单选题After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）A Examine the boot

题目
单选题
After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）
A

Examine the bootlog with the command： alog -o -f /var/adm/ras/bootlog

B

Display the device attributes and errors with the command： lsdev -C -l ent0

C

Examine the AIX errlog for configuration method errors with the command： errpt -a -C ent0

D

Examine the ODM for configuration errors with the command： odmget -q method_errors ent0

相似考题

1.An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）A、Move the RAID adapter to another slot.B、Perform a baseline of the system.C、Contact the reseller of the adapter for a replacement card.D、Check the RAID adapter’s manufacturer for the latest drivers.

2.After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）A、Examine the bootlog with the command： alog -o -f /var/adm/ras/bootlogB、Display the device attributes and errors with the command： lsdev -C -l ent0C、Examine the AIX errlog for configuration method errors with the command： errpt -a -C ent0D、Examine the ODM for configuration errors with the command： odmget -q "method_errors" ent0

3.An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.

4.A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）A、Reinstall the CDE softwareB、Check the name resolutionC、Uncomment the last line in .dtprofileD、Boot in maintenance mode and perform fsck on file systems

更多“单选题After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）A Examine the boot”相关问题

  • 第1题：

    Before installing an operating system on a server， which of the following is the BEST resource for an administrator to review the compatibility of the OS with the video card？（）

    • A、Server manual
    • B、Manufacturer website
    • C、IEEE standards
    • D、HCL

    正确答案:D

  • 第2题：

    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot.  Which of the following is the FIRST thing the administrator should check？（）

    • A、 Default gateway
    • B、 The ports on the switch
    • C、 Port security on the servers switch port
    • D、 Ethernet cable

    正确答案:A

  • 第3题：

    An administrator installs a new network card in a properly functioning DC. During the Windows boot up process the DC bluescreens. Which of the following is the NEXT step?（）

    • A、Press F8 and boot to Directory Services Restore Mode.
    • B、Press F8 and boot to Last Known Good Configuration.
    • C、Reboot the server again.
    • D、Press F8 and boot to Safe Mode.

    正确答案:A

  • 第4题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第5题：

    A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）

    • A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.
    • B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.
    • C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.
    • D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.

    正确答案:B

  • 第6题：

    单选题
    The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）
    A

     The SCSI card is not seated correctly.

    B

     The termination is incorrectly set on the SCSI card.

    C

     The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.

    D

     Operating system patches were not updated before installing the card.


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）
    A

    An 8-port adapter to the HMC

    B

    A hub for the private network

    C

    An additional Ethernet card to the HMC

    D

    An additional Ethernet card for each partition


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot.  Which of the following is the FIRST thing the administrator should check？（）
    A

     Default gateway

    B

     The ports on the switch

    C

     Port security on the servers switch port

    D

     Ethernet cable


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）
    A

    The hard drives were not plugged into the server correctly.

    B

    The controller driver is outdated and needs to be updated from the OEMs website.

    C

    The firmware for the server is too old and does not support the new RAID controller card.

    D

    The cable from the controller to the hard drive backplane is not connected.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator installs a new network card in a properly functioning DC. During the Windows boot up process the DC bluescreens. Which of the following is the NEXT step？（）
    A

    Press F8 and boot to Directory Services Restore Mode.

    B

    Press F8 and boot to Last Known Good Configuration.

    C

    Reboot the server again.

    D

    Press F8 and boot to Safe Mode.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）
    A

    All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.

    B

    There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.

    C

    The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.

    D

    The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    An administrator installs a new network card in a properly functioning DC. During the Windows bootup process the DC bluescreens. Which of the following is the NEXT step？（）

    • A、 Press F8 and boot to Directory Services Restore Mode.
    • B、 Press F8 and boot to Last Known Good Configuration.
    • C、 Reboot the server again.
    • D、 Press F8 and boot to Safe Mode.

    正确答案:B

  • 第14题：

    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot. Which of the following is the FIRST thing the administrator should check?（）

    • A、Default gateway
    • B、The ports on the switch
    • C、Port security on the server's switch port
    • D、Ethernet cable

    正确答案:A

  • 第15题：

    The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting， the operating system does not detect the card. Which of the following is the MOST likely cause of the problem？（）

    • A、 The SCSI card is not seated correctly.
    • B、 The termination is incorrectly set on the SCSI card.
    • C、 The SCSI card is not listed on the operating system HCL （Hardware Compatibility List）.
    • D、 Operating system patches were not updated before installing the card.

    正确答案:C

  • 第16题：

    Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC. Which of the following will allow them to connect all servers to the HMC?（）

    • A、An 8-port adapter to the HMC
    • B、A hub for the private network
    • C、An additional Ethernet card to the HMC
    • D、An additional Ethernet card for each partition

    正确答案:B

  • 第17题：

    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）

    • A、The new system requires 1 installed processor card for the GX++ bus adapter
    • B、The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter
    • C、The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter
    • D、The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter

    正确答案:B

  • 第18题：

    单选题
    A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）
    A

    Reinstall the CDE software

    B

    Check the name resolution

    C

    Uncomment the last line in .dtprofile

    D

    Boot in maintenance mode and perform fsck on file systems


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）
    A

    The new system requires 1 installed processor card for the GX++ bus adapter

    B

    The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter

    C

    The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter

    D

    The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    A system administrator has filesystems that should not be mounted during system startup. How can the system administrator prevent the /data filesystem from being mounted during subsequent boots？（）
    A

    mount -no /data

    B

    chfs -A no /data

    C

    mount -t nfs /data

    D

    chfs -a type=nfs /data


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Before installing an operating system on a server， which of the following is the BEST resource for an administrator to review the compatibility of the OS with the video card？（）
    A

    Server manual

    B

    Manufacturer website

    C

    IEEE standards

    D

    HCL


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator installs a new network card in a properly functioning DC. During the Windows bootup process the DC bluescreens. Which of the following is the NEXT step？（）
    A

     Press F8 and boot to Directory Services Restore Mode.

    B

     Press F8 and boot to Last Known Good Configuration.

    C

     Reboot the server again.

    D

     Press F8 and boot to Safe Mode.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）
    A

    Examine the bootlog with the command： alog -o -f /var/adm/ras/bootlog

    B

    Display the device attributes and errors with the command： lsdev -C -l ent0

    C

    Examine the AIX errlog for configuration method errors with the command： errpt -a -C ent0

    D

    Examine the ODM for configuration errors with the command： odmget -q method_errors ent0


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： C
    解析： 暂无解析

相关内容