单选题Which of the following must occur when installing SCSI devices into the server？（）ATerminate the back end of the chain.BSet the jumper to device ID 0.CTerminate both ends of the chain.DSet the jumper to cable select.

题目
单选题
Which of the following must occur when installing SCSI devices into the server？（）
A

 Terminate the back end of the chain.

B

 Set the jumper to device ID 0.

C

 Terminate both ends of the chain.

D

 Set the jumper to cable select.

相似考题

1.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

2.Which of the following settings is the jumper set to when installing a DVD－RW as the second device on an IDE cable?()A. ID0B. ID2C. Cable selectD. Master

3.Which of the following must occur when installing SCSI devices into the server?()A. Terminate the back end of the chain.B. Set the jumper to device ID 0.C. Terminate both ends of the chain.D. Set the jumper to cable select.

4.A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller.Which of the following is the MOST likely cause of the problem?（）A. Both hard drives have the master jumper in place.B. One hard drive is set as master and the other slave.C. The hard drive data cable is reversed.D. Both hard drives have the cable select jumper in place.

更多“单选题Which of the following must occur when installing SCSI devices into the server？（）A  Terminate the back end of the chain.B  Set the jumper to device ID 0.C  Terminate both ends of the chain.D  Set the jumper to cable select.”相关问题

  • 第1题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）

    A. You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B. You must set the same VTP management domain name on both switches.

    C. You must set all ports on the two switches as access ports.

    D. You must configure one of the switches as a VTP server.

    E. You must use a rollover cable to connect the two switches.


    参考答案：B, D

  • 第2题：

    When installing processors with mixed stepping levels in a server， which of the following guidelines must be followed？ （）

    • A、 The processors must have different frequencies set to operate.
    • B、 The processor with the highest feature set must be the bootstrap processor.
    • C、 The processors must have different cache sizes set to operate.
    • D、 The processors must have the same cache size set.
    • E、 The processor with the lowest feature set must be the bootstrap processor.

    正确答案:D,E

  • 第3题：

    Which of the following settings is the jumper set to when installing a DVD-RW as the second deviceon an IDE cable？（）

    • A、 ID0
    • B、 ID2
    • C、 Cable select
    • D、 Master

    正确答案:C

  • 第4题：

    In which of the following locations would a technician set the LBA mode for a hard drive？（）

    • A、Jumper Settings
    • B、Disk Manager
    • C、Device Manager
    • D、System BIOS

    正确答案:D

  • 第5题：

    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

    • A、 SCSI cable
    • B、 SCSI interface adapter on the tape library
    • C、 SCSI termination card on the server
    • D、 iSCSI cable

    正确答案:A

  • 第6题：

    When installing external SCSI devices, terminators are required on?（）

    • A、the SCSI adapter.
    • B、each device.
    • C、the first device.
    • D、the last device.
    • E、the server's parallel port.

    正确答案:A,D

  • 第7题：

    单选题
    Which of the following must occur when installing SCSI devices into the server?（）
    A

    Terminate the back end of the chain.

    B

    Set the jumper to device ID 0.

    C

    Terminate both ends of the chain.

    D

    Set the jumper to cable select.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）
    A

    The second hard drive has not been formatted for NTFS.

    B

    The jumpers on both drives are set to the cable select position.

    C

    The jumper on the first drive is set to master and the second is set to slave.

    D

    The jumpers on both drives are set to the master position.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）
    A

     SCSI cable

    B

     SCSI interface adapter on the tape library

    C

     SCSI termination card on the server

    D

     iSCSI cable


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    When installing external SCSI devices, terminators are required on?（）
    A

    the SCSI adapter.

    B

    each device.

    C

    the first device.

    D

    the last device.

    E

    the server's parallel port.


    正确答案： D,A
    解析： 暂无解析

  • 第12题：

    多选题
    When installing processors with mixed stepping levels in a server， which of the following guidelines must be followed？ （）
    A

    The processors must have different frequencies set to operate.

    B

    The processor with the highest feature set must be the bootstrap processor.

    C

    The processors must have different cache sizes set to operate.

    D

    The processors must have the same cache size set.

    E

    The processor with the lowest feature set must be the bootstrap processor.


    正确答案： D,C
    解析： 暂无解析

  • 第13题：

    Which of the following settings is the jumper set to when installing a DVD-RW as the second device on an IDE cable?（）

    • A、ID0
    • B、ID2
    • C、Cable select
    • D、Master

    正确答案:C

  • 第14题：

    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）

    • A、Both hard drives have the master jumper in place.
    • B、One hard drive is set as master and the other slave.
    • C、The hard drive data cable is reversed.
    • D、Both hard drives have the cable select jumper in place.

    正确答案:A

  • 第15题：

    Which of the following must occur when installing SCSI devices into the server？（）

    • A、 Terminate the back end of the chain.
    • B、 Set the jumper to device ID 0.
    • C、 Terminate both ends of the chain.
    • D、 Set the jumper to cable select.

    正确答案:C

  • 第16题：

    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

    • A、The second hard drive has not been formatted for NTFS.
    • B、The jumpers on both drives are set to the cable select position.
    • C、The jumper on the first drive is set to master and the second is set to slave.
    • D、The jumpers on both drives are set to the master position.

    正确答案:D

  • 第17题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第18题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第19题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）
    A

    Use a jumper from the motherboard where the new drive is going to be installed.

    B

    Use a jumper from a hard drive that is no longer functioning.

    C

    Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.

    D

    The new hard drive must be replaced


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following must occur when installing SCSI devices into the server？（）
    A

     Terminate the back end of the chain.

    B

     Set the jumper to device ID 0.

    C

     Terminate both ends of the chain.

    D

     Set the jumper to cable select.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following settings is the jumper set to when installing a DVD-RW as the second deviceon an IDE cable？（）
    A

     ID0

    B

     ID2

    C

     Cable select

    D

     Master


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）
    A

    Both hard drives have the master jumper in place.

    B

    One hard drive is set as master and the other slave.

    C

    The hard drive data cable is reversed.

    D

    Both hard drives have the cable select jumper in place.


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following settings is the jumper set to when installing a DVD-RW as the second device on an IDE cable?（）
    A

    ID0

    B

    ID2

    C

    Cable select

    D

    Master


    正确答案： D
    解析： 暂无解析

相关内容