest physical interfaces and withoutdecreasing networkperformance？（）
    A

    Add two more FastEthernet interfaces.

    B

    Add a second router to handle the vlan traffic.

    C

    Use a hub to connect the four vlans with a FastEthernet interface on router.

    D

    Implement a router-on-a-stick configuration.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    What is the functionality of redundant interfaces （reth） in a chassis cluster？（）
    A

    reth interfaces are used only for VRRP.

    B

    reth interfaces are the same as physical interfaces.

    C

    reth interfaces are pseudo-interfaces that are considered the parent interface for two physical interfaces.

    D

    Each cluster member has a reth interface that can be used to share session state information with the other cluster members.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?（） ipv6 unicast- routing interface f0/0 ipv6 rip one enable ipv6 address 2000::1/64 interface s0/0/0 ipv6 address 2001::/64 eui - 64 ipv6 rip one enable
    A

    RIPng will be enabled on no interfaces.

    B

    RIPng will be enabled on one interface.

    C

    RIPng will  be enabled on two interfaces.

    D

    RIPng will advertise about prefixes connected to S0/0/0 and F0/0, but only send Updates on one interface.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    Which router IOS commands can be used to troubleshoot LAN connectivity problems?（）
    A

    ping

    B

    tracert

    C

    ipconfig

    D

    show ip route

    E

    winipcfg

    F

    show interfaces


    正确答案： A,D,E
    解析： 暂无解析

  • 第13题：

    An etwork administrator has enabled OSPF across an NBMA network and has issued the command ip ospf network nonbroadcast. Given those facts, which two statements are true?()

    A. Interfaces will automatically detect and build adjacencies with neighbor routers

    B. DR and BDR elections will not occur

    C. DR and BDR elections will occur

    D. The neighbor command is required to build adjacencies

    E. All routers must be configured in a fully meshed topology with all other routers


    参考答案：C, D

  • 第14题：

    What does the command udld reset accomplish？（）

    • A、allows an UDLD port to automatically reset when it has been shutdown
    • B、resets all UDLD enabled ports that have been shutdown
    • C、removes all UDLD configurations from interfaces that were globally enabled
    • D、removes all UDLD configurations from interfaces that were enabled per-port

    正确答案:B

  • 第15题：

    Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. There are two parallel serial links between the two rou ters. The implementation plan calls for each router to base their BGP TCP connection on their respective loopback1 interfaces, with IP addresses 1.1.1.1 and 2.2.2.2, respectively. Which of the following commands would not be part of a working eBGP confi guration on Router R1?（）

    • A、router bgp 1
    • B、neighbor 2.2.2.2 remote- as 2
    • C、neighbor 2.2.2.2 update - source loopback1
    • D、neighbor 2.2.2.2 multihop 2

    正确答案:D

  • 第16题：

    Which statement is true about the SDM QoS wizard and its ability to enable a QoS policy on router interfaces？（）

    • A、QoS can be enabled on interfaces used for Easy VPN clients
    • B、QoS can be enabled on IPsec VPN interfaces and tunnels
    • C、QoS can be enabled on interfaces with an existing QoS policy
    • D、the QoS policy can be enabled for incoming and outgoing traffic on the interface

    正确答案:B

  • 第17题：

    A router has two FastEthernet interfaces and needs to connect to four vlans in the local network.How can you accomplish this task,using the fewest physical interfaces and without decreasing network performance?（）

    • A、Add two more FastEthernet interfaces.
    • B、Add a second router to handle the vlan traffic.
    • C、Use a hub to connect the four vlans with a FastEthernet interface on router.
    • D、Implement a router-on-a-stick configuration.

    正确答案:D

  • 第18题：

    A network planning diagram shows a large internetwork with many routers. The configurations show that OSPF has been enabled on all interfaces, I P addresses correctly configured, and OSPF workinG. For which of the following cases would you expect a router to create and flood a Type 2 LSA?（）

    • A、When OSPF is enabled on a LAN interface, and the router is the only router connected to the subnet.
    • B、  When OSPF is enabled on a point - to -point serial link, and that router has both the higher router ID and higher interface IP address on the link.
    • C、When OSPF is enabled on a Frame Relay point - to - point subinterface, has the lower RID and lower subinterfa ce IP address, and otherwise uses default OSPF configuration on the interface.
    • D、When OSPF is enabled on a working LAN interface on a router, and the router has been elected BDR.
    • E、None of the other answers is correct.

    正确答案:E

  • 第19题：

    An etwork administrator has enabled OSPF across an NBMA network and has issued the command ip ospf network nonbroadcast. Given those facts, which two statements are true?（）

    • A、Interfaces will automatically detect and build adjacencies with neighbor routers
    • B、DR and BDR elections will not occur
    • C、DR and BDR elections will occur
    • D、The neighbor command is required to build adjacencies
    • E、All routers must be configured in a fully meshed topology with all other routers

    正确答案:C,D

  • 第20题：

    单选题
    Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router. Which of the following could be the link local address of R1's interface S0/0?（）
    A

    FEA0::200:FF:FE11:0

    B

    FE80::200:FF:FE11:1111

    C

    FE80::0213:19FF:FE7B:0:1

    D

    FEB0::211:11FF:FE11: 1111


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    Which two loopback types are supported for serial interfaces on Juniper devices?（）
    A

    Local

    B

    Far End

    C

    Remote

    D

    Bidirectional


    正确答案： B,D
    解析： 暂无解析

  • 第22题：

    单选题
    Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. There are two parallel serial links between the two rou ters. The implementation plan calls for each router to base their BGP TCP connection on their respective loopback1 interfaces, with IP addresses 1.1.1.1 and 2.2.2.2, respectively. Which of the following commands would not be part of a working eBGP confi guration on Router R1?（）
    A

    router bgp 1

    B

    neighbor 2.2.2.2 remote- as 2

    C

    neighbor 2.2.2.2 update - source loopback1

    D

    neighbor 2.2.2.2 multihop 2


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    Which three options are prerequisites to configuring Cisco AutoOoS？（）
    A

    Cisco Express Forwarding （CEF） must be globally enabled.

    B

    Prior to the enabling of the Cisco AutoOoS feature， the bandwidth command must be applied on all interfaces or subinterfaces.

    C

    After the enabling of the Cisco AutoOoS feature， the bandwidth command must be applied on all interfaces or subinterfaces .

    D

    OoS policies must be enabled on all interfaces that will participate in the AutoOoS configuration.

    E

    An IP address must be configured on all low-bandwidth interfaces （768 kb/s or lower） that will participate in the AutoOoS configuration

    F

    An IP address must be configured on all interfaces that will participate in the AutoOoS configuration


    正确答案： A,B
    解析： 暂无解析

相关内容