单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the

题目
单选题
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）
A

The hard drives were not plugged into the server correctly.

B

The controller driver is outdated and needs to be updated from the OEMs website.

C

The firmware for the server is too old and does not support the new RAID controller card.

D

The cable from the controller to the hard drive backplane is not connected.

相似考题

1.An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware

2.An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）A、Move the RAID adapter to another slot.B、Perform a baseline of the system.C、Contact the reseller of the adapter for a replacement card.D、Check the RAID adapter’s manufacturer for the latest drivers.

3. An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）A、 Check the backplane cabling.B、 Check the server BIOS.C、 Update the RAID controller firmware.D、 Install the latest hard drive firmware.

4.A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system’s administrator has decided to mirror two drives for the operating system. Which of the following is the maximum space the administrator will have remaining to use for data when using RAID 0？（）A、292GBB、438GBC、584GBD、728GB

更多“单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the”相关问题

  • 第1题：

    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）

    • A、Check the backplane cabling.
    • B、Check the server BIOS.
    • C、Update the RAID controller firmware.
    • D、Install the latest hard drive firmware

    正确答案:A

  • 第2题：

    An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）

    • A、The hard drives were not plugged into the server correctly.
    • B、The controller driver is outdated and needs to be updated from the OEMs website.
    • C、The firmware for the server is too old and does not support the new RAID controller card.
    • D、The cable from the controller to the hard drive backplane is not connected.

    正确答案:C

  • 第3题：

    An administrator notes that after a recent power outage， some open files were corrupted on oneaffected file server. Which of the following items should the administrator consider to determine the cause of this corruption？（）

    • A、 The servers memory
    • B、 The servers RAID controller battery
    • C、 The servers processor
    • D、 The servers NIC teaming configuration

    正确答案:B

  • 第4题：

    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

    • A、Update the time and date in the BIOS.
    • B、Update the firmware on the SCSI controller.
    • C、Update the firmware to the latest version.
    • D、Configure IPMI on the new board.

    正确答案:A

  • 第5题：

    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?（）

    • A、The server BIOS firmware is out-of-date.
    • B、The server does not have the correct drivers.
    • C、The server hard drives have not begun to spin.
    • D、The server has too little memory installed.

    正确答案:A

  • 第6题：

    多选题
    Which three should be documented after upgrading a SCSI RAID controller？（）
    A

    disk utilization

    B

    installation date

    C

    adapter baselines

    D

    location slot of the RAID controller

    E

    status of the adapter card installation

    F

    RAID controller information （warranty， specifications etc.）


    正确答案： F,A
    解析： 暂无解析

  • 第7题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows？（）
    A

    Update the time and date in the BIOS.

    B

    Update the firmware on the SCSI controller.

    C

    Update the firmware to the latest version.

    D

    Configure IPMI on the new board.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system’s administrator has decided to mirror two drives for the operating system. Which of the following is the maximum space the administrator will have remaining to use for data when using RAID 0？（）
    A

    292GB

    B

    438GB

    C

    584GB

    D

    728GB


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）
    A

     The power supply is not sufficient to power the server.

    B

     The voltage regulator module （VRM） was not installed.

    C

     The IRQ setting was not set.

    D

     The DMA setting was not set.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller.  Which of the following must be done before booting the server back into Windows？（）
    A

     Update the time and date in the BIOS.

    B

     Update the firmware on the SCSI controller.

    C

     Update the firmware to the latest version.

    D

     Configure IPMI on the new board.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）
    A

    The hard drives were not plugged into the server correctly.

    B

    The controller driver is outdated and needs to be updated from the OEMs website.

    C

    The firmware for the server is too old and does not support the new RAID controller card.

    D

    The cable from the controller to the hard drive backplane is not connected.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）
    A

     Check the backplane cabling.

    B

     Check the server BIOS.

    C

     Update the RAID controller firmware.

    D

     Install the latest hard drive firmware.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    An administrator notes that after a recent power outage, some open files were corrupted on one affected file server. Which of the following items should the administrator consider to determine the cause of this corruption?（）

    • A、The server's memory
    • B、The server's RAID controller battery
    • C、The server's processor
    • D、The server's NIC teaming configuration

    正确答案:B

  • 第14题：

    Before installing a firmware update on a RAID controller which of the following should be done？（）

    • A、 Check for corresponding driver updates.
    • B、 Rebuild any arrays on the controller.
    • C、 Check for corresponding OS updates.
    • D、 Install a redundant BIOS on the controller.

    正确答案:A

  • 第15题：

    Which three should be documented after upgrading a SCSI RAID controller？（）

    • A、 disk utilization
    • B、 installation date
    • C、 adapter baselines
    • D、 location slot of the RAID controller
    • E、 status of the adapter card installation
    • F、 RAID controller information （warranty， specifications etc.）

    正确答案:B,D,F

  • 第16题：

    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）

    • A、 The power supply is not sufficient to power the server.
    • B、 The voltage regulator module （VRM） was not installed.
    • C、 The IRQ setting was not set.
    • D、 The DMA setting was not set.

    正确答案:B

  • 第17题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第18题：

    单选题
    An administrator notes that after a recent power outage， some open files were corrupted on oneaffected file server. Which of the following items should the administrator consider to determine the cause of this corruption？（）
    A

     The servers memory

    B

     The servers RAID controller battery

    C

     The servers processor

    D

     The servers NIC teaming configuration


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this？（）
    A

    The server BIOS firmware is out-of-date.

    B

    The server does not have the correct drivers.

    C

    The server hard drives have not begun to spin.

    D

    The server has too little memory installed.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）
    A

    Check the backplane cabling.

    B

    Check the server BIOS.

    C

    Update the RAID controller firmware.

    D

    Install the latest hard drive firmware


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present.  Which of the following could be the reason for this？（）
    A

     The server BIOS firmware is out-of-date.

    B

     The server does not have the correct drivers.

    C

     The server hard drives have not begun to spin.

    D

     The server has too little memory installed.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator notes that after a recent power outage, some open files were corrupted on one affected file server. Which of the following items should the administrator consider to determine the cause of this corruption?（）
    A

    The server's memory

    B

    The server's RAID controller battery

    C

    The server's processor

    D

    The server's NIC teaming configuration


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： C
    解析： 暂无解析

相关内容